[asterisk-r2] pueden funcionar libpri y openr2 al mismo tiempo??

[Bryce Chidester]

2011/10/12 jam <johans.a at gmail.com>

> Please, do you have some tips o configurations samples for this?
>
> El 12 de octubre de 2011 20:01, Bryce Chidester <brycec at rhinoequipment.com
> > escribió:
>
> 2011/10/12 jam <johans.a at gmail.com>
>>
>>> Saludos lista estoy en la siguiente situacion: Tengo un enlace E1 aca
>>> en Venezuela con R2, por lo que uso  OPENR2, todo ok hasta aca, pero ahora
>>> tengo que integrar unos Channels banks Rhino CBS de 24 FXS, estos equipos
>>> solo hablan sobre T1 por lo que mi poca experiencia me dice que tengo que
>>> usar Libpri para ponerlos en funcionamiento. mi duda es, los puedo instalar
>>> ambos? o mas importate aun, funcianan ambos al mismo tiempo en la misa pbx?
>>> alguien lo ha echo?..
>>>
>>> --
>>> ADS. Johans Angulo.
>>> CCNA CSC011350315
>>> Telf. 04265586486
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-r2 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>
>>
>>
>>
>> Actually Johans,
>> The Rhino CB24 does not require libpri. The CB24 is robbed-bit/CAS, just
>> like R2, but all the signaling is done in the signaling bits. There is no
>> need for libpri.
>>
>> (Google Translate back to Spanish)
>> El CB24 Rhino no requiere libpri. El CB24 es robbed-bit/CAS, al igual que
>>  R2, pero todas las señales se realiza en los bits de señalización. No
>> hay necesidad de libpri.
>>
>> Regards,
>> Bryce Chidester
>> Rhino Equipment
>> bryce at rhinoequipment.com
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>
>
>
>
> --
> ADS. Johans Angulo.
> CCNA CSC011350315
> Telf. 04265586486
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>


It should be relatively straight-forward. Be sure your T1 card is configured
in T1 mode for the CB24 port. Your zaptel.conf/system.conf would then add an
entry for the CB24FXS that looks like
span=2,0,0,esf,b8zs
fxoks=33-56
The above assumes the CB24FXS is on span 2.
You would add something like this do your zapata.conf/chan_dahdi.conf
signalling = fxo_ks
channel => 33-56
You would naturally need to set the proper context= etc lines to fit your
dialplan.


Regards,
Bryce Chidester
Rhino Equipment
bryce at rhinoequipment.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20111012/fe06804d/attachment-0001.htm>