[asterisk-r2] Register SIG R2, Line SIG e&m: Unable to setup Asterisk/libopenr2/Unicall

Oscar carriles ocarriles at eolos.la
Thu Jun 16 16:25:35 CDT 2011


Final spec from telecom argentina labo:
Register signalling mfc compelled
Line signalling e&m continuous
they call it “mfcr2 in loop compelled"

------Mensaje original------
De: Oscar Carriles
Para: asterisk-r2 at lists.digium.com
Asunto: Re: Register SIG R2, Line SIG e&m: Unable to setup Asterisk/libopenr2/Unicall
Enviado: 17 de jun de 2011 03:04

Telco give me this brief spec:

MFCR2 in loop compelled signalling

I really do not know if it is a legacy implementation
or just an unsupported analog E1

Tips appreciated

On 06/04/2011 06:09 PM, Oscar Carriles wrote:
> I am dealing with an E1 line as R2 E&M
> from Telecom Argentina.
> Have no previous experience in cases like that-
> Hola Moises, espero te encuentres bien.
> This combination seems not to be a supported feature,
> neither in asterisk/libopenr2 nor in old unicall releases.
> Any tip/Trik about the matter would be appreciated.
>
> --------zaptel.conf
> # Spans
>
> span=1,1,0,cas,hdb3
> e&m=1-15,17-31:1101
> dchan=16
> span=2,1,0,cas,hdb3
> e&m=32-46,48-62:1101
> dchan=47
>
> ------zapata.conf
> ; Placa 1
> language=es
> signalling = mfcr2
> mfcr2_variant = ar
> mfcr2_max_ani = 10
> mfcr2_max_dnis = 4
> mfcr2_category = national_subscriber
> mfcr2_call_files = yes
> mfcr2_mfback_timeout = 5000
> mfcr2_metering_pulse_timeout = 200
> mfcr2_logdir = telecom
> mfcr2_logging=all
>
> context = e1-incoming
> channel => 1-15
> channel => 17-31
>
> ----- wanpipe.conf
> #------------------------------------------------------------------------------------ 
>
> # Autogenerated by eolos (do no touch!)
> # File: wanpipeX.conf
> # Date: Thu May 26 14:44:16 ART 2011
> #------------------------------------------------------------------------------------ 
>
> [devices]
> wanpipe1 = WAN_AFT_TE1, MFCR2
> [interfaces]
> w1g1 = wanpipe1, , TDM_VOICE, pri_cpe
> [wanpipe1]
> CARD_TYPE       = AFT
> S514CPU         = A
> CommPort        = PRI
> AUTO_PCISLOT    = NO
> PCISLOT         = 10
> PCIBUS          = 1
> FE_MEDIA        = E1
> FE_LCODE        = HDB3
> FE_FRAME        = NCRC4
> FE_LINE         = 1
> TE_CLOCK        = NORMAL
> TE_REF_CLOCK    = 0
> TE_HIGHIMPEDANCE= NO
> LBO             = 120OH
> TE_SIG_MODE     = CAS
> FE_TXTRISTATE   = NO
> MTU             = 1500
> UDPPORT         = 9000
> TTL             = 255
> IGNORE_FRONT_END= NO
> TDMV_SPAN       = 1
> TDMV_DCHAN      = 16
>
> [w1g1]
> ACTIVE_CH       = ALL
> TDMV_ECHO_OFF   = NO
> TDMV_HWEC       = NO
> ~
> Results in:
> [chan_zap.so] => (Zapata Telephony w/PRI w/OpenR2)
> Jun  4 18:11:59 ERROR[4335]: chan_zap.c:7421 mkintf: Signalling 
> requested on channel 1 is MFC/R2 Signalling but line is in E & M 
> Immediate signalling
> Jun  4 18:11:59 ERROR[4335]: chan_zap.c:11272 setup_zap: Unable to 
> register channel '1-15'
> Jun  4 18:11:59 WARNING[4335]: loader.c:415 __load_resource: 
> chan_zap.so: load_module failed, returning -1
> Jun  4 18:11:59 WARNING[4335]: loader.c:555 load_modules: Loading 
> module chan_zap.so failed!
>
>


Enviado desde mi eolos mobile (http://universia.eolos.la)


More information about the asterisk-r2 mailing list