[asterisk-r2] mfcr2_metering_pulse_timeout no difference; outgoing calls being dropped

[Sebastian Peschko]

Thanks Moy. As always you're the man! 
This worked and our customer is happy. This seems to be related to
glitches that Telmex has on their lines and is loosing signaling for
very short periods of time 20 or 30 ms. We have some of their "planta
externa" out there now checking. We'll have to keep the pressure up to
get the source of this problem resolved. It looks like this is also
related to the bad copper quality and the Watson adapter they have
installed with the customer.

Here is the summary of what we have done to compensate for the state
changes originally mentioned.
We added the following line to /etc/asterisk/chan_dahdi.conf:
mfcr2_advanced_protocol_file=/usr/etc/r2proto.conf

In /usr/etc/r2proto.conf we commented out all lines except one:
timer.cas_persistance_check=100

-- 
Sebastian Peschko <speschko at gmail.com>

On Wed, 2011-05-11 at 10:29 -0500, Sebastian Peschko wrote:

> OK. ....first time around didn't work...I'll try again. Thanks.
> -- 
> Sebastian Peschko <speschko at gmail.com>
> 
> 
> On Wed, 2011-05-11 at 11:15 -0400, Moises Silva wrote: 
> 
> > On Wed, May 11, 2011 at 11:12 AM, Sebastian Peschko
> > <speschko at gmail.com> wrote:
> > 
> >         Thanks Moy.
> >         The only problem I have now is that when I activate
> >         r2proto.conf with
> >         'mfcr2_advanced_protocol_file=/usr/etc/r2proto.conf' the E1
> >         no longer works because I suspect that the settings in this
> >         file are not conform with what we should have in Mexico. Can
> >         I comment out all other parameters (which means it should
> >         take the 'mx' defaults) and just add the
> >         'timer.cas_persistance_check=100'?
> >         
> > 
> > 
> > 
> > Yes
> > 
> > Moises Silva
> > Senior Software Engineer, Software Development Manager
> > Sangoma Technologies Inc. | 100 Renfrew Drive, Suite 100, Markham ON
> > L3R 9R6 Canada
> > t. 1 905 474 1990 x128 | e. moy at sangoma.com
> > 
> > 
> > 
> > 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20110511/08268d5d/attachment-0001.htm>