[asterisk-r2] OpenVox TE210P/TE212P dual-span T1/E1/J1 card 3.3V + E1 + openr2 + ETECSA(Cuba)
r0d0
rodolfo at dic.ohc.cu
Tue Sep 13 08:29:57 CDT 2011
resuelto... enlace señalizado cas!!!!! gracias
On Sat, 2011-09-03 at 15:55 -0500, Juan Pablo Villarreal Montoya wrote:
> Hola rodolfo.
>
> Yo haría las siguientes pruebas:
> 1. Quitar crc4 en el system.conf
> 2. Poner busydetect=no y comentar busycount=3 en el
> chan_dahdi.conf.
> 3. Los parámetros maxani y maxdnis, colocarlos con la sintaxis de
> los demás parámetros, es decir mfcr2_max_ani= y
> mfcr2_max_dnis=. Además, creo qeu el valor de maxdnis en 4,
> sólo te permite llamar a números de 4 dígitos.
> Otras cosa que se debe tener en cuenta es quién genera el timing.
>
> On Fri, Sep 2, 2011 at 12:37 PM, r0d0 <rodolfo at dic.ohc.cu> wrote:
> hola a todos, necesito ayuda, mi escenario es este..
>
> OpenVox-Communication controller: Digium, Inc. Wildcard
> TE210P/TE212P
> dual-span T1/E1/J1 card 3.3V (rev 02)
> Elastix-2.0.3-i386
> Asterisk 1.6.2.13
> DAHDI Version: 2.3.0.1 Echo Canceller: OSLEC
> libopenr2-1.3.0-0
>
> hola a todos necesito saber si mi enlace E1+R2 está levantado,
> pruebo
> con el r2test pero no logra ejecutar una llamada de prueba
> para saber si
> hay tráfico en el canal y el enlace está bien configurado, me
> guié para
> la configuración por openr2-guide-0.3.pdf escrita por el Sr.
> Moises
> Silva y sigo sin poder ejecutar una llamada con el r2test,
> aquí dejo la
> config de mi servidor, el debug del r2test y otro poco de
> información
> para ver si alguien puede ayudarme..
> gracias de antemano
>
>
> ****************************************
>
> mainpbx*CLI> dahdi show status
> Description Alarms IRQ bpviol
> CRC4
> Fra Codi Options LBO
> T2XXP (PCI) Card 0 Span 1 OK 0 0
> 0
> CAS HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1)
> T2XXP (PCI) Card 0 Span 2 UNCONFI 0 0
> 0
> CAS Unk 0 db (CSU)/0-133 feet (DSX-1)
>
>
>
> *******************************************
>
>
> [root at mainpbx openr2]# r2test -c r2test.conf
> found category = NATIONAL_SUBSCRIBER
> found Log Level = all
> found option callfiles=no
> found R2 variant = itu
> found MAX ANI= 10
> found MAX DNIS= 4
> found option Get ANI First = yes
> found option Use DAHDI MF = no
> found option MF threshold = 0
> found option MF backward timeout = -1
> found option meteringpulsetimeout=-1
> found option collectcalls=no
> found option chargecalls=yes
> found option doubleanswer=no
> found option immediateaccept=no
> found option skipcategory=no
> found channel range = 1-1
> found DNID = 052789779
> found CID = 7714
> Spawned 1 listener threads, waiting for them to be ready ...
> channel 1, variant = ITU
> [08:26:894][CAS TRACE] Channel 1 -- CAS Tx >> [IDLE] 0x08
> [08:26:894][CAS TRACE] Channel 1 -- CAS Raw Tx >> 0x09
> [08:26:894][DEBUG] Channel 1 -- Bits changed from 0x00 to 0x08
> [08:26:894][CAS TRACE] Channel 1 -- CAS Rx << [IDLE] 0x08
> USER: far end unblocked on chan 1
> Spawned 0 calling threads, waiting for all threads ...
> [11:03:946][DEBUG] Channel 1 -- Bits changed from 0x08 to 0x00
> [11:03:946][CAS TRACE] Channel 1 -- CAS Rx << [SEIZE] 0x00
> [11:03:946][DEBUG] Channel 1 -- Initialized R2 MF detector
> [11:03:946][CAS TRACE] Channel 1 -- CAS Tx >> [SEIZE ACK] 0x0C
> [11:03:946][CAS TRACE] Channel 1 -- CAS Raw Tx >> 0x0D
> USER: new call detected on chan 1
>
>
>
> *****************************************************
> system.conf
>
> span=1,1,0,cas,hdb3,crc4
> cas=1-15:1101
> dchan=16
> cas=17-31:1101
> echocanceller=oslec,1-15,17-31
> loadzone = us
> defaultzone=us
>
>
> *****************************************************
> chan_dahdi.conf
>
>
> [trunkgroups]
>
> [channels]
> context=from-pstn
> signalling=mfcr2
> rxwink=300 ; Atlas seems to use long (250ms)
> winks
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=no
> faxdetect=incoming
> echotraining=800
> rxgain=0.0
> txgain=0.0
> callgroup=1
> pickupgroup=1
> maxani=7
> maxdnis=4
> mfcr2_variant=itu
> mfcr2_category=national_subscriber
> mfcr2_mfback_timeout=-1
> ;call logging parameters
> mfcr2_logdir=/etc/asterisk/span1
> mfcr2_call_files=yes
> mfcr2_logging=all
>
> ;Uncomment these lines if you have problems with the
> disconection of
> your analog lines
> busydetect=yes
> busycount=3
>
>
> immediate=no
>
> #include dahdi-channels.conf
> #include chan_dahdi_additional.conf
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by
> http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-r2
>
>
>
> --
> Juan Pablo Villarreal
> Ingeniero Electrónico
> email: jvillarreal at opengroupsa.com
>
> Santiago de Cali
> Colombia
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-r2
More information about the asterisk-r2
mailing list