[asterisk-r2] MFCR2 - CAS Seize or 0x00 when apply changes on freepbx .

[Marcio Oliveira]

   Hi Guys ,

   I realized that the problem is related to the dahdi module inside Freepbx
. After disable dahdi module inside Freepbx i was able to apply the changes
and my channels doesn't get Seize or 0x0 . Probably there is a bug on
Freepbx dahdi module .

    Thanks !

2011/8/30 Juan Carlos Huerta <juancarloshuerta at gmail.com>

> Gerardo and Moises are right, try to use a standard version. :)
>
> 2011/8/30, Gerardo Barajas <gerardo.barajas at gmail.com>:
>  > Haven't seen that Issue.
> > Perhaps you can try with another distro such as Elastix, or Trixbox.
> >
> >
> >
> > On Tue, Aug 30, 2011 at 12:14 PM, Marcio Oliveira <bymarcrj at gmail.com
> >wrote:
> >
> >>    Hi , thanks for your response .
> >>
> >>    Asterisk version i'm using is 1.6.2.20 and openr2 1.2 .
> >>
> >>    So , is there an way to update openr2 ? any special procedure ?
> >>
> >>     Thank you !
> >> 2011/8/30 Moises Silva <moises.silva at gmail.com>
> >>
> >>> My advice would be upgrade openr2 and asterisk to 1.6.2 (not sure what
> >>> asterisknow 1.7 is), this may be already fixed. This kind of problems
> >>> are very hard to troubleshoot.
> >>>
> >>> On Tue, Aug 30, 2011 at 10:40 AM, Marcio Oliveira <bymarcrj at gmail.com>
> >>> wrote:
> >>> >
> >>> >   Hi ,
> >>> >
> >>> >   I have a system up and running , integrated with legacy PBX Nec
> Neax
> >>> 2000
> >>> > . I'm using asterisknow 1.7 , a digium card TE407P ( E1 ) and openr2
> >>> > 1.2
> >>> (
> >>> > native from asterisknow ) in Brazil .
> >>> >
> >>> >   The only issue i have is :
> >>> >
> >>> >    - When i apply changes on freepbx ( create an extensios ) and
> reload
> >>> it
> >>> > ,my channels get Seize and the only way to back this to the normal
> >>> > state
> >>> ,
> >>> > Idle , is restart asterisk ( tx channels get back to Idle but RX are
> >>> 0x00 )
> >>> > and then disconnect the cable from balun and connect again . After do
> >>> this
> >>> > all channels get back to idle state and i'm able to make and receive
> >>> calls .
> >>> >
> >>> >   So , do you have an idea about how to fix this ?.
> >>> >
> >>> >    Thanks in advance !
> >>> >
> >>> >      Marcio .
> >>> >
> >>> > --
> >>> > _____________________________________________________________________
> >>> > -- Bandwidth and Colocation Provided by http://www.api-digital.com--
> >>> >
> >>> > asterisk-r2 mailing list
> >>> > To UNSUBSCRIBE or update options visit:
> >>> >   http://lists.digium.com/mailman/listinfo/asterisk-r2
> >>> >
> >>>
> >>> --
> >>> _____________________________________________________________________
> >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> >>>
> >>> asterisk-r2 mailing list
> >>> To UNSUBSCRIBE or update options visit:
> >>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
> >>
> >>
> >>
> >> --
> >> _____________________________________________________________________
> >> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> >>
> >> asterisk-r2 mailing list
> >> To UNSUBSCRIBE or update options visit:
> >>   http://lists.digium.com/mailman/listinfo/asterisk-r2
> >>
> >
>
> --
> Enviado desde mi dispositivo móvil
>
> Juan Carlos
> ~ Lo que no te mata te fortalece ~
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20111010/37f0037a/attachment.htm>