[asterisk-r2] asterisk-r2 Digest, Vol 31, Issue 3

Mon Mar 14 18:51:46 CDT 2011

Hola Gustavo: proba el parámetro mfcr2_get_ani_first=yes o
 mfcr2_get_ani_first=no, ya que a veces las PABX y las telcos solicitan o no
el ANI y no te toman completamente el DNIS. Por otra parte, poné la cantidad
real de DNIS que vas a recibir, por las dudas que haya una falla ahi
también.
Saludos,

Benjamín Garzón

On Mon, Mar 14, 2011 at 8:26 PM, <asterisk-r2-request at lists.digium.com>wrote:

> Send asterisk-r2 mailing list submissions to
>        asterisk-r2 at lists.digium.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
>        http://lists.digium.com/mailman/listinfo/asterisk-r2
> or, via email, send a message with subject or body 'help' to
>        asterisk-r2-request at lists.digium.com
>
> You can reach the person managing the list at
>        asterisk-r2-owner at lists.digium.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of asterisk-r2 digest..."
>
>
> Today's Topics:
>
>   1. Re: FreeSwitch MFCR2 (Fernando Berretta)
>   2. Re: FreeSwitch MFCR2 (Moises Silva)
>   3. llamadas solo en una direccion (Gustavo Chavira)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 14 Mar 2011 15:36:36 -0300
> From: Fernando Berretta <fernando.berretta at gmail.com>
> Subject: Re: [asterisk-r2] FreeSwitch MFCR2
> Cc: asterisk-r2 at lists.digium.com
> Message-ID: <4D7E6034.5090706 at gmail.com>
> Content-Type: text/plain; charset="utf-8"; Format="flowed"
>
> Moises,
>
> Thanks for information provided, would be great to know when you have it
> done (just in case you do that) meanwhile I'll continue analyzing the
> feasibility to start our project over FreeSwitch / Windows
>
> Best Regards,
> Fernando
>
> On 3/14/2011 1:20 PM, Moises Silva wrote:
> > It is possible as I've done it several times. However you need Sangoma
> > cards (DAHDI cards do not work in Windows) and as of now you need
> > openr2 from svn trunk. It is very stable, the only reason I've not
> > done a release for openr2 2.0 with Windows support is lack of time.
> >
> > Moises Silva
> > Senior Software Engineer
> > Sangoma Technologies Inc. | 100 Renfrew Drive, Suite 100, Markham ON
> > L3R 9R6 Canada
> > t. 1 905 474 1990 x128 | e. moy at sangoma.com <mailto:moy at sangoma.com>
> >
> >
> > On Mon, Mar 14, 2011 at 11:05 AM, Fernando Berretta
> > <fernando.berretta at gmail.com <mailto:fernando.berretta at gmail.com>>
> wrote:
> >
> >     Hi,
> >
> >     Does somebody know if it possible to use E1 boards with MFC R2
> >     under FreeSwitch running on Windows platforms ?
> >
> >     Best Regards,
> >     Fernando
> >
> >     --
> >     _____________________________________________________________________
> >     -- Bandwidth and Colocation Provided by http://www.api-digital.com--
> >
> >     asterisk-r2 mailing list
> >     To UNSUBSCRIBE or update options visit:
> >     http://lists.digium.com/mailman/listinfo/asterisk-r2
> >
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.digium.com/pipermail/asterisk-r2/attachments/20110314/9869a82d/attachment-0001.htm
> >
>
> ------------------------------
>
> Message: 2
> Date: Mon, 14 Mar 2011 19:17:17 -0400
> From: Moises Silva <moises.silva at gmail.com>
> Subject: Re: [asterisk-r2] FreeSwitch MFCR2
> To: asterisk-r2 at lists.digium.com
> Message-ID:
>        <AANLkTi=y7-zdy-wU0KvVxVRqiC5oNOO8uwKBskRKq_1m at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> I'll post to this mailing list when openr2 2.0 is released.
>
> Moises Silva
> Senior Software Engineer
> Sangoma Technologies Inc. | 100 Renfrew Drive, Suite 100, Markham ON L3R
> 9R6
> Canada
> t. 1 905 474 1990 x128 | e. moy at sangoma.com
>
>
> On Mon, Mar 14, 2011 at 2:36 PM, Fernando Berretta <
> fernando.berretta at gmail.com> wrote:
>
> >  Moises,
> >
> > Thanks for information provided, would be great to know when you have it
> > done (just in case you do that) meanwhile I'll continue analyzing the
> > feasibility to start our project over FreeSwitch / Windows
> >
> > Best Regards,
> >
> > Fernando
> >
> > On 3/14/2011 1:20 PM, Moises Silva wrote:
> >
> > It is possible as I've done it several times. However you need Sangoma
> > cards (DAHDI cards do not work in Windows) and as of now you need openr2
> > from svn trunk. It is very stable, the only reason I've not done a
> release
> > for openr2 2.0 with Windows support is lack of time.
> >
> > Moises Silva
> > Senior Software Engineer
> > Sangoma Technologies Inc. | 100 Renfrew Drive, Suite 100, Markham ON L3R
> > 9R6 Canada
> > t. 1 905 474 1990 x128 | e. moy at sangoma.com
> >
> >
> > On Mon, Mar 14, 2011 at 11:05 AM, Fernando Berretta <
> > fernando.berretta at gmail.com> wrote:
> >
> >> Hi,
> >>
> >> Does somebody know if it possible to use E1 boards with MFC R2 under
> >> FreeSwitch running on Windows platforms ?
> >>
> >> Best Regards,
> >> Fernando
> >>
> >> --
> >> _____________________________________________________________________
> >> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> >>
> >> asterisk-r2 mailing list
> >> To UNSUBSCRIBE or update options visit:
> >>  http://lists.digium.com/mailman/listinfo/asterisk-r2
> >>
> >
> >
> > --
> > _____________________________________________________________________
> > -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> >
> > asterisk-r2 mailing list
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-r2
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.digium.com/pipermail/asterisk-r2/attachments/20110314/f1515625/attachment-0001.htm
> >
>
> ------------------------------
>
> Message: 3
> Date: Mon, 14 Mar 2011 16:23:47 -0700
> From: Gustavo Chavira <gchavira at e-electrosystems.com>
> Subject: [asterisk-r2] llamadas solo en una direccion
> To: asterisk-r2 at lists.digium.com
> Message-ID:
>        <AANLkTimuqYd643YqyMM_Fr+gRTQ6XMLP2MM_bTfBjvm7 at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Que tal a todos, tengo un problema con un enlace E1 conectado a una central
> ericsson bp.
>
> Extensiones sip si pueden realizar llamadas hacia extensiones ericsson.
> Pero
> de ericsson a polycom no se puede. El log que tengo es el siguiente. Las
> extensiones que el ericsson esta tratando de alcanzar son 2XXXX, y en el
> log
> solo recibo el 2 de inicio en el DNIS. Posteriormente envio 6 en lugar de
> mandar 1 para recibir el siguiente digito.
>
> *[Mar 14 12:49:00] DEBUG[12916] chan_dahdi.c: Chan 6 - Bits changed from
> 0x08 to 0x00
> [Mar 14 12:49:00] DEBUG[12916] chan_dahdi.c: Chan 6 - CAS Rx << [SEIZE]
> 0x00
> [Mar 14 12:49:00] DEBUG[12916] chan_dahdi.c: Chan 6 - Initialized R2 MF
> detector
> [Mar 14 12:49:00] DEBUG[12916] chan_dahdi.c: Chan 6 - CAS Tx >> [SEIZE ACK]
> 0x0C
> [Mar 14 12:49:00] DEBUG[12916] chan_dahdi.c: Chan 6 - CAS Raw Tx >> 0x0D
> [Mar 14 12:49:00] VERBOSE[12916] chan_dahdi.c: New MFC/R2 call detected on
> chan 6.
> [Mar 14 12:49:01] DEBUG[12916] chan_dahdi.c: Chan 6 - MF Rx << 2 [ON]
> [Mar 14 12:49:01] DEBUG[12916] chan_dahdi.c: Chan 6 - Getting DNIS digit 2
> [Mar 14 12:49:01] DEBUG[12916] chan_dahdi.c: Chan 6 - DNIS so far: 2,
> expected length: 15*
> [Mar 14 12:49:01] DEBUG[12916] chan_dahdi.c: Chan 6 - MF Tx >> 6 [ON]
> [Mar 14 12:49:01] DEBUG[12916] chan_dahdi.c: Chan 6 - MF Rx << 2 [OFF]
> [Mar 14 12:49:01] DEBUG[12916] chan_dahdi.c: Chan 6 - MF Tx >> 6 [OFF]
> [Mar 14 12:49:01] DEBUG[12916] chan_dahdi.c: Chan 6 - MF Rx << 2 [ON]
> [Mar 14 12:49:01] DEBUG[12916] chan_dahdi.c: Chan 6 - MF Tx >> 1 [ON]
> [Mar 14 12:49:01] DEBUG[12916] chan_dahdi.c: Chan 6 - MF Rx << 2 [OFF]
> [Mar 14 12:49:01] DEBUG[12916] chan_dahdi.c: Chan 6 - MF Tx >> 1 [OFF]
> [Mar 14 12:49:02] DEBUG[12916] chan_dahdi.c: Chan 6 - MF Rx << 0 [ON]
> [Mar 14 12:49:02] DEBUG[12916] chan_dahdi.c: Chan 6 - Getting ANI digit 0
> [Mar 14 12:49:02] DEBUG[12916] chan_dahdi.c: Chan 6 - ANI so far: 0,
> expected length: 10
> [Mar 14 12:49:02] DEBUG[12916] chan_dahdi.c: Chan 6 - MF Tx >> 1 [ON]
> [Mar 14 12:49:02] DEBUG[12916] chan_dahdi.c: Chan 6 - MF Rx << 0 [OFF]
> [Mar 14 12:49:02] DEBUG[12916] chan_dahdi.c: Chan 6 - MF Tx >> 1 [OFF]
> [Mar 14 12:49:02] DEBUG[12916] chan_dahdi.c: Chan 6 - MF Rx << 5 [ON]
> [Mar 14 12:49:02] DEBUG[12916] chan_dahdi.c: Chan 6 - Getting ANI digit 5
> [Mar 14 12:49:02] DEBUG[12916] chan_dahdi.c: Chan 6 - ANI so far: 05,
> expected length: 10
> [Mar 14 12:49:02] DEBUG[12916] chan_dahdi.c: Chan 6 - MF Tx >> 1 [ON]
> [Mar 14 12:49:02] DEBUG[12916] chan_dahdi.c: Chan 6 - MF Rx << 5 [OFF]
> [Mar 14 12:49:02] DEBUG[12916] chan_dahdi.c: Chan 6 - MF Tx >> 1 [OFF]
> [Mar 14 12:49:02] DEBUG[12916] chan_dahdi.c: Chan 6 - MF Rx << 1 [ON]
> [Mar 14 12:49:02] DEBUG[12916] chan_dahdi.c: Chan 6 - Getting ANI digit 1
> [Mar 14 12:49:02] DEBUG[12916] chan_dahdi.c: Chan 6 - ANI so far: 051,
> expected length: 10
> [Mar 14 12:49:02] DEBUG[12916] chan_dahdi.c: Chan 6 - MF Tx >> 1 [ON]
> [Mar 14 12:49:02] DEBUG[12916] chan_dahdi.c: Chan 6 - MF Rx << 1 [OFF]
> [Mar 14 12:49:02] DEBUG[12916] chan_dahdi.c: Chan 6 - MF Tx >> 1 [OFF]
> [Mar 14 12:49:02] DEBUG[12916] chan_dahdi.c: Chan 6 - MF Rx << 2 [ON]
> [Mar 14 12:49:02] DEBUG[12916] chan_dahdi.c: Chan 6 - Getting ANI digit 2
> [Mar 14 12:49:02] DEBUG[12916] chan_dahdi.c: Chan 6 - ANI so far: 0512,
> expected length: 10
> [Mar 14 12:49:02] DEBUG[12916] chan_dahdi.c: Chan 6 - MF Tx >> 1 [ON]
> [Mar 14 12:49:02] DEBUG[12916] chan_dahdi.c: Chan 6 - MF Rx << 2 [OFF]
> [Mar 14 12:49:02] DEBUG[12916] chan_dahdi.c: Chan 6 - MF Tx >> 1 [OFF]
> [Mar 14 12:49:02] DEBUG[12916] chan_dahdi.c: Chan 6 - MF Rx << F [ON]
> [Mar 14 12:49:02] DEBUG[12916] chan_dahdi.c: Chan 6 - Got end of ANI
> [Mar 14 12:49:02] DEBUG[12916] chan_dahdi.c: Chan 6 - Requesting next DNIS
> with signal 0x35.
> [Mar 14 12:49:02] DEBUG[12916] chan_dahdi.c: Chan 6 - MF Tx >> 5 [ON]
> [Mar 14 12:49:03] DEBUG[12916] chan_dahdi.c: Chan 6 - MF Rx << F [OFF]
> [Mar 14 12:49:03] DEBUG[12916] chan_dahdi.c: Chan 6 - MF Tx >> 5 [OFF]
> [Mar 14 12:49:03] DEBUG[12916] chan_dahdi.c: Chan 6 - Bits changed from
> 0x00
> to 0x08
> [Mar 14 12:49:03] DEBUG[12916] chan_dahdi.c: Chan 6 - CAS Rx << [CLEAR
> FORWARD] 0x08
> [Mar 14 12:49:03] VERBOSE[12916] chan_dahdi.c: Chan 6 - Far end
> disconnected. Reason: Normal Clearing
> [Mar 14 12:49:03] VERBOSE[12916] chan_dahdi.c: MFC/R2 call disconnected on
> channel 6
> [Mar 14 12:49:03] DEBUG[12916] chan_dahdi.c: Chan 6 - Call ended
> [Mar 14 12:49:03] DEBUG[12916] chan_dahdi.c: Chan 6 - CAS Tx >> [IDLE] 0x08
> [Mar 14 12:49:03] DEBUG[12916] chan_dahdi.c: Chan 6 - CAS Raw Tx >> 0x09
> [Mar 14 12:49:03] VERBOSE[12916] chan_dahdi.c: MFC/R2 call end on channel 6
>
>
> Mi configuracion es la siguiente.
>
> asterisk 1.6.2.13
> DAHDI Version: 2.3.0.1.
> OpenR2 version: 1.3.0, revision: (release)
>
> *Configuracion:
>
> [channels]
> ;Configuracion para Ericsson
> rxwink=300              ; Atlas seems to use long (250ms) winks
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=no
> faxdetect=incoming
> echotraining=800
> signalling=mfcr2
> mfcr2_variant=mx
> mfcr2_get_ani_first=no
> mfcr2_max_ani=10
> mfcr2_max_dnis=15
> mfcr2_category=national_subscriber
> mfcr2_mfback_timeout=-1
> mfcr2_metering_pulse_timeout=-1
> mfcr2_logging=all
> rxgain=0.0
> txgain=0.0
> callgroup=1
> pickupgroup=1
> ;Uncomment these lines if you have problems with the disconection of your
> analog lines
> ;busydetect=yes
> ;busycount=3
> immediate=no
> group=1
> callerid= asreceived
> context= Extensiones-e1-custom
> channel => 1-15,17-31
>
>
> *Mi pregunta es porque despues de recibir el 2 el asterisk envia un 6 como
> fin de recepci?n de d?gitos y no siguie esperando el DNIS completo. Hice
> pruebas con mfcr2_advanced_protocol_file modificando los parametros del
> grupo A, pero no logro recibir el resto de los digitos. Agradecere mucho
> cualquier comentario que pueda ayudarme a resolver este problema.
>
> Gracias de antemano a todos.
>
> --
> Ing. Gustavo Chavira Valle
> (Digium Certified Asterisk Professional)
> Electrosystems S de RL de CV
> Tel (656) 623-0794
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.digium.com/pipermail/asterisk-r2/attachments/20110314/5bf62942/attachment.htm
> >
>
> ------------------------------
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>
> End of asterisk-r2 Digest, Vol 31, Issue 3
> ******************************************
>

-- 
Benjamín Garzón
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20110314/eda71ad1/attachment-0001.htm>