[asterisk-r2] E1 MFCR2 Problem Telecom Argentina

[Mariano Bianchi]

Hi Guys:
            I am attaching the /etc/openr2/r2proto.conf file, but it still
not working.....
Thanks for your help.

# Group A tones

mf_ga.request_next_dnis_digit=01
mf_ga_tones.request_dnis_minus_1=2
mf_ga_tones.request_dnis_minus_2=7
mf_ga_tones.request_dnis_minus_3=8
mf_ga_tones.request_all_dnis_again=X
mf_ga_tones.request_next_ani_digit=5
mf_ga_tones.request_category=5
mf_ga_tones.request_category_and_change_to_gc=X
mf_ga_tones.request_change_to_g2=3
mf_ga_tones.address_complete_charge_setup=6
mf_ga_tones.network_congestion=4 Group B tones
mf_gb_tones.accept_call_with_charge=6
mf_gb_tones.accept_call_no_charge=7
mf_gb_tones.busy_number=3
mf_gb_tones.network_congestion=4
mf_gb_tones.unallocated_number=5
mf_gb_tones.line_out_of_order=8
mf_gb_tones.special_info_tone=2
mf_gb_tones.reject_collect_call=X
mf_gb_tones.number_changed=X

# Group C tones (just Mexico use Group C signals)
mf_gc_tones.request_next_ani_digit=X
mf_gc_tones.request_change_to_g2=X
mf_gc_tones.request_next_dnis_digit_and_change_to_ga=X

# Group I tones
mf_g1_tones.no_more_dnis_available=F
mf_g1_tones.no_more_ani_available=F
mf_g1_tones.caller_ani_is_restricted=X

# Group II tones
mf_g2_tones.national_subscriber=1# Timers in milliseconds
# Use -1 to leave default, or just comment it out for that matter
timers.mf_back_cycle=1500
timers.mf_back_resume_cycle=150
timers.mf_fwd_safety=10000
timers.r2_seize=8000
timers.r2_answer=80000
timers.r2_metering_pulse=0
timers.r2_double_answer=400
timers.r2_answer_delay=150
timers.cas_persistence_check=500
timers.dtmf_start_dial=100

## misc settings ##

# time that a MF tone should persist before handling it
mf_threshold=0

mf_g2_tones.national_priority_subscriber=2
mf_g2_tones.international_subscriber=7
mf_g2_tones.international_priority_subscriber=9
mf_g2_tones.collect_call=X

★ Mariano ★
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

On Fri, Jul 22, 2011 at 10:19 AM, Moises Silva <moises.silva at gmail.com>wrote:

> On Thu, Jul 21, 2011 at 4:17 PM, Mariano Bianchi
> <marianito.bianchi at gmail.com> wrote:
> > Hi there:
> >               Apparently, the problem is that the customer is sending
> 0x31
> > to ask for the following digit, and they should send a 0xA1.
> > How do I change that?
>
> See the advanced configuration file r2proto.conf file in openr2/docs/
>
> Moises Silva
> Senior Software Engineer, Software Development Manager
> Sangoma Technologies Inc. | 100 Renfrew Drive, Suite 100, Markham ON
> L3R 9R6 Canada
> t. 1 905 474 1990 x128 | e. moy at sangoma.com
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20110725/e22a2968/attachment.htm>