[asterisk-r2] Problem Get ANI Number

[Moises Silva]

On Sat, Oct 30, 2010 at 9:01 AM, Roelee <fauzi_roeli at gratika.co.id> wrote:
> Hi, i has tried to compile openr2 from your svn  and change it to 'id'
> variant, but I still got problem.
> this is output from CLI :
> 143 ID      20      4        No        Yes              IDLE     IDLE
> 144 ID      20      4        No        Yes              IDLE     IDLE
> 145 ID      20      4        No        Yes              IDLE     IDLE
> 146 ID      20      4        No        Yes              IDLE     IDLE
> 147 ID      20      4        No        Yes              IDLE     IDLE
> 148 ID      20      4        No        Yes              IDLE     IDLE
> 149 ID      20      4        No        Yes              IDLE     IDLE
> 150 ID      20      4        No        Yes              IDLE     IDLE
> 151 ID      20      4        No        Yes              IDLE     IDLE
> 152 ID      20      4        No        Yes              IDLE     IDLE
> 153 ID      20      4        No        Yes              IDLE     IDLE
> 154 ID      20      4        No        Yes              IDLE     IDLE
> 155 ID      20      4        No        Yes              IDLE     IDLE
> New MFC/R2 call detected on chan 143.
> [Oct 30 20:30:28] WARNING[9728]: chan_dahdi.c:1925 dahdi_r2_write_log: Chan
> 143 - MF back cycle timed out!
> [Oct 30 20:30:28] ERROR[9728]: chan_dahdi.c:1928 dahdi_r2_write_log: Chan
> 143 - Protocol error. Reason = Multi Frequency Cycle Timeout, R2 State =
> Seize ACK Transmitted, MF state = ANI Request Transmitted, MF Group =
> Backward Group A, CAS = 0x00
> DNIS = 109, ANI = , MF = 0x20
> [Oct 30 20:30:28] ERROR[9728]: chan_dahdi.c:1713 dahdi_r2_on_protocol_error:
> MFC/R2 protocol error on chan 143: Multi Frequency Cycle Timeout
> [Oct 30 20:30:44] NOTICE[9728]: chan_dahdi.c:1959 dahdi_r2_on_line_idle: Far
> end unblocked on chan 143
> vrs01*CLI>
>

I need the full protocol log, not just the errors. see
mfcr2_call_files=yes comments for help.

Moises Silva
Senior Software Engineer
Sangoma Technologies Inc. | 100 Renfrew Drive, Suite 100, Markham ON
L3R 9R6 Canada
t. 1 905 474 1990 x128 | e. moy at sangoma.com