[asterisk-r2] Problem Get ANI Number

Thu Oct 28 00:00:28 CDT 2010

sory, i don't understand what do you mean about the other end. it's about
from telco switch or my other mfcr2 configuration in chan_dahdi.conf ?

Original Message:
-----------------
From: Moises Silva moises.silva at gmail.com
Date: Thu, 28 Oct 2010 00:35:24 -0400
To: fauzi_roeli at gratika.co.id, asterisk-r2 at lists.digium.com
Subject: Re: [asterisk-r2] Problem Get ANI Number

On Thu, Oct 28, 2010 at 12:28 AM, fauzi_roeli at gratika.co.id
<fauzi_roeli at gratika.co.id> wrote:
> hi..
>
> i have change mfcr2_skip_category to no, but it make error in CLI like
this:
>
> New MFC/R2 call detected on chan 139.
> [Oct 28 11:47:41] WARNING[11700]: chan_dahdi.c:1925 dahdi_r2_write_log:
> Chan 139 - MF back cycle timed out!
> [Oct 28 11:47:41] ERROR[11700]: chan_dahdi.c:1928 dahdi_r2_write_log: Chan
> 139 - Protocol error. Reason = Multi Frequency Cycle Timeout, R2 State =
> Seize ACK Transmitted, MF state = Category Request Transmitted, MF Group =
> Backward Group A, CAS = 0x00
> DNIS = 109, ANI = , MF = 0x20
> [Oct 28 11:47:41] ERROR[11700]: chan_dahdi.c:1713
> dahdi_r2_on_protocol_error: MFC/R2 protocol error on chan 139: Multi
> Frequency Cycle Timeout
> [Oct 28 11:47:47] NOTICE[11700]: chan_dahdi.c:1959 dahdi_r2_on_line_idle:
> Far end unblocked on chan 139
> vrs01*CLI>

That most likely means that the other end is not configured to send
caller id (ANI).

Moises Silva
Senior Software Engineer
Sangoma Technologies Inc. | 100 Renfrew Drive, Suite 100, Markham ON
L3R 9R6 Canada
t. 1 905 474 1990 x128 | e. moy at sangoma.com

--------------------------------------------------------------------
mail2web.com – What can On Demand Business Solutions do for you?
http://link.mail2web.com/Business/SharePoint