[asterisk-r2] asterisk blocking channels
Marcelo nunes dos santos
marcelo7889 at gmail.com
Thu May 13 20:12:00 CDT 2010
Thank you moises, I was installed all system again, end using openR2 with
yours help in #asterisk-r2 its works.
thank you.
Marcelo Nunes Dos santos
--------------------------------------------------------------------------
TI Savarsul - nunes at savarsul.com.br
Blog: makelinux.com.br
Email/MSN: marcelo7889 at gmail.com
twitter: www.twitter.com/marcelonunes
On Wed, May 12, 2010 at 11:14 PM, Moises Silva <moises.silva at gmail.com>wrote:
> Sorry I don't believe you. Pastebin the output of uc show channels and a
> link to a screenshot of dahdi_tool when seeing the ABCD bits.
>
> Moises Silva
> Senior Software Engineer
> Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R
> 9T3 Canada
> t. 1 905 474 1990 x 128 | e. moy at sangoma.com
>
>
> On Wed, May 12, 2010 at 8:22 PM, Marcelo nunes dos santos <
> marcelo7889 at gmail.com> wrote:
>
>> UC show channels return to me, all channels state with Idle nothing with
>> blocked, but if I dial it return this message.
>>
>>
>> Marcelo Nunes Dos santos
>> --------------------------------------------------------------------------
>> TI Savarsul - nunes at savarsul.com.br
>> Blog: makelinux.com.br
>> Email/MSN: marcelo7889 at gmail.com
>> twitter: www.twitter.com/marcelonunes
>>
>>
>>
>>
>> On Wed, May 12, 2010 at 6:08 PM, Moises Silva <moises.silva at gmail.com>wrote:
>>
>>> Your error message simply says that the other end is blocked.
>>>
>>> "uc show channels" IIRC will tell you which is the current status for
>>> your channels. Most likely the telco is blocking the channels.
>>>
>>>
>>> Moises Silva
>>> Senior Software Engineer
>>> Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R
>>> 9T3 Canada
>>> t. 1 905 474 1990 x 128 | e. moy at sangoma.com
>>>
>>>
>>> On Wed, May 12, 2010 at 5:01 PM, Marcelo nunes dos santos <
>>> marcelo7889 at gmail.com> wrote:
>>>
>>>> Because this server was working with this configuration, and my idea is
>>>> not configure its again.
>>>>
>>>> my central is very hard to configure, because its very old.
>>>>
>>>> But a I'm do test with openR2.
>>>>
>>>> thank you.
>>>>
>>>>
>>>>
>>>>
>>>> Marcelo Nunes Dos santos
>>>>
>>>> --------------------------------------------------------------------------
>>>> TI Savarsul - nunes at savarsul.com.br
>>>> Blog: makelinux.com.br
>>>> Email/MSN: marcelo7889 at gmail.com
>>>> twitter: www.twitter.com/marcelonunes
>>>>
>>>>
>>>>
>>>>
>>>> On Wed, May 12, 2010 at 5:55 PM, Moises Silva <moises.silva at gmail.com>wrote:
>>>>
>>>>> I guess can be used for any R2, but is hard to help someone which is
>>>>> using a piece of software that is outdated, I don't have the time to
>>>>> maintain it anymore and does not make sense to maintain two R2 libraries,
>>>>> not to mention to maintain a whole channel driver just for R2.
>>>>>
>>>>> Why aren't you using openr2?
>>>>>
>>>>> Moises Silva
>>>>> Senior Software Engineer
>>>>> Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON
>>>>> L3R 9T3 Canada
>>>>> t. 1 905 474 1990 x 128 | e. moy at sangoma.com
>>>>>
>>>>>
>>>>>
>>>>> On Wed, May 12, 2010 at 4:51 PM, Marcelo nunes dos santos <
>>>>> marcelo7889 at gmail.com> wrote:
>>>>>
>>>>>> Sorry, i think that list was for any R2.
>>>>>>
>>>>>>
>>>>>> Marcelo Nunes Dos santos
>>>>>>
>>>>>> --------------------------------------------------------------------------
>>>>>> TI Savarsul - nunes at savarsul.com.br
>>>>>> Blog: makelinux.com.br
>>>>>> Email/MSN: marcelo7889 at gmail.com
>>>>>> twitter: www.twitter.com/marcelonunes
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Wed, May 12, 2010 at 5:47 PM, Juan Carlos Huerta <
>>>>>> juancarloshuerta at gmail.com> wrote:
>>>>>>
>>>>>>> Marcelo,
>>>>>>>
>>>>>>> This list is only for OpenR2 support, no for Unicall, please use
>>>>>>> openr2! is better!
>>>>>>>
>>>>>>> Juan Carlos
>>>>>>> ~ Lo que no te mata te fortalece ~
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Wed, May 12, 2010 at 11:48 AM, Marcelo nunes dos santos
>>>>>>> <marcelo7889 at gmail.com> wrote:
>>>>>>> > Hello,
>>>>>>> >
>>>>>>> > i'm using asterisk 1.4.9 in fedora 7, i was compiled its with this
>>>>>>> package:
>>>>>>> >
>>>>>>> > libpri-1.4.2
>>>>>>> > asterisk-1.4.9
>>>>>>> > spandsp-0.0.4
>>>>>>> > unicall-0.0.5pre1
>>>>>>> > libmfcr2-0.0.3
>>>>>>> > libsupertone-0.0.2
>>>>>>> > libunicall-0.0.3
>>>>>>> > zaptel-1.4.4
>>>>>>> >
>>>>>>> > i'm using a E1 pci card with R2 but they not work, when I start the
>>>>>>> asterisk
>>>>>>> > its generate this log:
>>>>>>> >
>>>>>>> >
>>>>>>> > [May 12 08:53:24] WARNING[30814] channel.c: No channel type
>>>>>>> registered for
>>>>>>> > 'Unicall'
>>>>>>> > [May 12 08:53:24] WARNING[30814] app_dial.c: Unable to create
>>>>>>> channel of
>>>>>>> > type 'Unicall' (cause 66 - Channel not implemented)
>>>>>>> > [May 12 08:54:47] NOTICE[2613] cdr.c: CDR simple logging enabled.
>>>>>>> > [May 12 08:54:47] NOTICE[2613] loader.c: 146 modules will be
>>>>>>> loaded.
>>>>>>> > [May 12 08:54:49] WARNING[2613] res_smdi.c: No SMDI interfaces are
>>>>>>> available
>>>>>>> > to listen on, not starting SDMI listener.
>>>>>>> > [May 12 08:54:50] WARNING[2613] chan_sip.c: insecure=very at line
>>>>>>> 37 is
>>>>>>> > deprecated; use insecure=port,invite instead
>>>>>>> > [May 12 08:54:50] WARNING[2613] chan_zap.c: Unable to specify
>>>>>>> channel 1:
>>>>>>> > Device or resource busy
>>>>>>> > [May 12 08:54:50] ERROR[2613] chan_zap.c: Unable to open channel 1:
>>>>>>> Device
>>>>>>> > or resource busy
>>>>>>> > here = 0, tmp->channel = 1, channel = 1
>>>>>>> > [May 12 08:54:50] ERROR[2613] chan_zap.c: Unable to register
>>>>>>> channel
>>>>>>> > '1-15,17-31'
>>>>>>> > [May 12 08:54:50] NOTICE[2613] pbx_ael.c: Starting AEL load
>>>>>>> process.
>>>>>>> > [May 12 08:54:50] NOTICE[2613] pbx_ael.c: AEL load process:
>>>>>>> calculated
>>>>>>> > config file name '/etc/asterisk/extensions.ael'.
>>>>>>> > [May 12 08:54:50] WARNING[2613] ael.y: ==== File:
>>>>>>> > /etc/asterisk/extensions.ael, Line 112, Cols: 34-34: Warning! The
>>>>>>> empty
>>>>>>> > context ael-dundi-e164-canonical will be IGNORED!
>>>>>>> > [May 12 08:54:50] WARNING[2613] ael.y: ==== File:
>>>>>>> > /etc/asterisk/extensions.ael, Line 120, Cols: 34-34: Warning! The
>>>>>>> empty
>>>>>>> > context ael-dundi-e164-customers will be IGNORED!
>>>>>>> > [May 12 08:54:50] WARNING[2613] ael.y: ==== File:
>>>>>>> > /etc/asterisk/extensions.ael, Line 128, Cols: 33-33: Warning! The
>>>>>>> empty
>>>>>>> > context ael-dundi-e164-via-pstn will be IGNORED!
>>>>>>> > [May 12 08:54:50] NOTICE[2613] pbx_ael.c: AEL load process: parsed
>>>>>>> config
>>>>>>> > file name '/etc/asterisk/extensions.ael'
>>>>>>> > .
>>>>>>> > [May 12 08:54:50] WARNING[2613] pbx_ael.c: Warning: file
>>>>>>> > /etc/asterisk/extensions.ael, line 141-145: The included context
>>>>>>> > 'ael-dundi-e164-canonical' cannot be found.
>>>>>>> > [May 12 08:54:50] WARNING[2613] pbx_ael.c: Warning: file
>>>>>>> > /etc/asterisk/extensions.ael, line 141-145: The included context
>>>>>>> > 'ael-dundi-e164-customers' cannot be found.
>>>>>>> > [May 12 08:54:50] WARNING[2613] pbx_ael.c: Warning: file
>>>>>>> > /etc/asterisk/extensions.ael, line 141-145: The included context
>>>>>>> > 'ael-dundi-e164-via-pstn' cannot be found.
>>>>>>> > [May 12 08:54:50] WARNING[2613] pbx_ael.c: Warning: file
>>>>>>> > /etc/asterisk/extensions.ael, line 276-283: The included context
>>>>>>> > 'ael-parkedcalls' cannot be found.
>>>>>>> > [May 12 08:54:50] NOTICE[2613] pbx_ael.c: AEL load process: checked
>>>>>>> config
>>>>>>> > file name '/etc/asterisk/extensions.ael'.
>>>>>>> > [May 12 08:54:50] NOTICE[2613] pbx_ael.c: AEL load process:
>>>>>>> compiled config
>>>>>>> > file name '/etc/asterisk/extensions.ael'.
>>>>>>> > [May 12 08:54:50] NOTICE[2613] pbx_ael.c: AEL load process: merged
>>>>>>> config
>>>>>>> > file name '/etc/asterisk/extensions.ael'.
>>>>>>> > [May 12 08:54:50] WARNING[2613] pbx.c: Context 'ael-local' tries
>>>>>>> includes
>>>>>>> > nonexistent context 'ael-parkedcalls'
>>>>>>> >
>>>>>>> > my file unicall.conf is this:
>>>>>>> >
>>>>>>> > [channels]
>>>>>>> >
>>>>>>> > context=e1-inline
>>>>>>> > usecallerid=yes
>>>>>>> > hidecallerid=no
>>>>>>> > threewaycalling=yes
>>>>>>> > transfer=yes
>>>>>>> > cancallforward=yes
>>>>>>> > callreturn=yes
>>>>>>> > echocancel=yes
>>>>>>> > echocancelwhenbridged=yes
>>>>>>> > rxgain=0.0
>>>>>>> > txgain=0.0
>>>>>>> > relaxdtmf=yes
>>>>>>> > callgroup=1
>>>>>>> > pickupgroup=1
>>>>>>> > immediate=no
>>>>>>> > callerid=asreceived
>>>>>>> > musiconhold=default
>>>>>>> > protocolclass=mfcr2
>>>>>>> > protocolvariant=br,20,20,20
>>>>>>> > protocolend=cpe
>>>>>>> > group=1
>>>>>>> > channel => 1-15
>>>>>>> > channel => 17-31
>>>>>>> >
>>>>>>> > and when i do any dial by asterisk return this:
>>>>>>> >
>>>>>>> > The 'dial' command is deprecated and will be removed in a future
>>>>>>> release.
>>>>>>> > Please use 'console dial' instead.
>>>>>>> > == Console is full duplex
>>>>>>> > -- Executing [208 at ext-local:1] Dial("OSS/dsp",
>>>>>>> "Unicall/g1/32719595") in
>>>>>>> > new stack
>>>>>>> > [May 12 08:58:43] WARNING[2689]: chan_unicall.c:1034 unicall_call:
>>>>>>> Make call
>>>>>>> > failed - Blocked
>>>>>>> > -- Couldn't call g1/32719595
>>>>>>> > -- Hungup 'UniCall/1-1'
>>>>>>> > == Everyone is busy/congested at this time (0:0/0/0)
>>>>>>> > == Auto fallthrough, channel 'OSS/dsp' status is 'CHANUNAVAIL'
>>>>>>> >
>>>>>>> >
>>>>>>> >
>>>>>>> > can somebody help me?
>>>>>>> >
>>>>>>> > Sorry for my english.
>>>>>>> >
>>>>>>> > Marcelo Nunes Dos santos
>>>>>>> >
>>>>>>> --------------------------------------------------------------------------
>>>>>>> > TI Savarsul - nunes at savarsul.com.br
>>>>>>> > Blog: makelinux.com.br
>>>>>>> > Email/MSN: marcelo7889 at gmail.com
>>>>>>> > twitter: www.twitter.com/marcelonunes
>>>>>>> >
>>>>>>> >
>>>>>>> >
>>>>>>> > --
>>>>>>> >
>>>>>>> _____________________________________________________________________
>>>>>>> > -- Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>>>> >
>>>>>>> > asterisk-r2 mailing list
>>>>>>> > To UNSUBSCRIBE or update options visit:
>>>>>>> > http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>>>> >
>>>>>>>
>>>>>>> --
>>>>>>> _____________________________________________________________________
>>>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>>>>
>>>>>>> asterisk-r2 mailing list
>>>>>>> To UNSUBSCRIBE or update options visit:
>>>>>>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> _____________________________________________________________________
>>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>>>
>>>>>> asterisk-r2 mailing list
>>>>>> To UNSUBSCRIBE or update options visit:
>>>>>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> _____________________________________________________________________
>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>>
>>>>> asterisk-r2 mailing list
>>>>> To UNSUBSCRIBE or update options visit:
>>>>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>>
>>>>
>>>>
>>>> --
>>>> _____________________________________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>
>>>> asterisk-r2 mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>
>>>
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-r2 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-r2
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20100513/86e9e3cb/attachment-0001.htm
More information about the asterisk-r2
mailing list