[asterisk-r2] Problem Get ANI Number
Moises Silva
moises.silva at gmail.com
Sat Oct 30 21:42:39 CDT 2010
I did another change, try again plz.
Moises Silva
Senior Software Engineer
Sangoma Technologies Inc. | 100 Renfrew Drive, Suite 100, Markham ON
L3R 9R6 Canada
t. 1 905 474 1990 x128 | e. moy at sangoma.com
On Sat, Oct 30, 2010 at 7:54 PM, Roelee <fauzi_roeli at gratika.co.id> wrote:
> hi, this is my latest test call:
>
> Log:
>
> [07:19:48:583] [Thread: 3078618000] [Chan 146] - Call started at Sun Oct 31
> 07:19:48 2010 on chan 146 [openr2 version 1.3.1, revision ]
> [07:19:48:583] [Thread: 3078618000] [Chan 146] - Initialized R2 MF detector
> [07:19:48:583] [Thread: 3078618000] [Chan 146] - CAS Tx >> [SEIZE ACK] 0x0C
> [07:19:48:583] [Thread: 3078618000] [Chan 146] - CAS Raw Tx >> 0x0D
> [07:19:48:677] [Thread: 3078618000] [Chan 146] - MF Rx << 1 [ON]
> [07:19:48:677] [Thread: 3078618000] [Chan 146] - Attempting to cancel timer
> timer 0
> [07:19:48:677] [Thread: 3078618000] [Chan 146] - Cannot cancel timer 0
> [07:19:48:677] [Thread: 3078618000] [Chan 146] - Getting DNIS digit 1
> [07:19:48:677] [Thread: 3078618000] [Chan 146] - DNIS so far: 1, expected
> length: 4
> [07:19:48:677] [Thread: 3078618000] [Chan 146] - Requesting next DNIS with
> signal 0x31.
> [07:19:48:677] [Thread: 3078618000] [Chan 146] - MF Tx >> 1 [ON]
> [07:19:48:677] [Thread: 3078618000] [Chan 146] - scheduled timer id 2
> (mf_back_cycle)
> [07:19:48:757] [Thread: 3078618000] [Chan 146] - MF Rx << 1 [OFF]
> [07:19:48:757] [Thread: 3078618000] [Chan 146] - MF Tx >> 1 [OFF]
> [07:19:48:817] [Thread: 3078618000] [Chan 146] - MF Rx << 0 [ON]
> [07:19:48:817] [Thread: 3078618000] [Chan 146] - Attempting to cancel timer
> timer 2
> [07:19:48:817] [Thread: 3078618000] [Chan 146] - timer id 2 found,
> cancelling it now
> [07:19:48:817] [Thread: 3078618000] [Chan 146] - Getting DNIS digit 0
> [07:19:48:817] [Thread: 3078618000] [Chan 146] - DNIS so far: 10, expected
> length: 4
> [07:19:48:817] [Thread: 3078618000] [Chan 146] - Requesting next DNIS with
> signal 0x31.
> [07:19:48:817] [Thread: 3078618000] [Chan 146] - MF Tx >> 1 [ON]
> [07:19:48:817] [Thread: 3078618000] [Chan 146] - scheduled timer id 3
> (mf_back_cycle)
> [07:19:48:877] [Thread: 3078618000] [Chan 146] - MF Rx << 0 [OFF]
> [07:19:48:877] [Thread: 3078618000] [Chan 146] - MF Tx >> 1 [OFF]
> [07:19:48:937] [Thread: 3078618000] [Chan 146] - MF Rx << 9 [ON]
> [07:19:48:937] [Thread: 3078618000] [Chan 146] - Attempting to cancel timer
> timer 3
> [07:19:48:937] [Thread: 3078618000] [Chan 146] - timer id 3 found,
> cancelling it now
> [07:19:48:937] [Thread: 3078618000] [Chan 146] - Getting DNIS digit 9
> [07:19:48:937] [Thread: 3078618000] [Chan 146] - DNIS so far: 109, expected
> length: 4
> [07:19:48:937] [Thread: 3078618000] [Chan 146] - User requested us to stop
> getting DNIS!
> [07:19:48:937] [Thread: 3078618000] [Chan 146] - MF Tx >> 6 [ON]
> [07:19:48:937] [Thread: 3078618000] [Chan 146] - scheduled timer id 4
> (mf_back_cycle)
> [07:19:49:017] [Thread: 3078618000] [Chan 146] - MF Rx << 9 [OFF]
> [07:19:49:017] [Thread: 3078618000] [Chan 146] - MF Tx >> 6 [OFF]
> [07:19:49:097] [Thread: 3078618000] [Chan 146] - MF Rx << 2 [ON]
> [07:19:49:097] [Thread: 3078618000] [Chan 146] - Attempting to cancel timer
> timer 4
> [07:19:49:097] [Thread: 3078618000] [Chan 146] - timer id 4 found,
> cancelling it now
> [07:19:49:097] [Thread: 3078618000] [Chan 146] - MF Tx >> 5 [ON]
> [07:19:49:097] [Thread: 3078618000] [Chan 146] - scheduled timer id 5
> (mf_back_cycle)
> [07:19:49:177] [Thread: 3078618000] [Chan 146] - MF Rx << 2 [OFF]
> [07:19:49:177] [Thread: 3078618000] [Chan 146] - MF Tx >> 5 [OFF]
> [07:19:49:897] [Thread: 3078618000] [Chan 146] - Attempting to cancel timer
> timer 5
> [07:19:49:897] [Thread: 3078618000] [Chan 146] - timer id 5 found,
> cancelling it now
> [07:19:49:897] [Thread: 3078618000] [Chan 146] - calling timer 5
> (mf_back_cycle) callback
> [07:19:48:937] [Thread: 3078618000] [Chan 146] - DNIS so far: 109, expected
> length: 4
> [07:19:48:937] [Thread: 3078618000] [Chan 146] - User requested us to stop
> getting DNIS!
> [07:19:48:937] [Thread: 3078618000] [Chan 146] - MF Tx >> 6 [ON]
> [07:19:48:937] [Thread: 3078618000] [Chan 146] - scheduled timer id 4
> (mf_back_cycle)
> [07:19:49:017] [Thread: 3078618000] [Chan 146] - MF Rx << 9 [OFF]
> [07:19:49:017] [Thread: 3078618000] [Chan 146] - MF Tx >> 6 [OFF]
> [07:19:49:097] [Thread: 3078618000] [Chan 146] - MF Rx << 2 [ON]
> [07:19:49:097] [Thread: 3078618000] [Chan 146] - Attempting to cancel timer
> timer 4
> [07:19:49:097] [Thread: 3078618000] [Chan 146] - timer id 4 found,
> cancelling it now
> [07:19:49:097] [Thread: 3078618000] [Chan 146] - MF Tx >> 5 [ON]
> [07:19:49:097] [Thread: 3078618000] [Chan 146] - scheduled timer id 5
> (mf_back_cycle)
> [07:19:49:177] [Thread: 3078618000] [Chan 146] - MF Rx << 2 [OFF]
> [07:19:49:177] [Thread: 3078618000] [Chan 146] - MF Tx >> 5 [OFF]
> [07:19:49:897] [Thread: 3078618000] [Chan 146] - Attempting to cancel timer
> timer 5
> [07:19:49:897] [Thread: 3078618000] [Chan 146] - timer id 5 found,
> cancelling it now
> [07:19:49:897] [Thread: 3078618000] [Chan 146] - calling timer 5
> (mf_back_cycle) callback
> [07:19:49:897] [Thread: 3078618000] [Chan 146] - MF back cycle timed out!
> [07:19:49:897] [Thread: 3078618000] [Chan 146] - Protocol error. Reason =
> Multi Frequency Cycle Timeout, R2 State = Seize ACK Transmitted, MF s
> tate = ANI Request Transmitted, MF Group = Backward Group A, CAS = 0x00
> DNIS = 109, ANI = , MF = 0x20
> [07:19:49:897] [Thread: 3078618000] [Chan 146] - Attempting to cancel timer
> timer 0
> [07:19:49:897] [Thread: 3078618000] [Chan 146] - Cannot cancel timer 0
>
>
> CLI :
>
> 146 ID 20 4 No Yes IDLE IDLE
> 147 ID 20 4 No Yes IDLE IDLE
> 148 ID 20 4 No Yes IDLE IDLE
> 149 ID 20 4 No Yes IDLE IDLE
> 150 ID 20 4 No Yes IDLE IDLE
> 151 ID 20 4 No Yes IDLE IDLE
> 152 ID 20 4 No Yes IDLE IDLE
> 153 ID 20 4 No Yes IDLE IDLE
> 154 ID 20 4 No Yes IDLE IDLE
> 155 ID 20 4 No Yes IDLE IDLE
> New MFC/R2 call detected on chan 146.
> [Oct 31 07:19:49] WARNING[9965]: chan_dahdi.c:1925 dahdi_r2_write_log: Chan
> 146 - MF back cycle timed out!
> [Oct 31 07:19:49] ERROR[9965]: chan_dahdi.c:1928 dahdi_r2_write_log: Chan
> 146 - Protocol error. Reason = Multi Frequency Cycle Timeout, R2 State =
> Seize ACK Transmitted, MF state = ANI Request Transmitted, MF Group =
> Backward Group A, CAS = 0x00
> DNIS = 109, ANI = , MF = 0x20
> [Oct 31 07:19:49] ERROR[9965]: chan_dahdi.c:1713 dahdi_r2_on_protocol_error:
> MFC/R2 protocol error on chan 146: Multi Frequency Cycle Timeout
> [Oct 31 07:19:54] NOTICE[9965]: chan_dahdi.c:1959 dahdi_r2_on_line_idle: Far
> end unblocked on chan 146
>
> chan_dahdi.conf :
>
> [channels]
> ...
> ...
> ...
> mfcr2_variant=id
> mfcr2_get_ani_first=no
> mfcr2_max_ani=20
> mfcr2_max_dnis=4
> mfcr2_category=national_subscriber
> mfcr2_logdir=span1
> mfcr2_logging=all
> mfcr2_call_files=yes
> mfcr2_skip_category=no
> mfcr2_mfback_timeout=800
> mfcr2_allow_collect_calls=no
> mfcr2_double_answer=yes
> mfcr2_metering_pulse_timeout=-1
> mfcr2_immediate_accept=yes
> ...
> ..
>
> thanks.
>
> regards,
>
> roelee
>
>
>
> On Sat, 2010-10-30 at 12:54 -0400, Moises Silva wrote:
>
> On Sat, Oct 30, 2010 at 9:01 AM, Roelee <fauzi_roeli at gratika.co.id> wrote:
>> Hi, i has tried to compile openr2 from your svn and change it to 'id'
>> variant, but I still got problem.
>> this is output from CLI :
>> 143 ID 20 4 No Yes IDLE IDLE
>> 144 ID 20 4 No Yes IDLE IDLE
>> 145 ID 20 4 No Yes IDLE IDLE
>> 146 ID 20 4 No Yes IDLE IDLE
>> 147 ID 20 4 No Yes IDLE IDLE
>> 148 ID 20 4 No Yes IDLE IDLE
>> 149 ID 20 4 No Yes IDLE IDLE
>> 150 ID 20 4 No Yes IDLE IDLE
>> 151 ID 20 4 No Yes IDLE IDLE
>> 152 ID 20 4 No Yes IDLE IDLE
>> 153 ID 20 4 No Yes IDLE IDLE
>> 154 ID 20 4 No Yes IDLE IDLE
>> 155 ID 20 4 No Yes IDLE IDLE
>> New MFC/R2 call detected on chan 143.
>> [Oct 30 20:30:28] WARNING[9728]: chan_dahdi.c:1925 dahdi_r2_write_log:
>> Chan
>> 143 - MF back cycle timed out!
>> [Oct 30 20:30:28] ERROR[9728]: chan_dahdi.c:1928 dahdi_r2_write_log: Chan
>> 143 - Protocol error. Reason = Multi Frequency Cycle Timeout, R2 State =
>> Seize ACK Transmitted, MF state = ANI Request Transmitted, MF Group =
>> Backward Group A, CAS = 0x00
>> DNIS = 109, ANI = , MF = 0x20
>> [Oct 30 20:30:28] ERROR[9728]: chan_dahdi.c:1713
>> dahdi_r2_on_protocol_error:
>> MFC/R2 protocol error on chan 143: Multi Frequency Cycle Timeout
>> [Oct 30 20:30:44] NOTICE[9728]: chan_dahdi.c:1959 dahdi_r2_on_line_idle:
>> Far
>> end unblocked on chan 143
>> vrs01*CLI>
>>
>
> I need the full protocol log, not just the errors. see
> mfcr2_call_files=yes comments for help.
>
> Moises Silva
> Senior Software Engineer
> Sangoma Technologies Inc. | 100 Renfrew Drive, Suite 100, Markham ON
> L3R 9R6 Canada
> t. 1 905 474 1990 x128 | e. moy at sangoma.com
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-r2
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-r2
>
More information about the asterisk-r2
mailing list