[asterisk-r2] asterisk blocking channels

Wed May 12 19:22:42 CDT 2010

UC show channels return to me, all channels state with Idle nothing with
blocked, but if I dial it return this message.

Marcelo Nunes Dos santos
--------------------------------------------------------------------------
TI Savarsul - nunes at savarsul.com.br
Blog: makelinux.com.br
Email/MSN: marcelo7889 at gmail.com
twitter: www.twitter.com/marcelonunes

On Wed, May 12, 2010 at 6:08 PM, Moises Silva <moises.silva at gmail.com>wrote:

> Your error message simply says that the other end is blocked.
>
> "uc show channels" IIRC will tell you which is the current status for your
> channels. Most likely the telco is blocking the channels.
>
>
> Moises Silva
> Senior Software Engineer
> Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R
> 9T3 Canada
> t. 1 905 474 1990 x 128 | e. moy at sangoma.com
>
>
> On Wed, May 12, 2010 at 5:01 PM, Marcelo nunes dos santos <
> marcelo7889 at gmail.com> wrote:
>
>> Because this server was working with this configuration, and my  idea is
>> not configure its again.
>>
>> my central is very hard to configure, because its very old.
>>
>> But a I'm do test with openR2.
>>
>> thank you.
>>
>>
>>
>>
>> Marcelo Nunes Dos santos
>> --------------------------------------------------------------------------
>> TI Savarsul - nunes at savarsul.com.br
>> Blog: makelinux.com.br
>> Email/MSN: marcelo7889 at gmail.com
>> twitter: www.twitter.com/marcelonunes
>>
>>
>>
>>
>> On Wed, May 12, 2010 at 5:55 PM, Moises Silva <moises.silva at gmail.com>wrote:
>>
>>> I guess can be used for any R2, but is hard to help someone which is
>>> using a piece of software that is outdated, I don't have the time to
>>> maintain it anymore and does not make sense to maintain two R2 libraries,
>>> not to mention to maintain a whole channel driver just for R2.
>>>
>>> Why aren't you using openr2?
>>>
>>> Moises Silva
>>> Senior Software Engineer
>>> Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R
>>> 9T3 Canada
>>> t. 1 905 474 1990 x 128 | e. moy at sangoma.com
>>>
>>>
>>>
>>> On Wed, May 12, 2010 at 4:51 PM, Marcelo nunes dos santos <
>>> marcelo7889 at gmail.com> wrote:
>>>
>>>> Sorry, i think that list was for any R2.
>>>>
>>>>
>>>> Marcelo Nunes Dos santos
>>>>
>>>> --------------------------------------------------------------------------
>>>> TI Savarsul - nunes at savarsul.com.br
>>>> Blog: makelinux.com.br
>>>> Email/MSN: marcelo7889 at gmail.com
>>>> twitter: www.twitter.com/marcelonunes
>>>>
>>>>
>>>>
>>>>
>>>> On Wed, May 12, 2010 at 5:47 PM, Juan Carlos Huerta <
>>>> juancarloshuerta at gmail.com> wrote:
>>>>
>>>>> Marcelo,
>>>>>
>>>>> This list is only for OpenR2 support, no for Unicall, please use
>>>>> openr2! is better!
>>>>>
>>>>> Juan Carlos
>>>>> ~ Lo que no te mata te fortalece ~
>>>>>
>>>>>
>>>>>
>>>>> On Wed, May 12, 2010 at 11:48 AM, Marcelo nunes dos santos
>>>>> <marcelo7889 at gmail.com> wrote:
>>>>> > Hello,
>>>>> >
>>>>> >  i'm using asterisk 1.4.9 in fedora 7, i was compiled its with this
>>>>> package:
>>>>> >
>>>>> > libpri-1.4.2
>>>>> > asterisk-1.4.9
>>>>> > spandsp-0.0.4
>>>>> > unicall-0.0.5pre1
>>>>> >    libmfcr2-0.0.3
>>>>> >    libsupertone-0.0.2
>>>>> >    libunicall-0.0.3
>>>>> > zaptel-1.4.4
>>>>> >
>>>>> > i'm using a E1 pci card with R2 but they not work, when I start the
>>>>> asterisk
>>>>> > its generate this log:
>>>>> >
>>>>> >
>>>>> > [May 12 08:53:24] WARNING[30814] channel.c: No channel type
>>>>> registered for
>>>>> > 'Unicall'
>>>>> > [May 12 08:53:24] WARNING[30814] app_dial.c: Unable to create channel
>>>>> of
>>>>> > type 'Unicall' (cause 66 - Channel not implemented)
>>>>> > [May 12 08:54:47] NOTICE[2613] cdr.c: CDR simple logging enabled.
>>>>> > [May 12 08:54:47] NOTICE[2613] loader.c: 146 modules will be loaded.
>>>>> > [May 12 08:54:49] WARNING[2613] res_smdi.c: No SMDI interfaces are
>>>>> available
>>>>> > to listen on, not starting SDMI listener.
>>>>> > [May 12 08:54:50] WARNING[2613] chan_sip.c: insecure=very at line 37
>>>>> is
>>>>> > deprecated; use insecure=port,invite instead
>>>>> > [May 12 08:54:50] WARNING[2613] chan_zap.c: Unable to specify channel
>>>>> 1:
>>>>> > Device or resource busy
>>>>> > [May 12 08:54:50] ERROR[2613] chan_zap.c: Unable to open channel 1:
>>>>> Device
>>>>> > or resource busy
>>>>> > here = 0, tmp->channel = 1, channel = 1
>>>>> > [May 12 08:54:50] ERROR[2613] chan_zap.c: Unable to register channel
>>>>> > '1-15,17-31'
>>>>> > [May 12 08:54:50] NOTICE[2613] pbx_ael.c: Starting AEL load process.
>>>>> > [May 12 08:54:50] NOTICE[2613] pbx_ael.c: AEL load process:
>>>>> calculated
>>>>> > config file name '/etc/asterisk/extensions.ael'.
>>>>> > [May 12 08:54:50] WARNING[2613] ael.y: ==== File:
>>>>> > /etc/asterisk/extensions.ael, Line 112, Cols: 34-34: Warning! The
>>>>> empty
>>>>> > context ael-dundi-e164-canonical will be IGNORED!
>>>>> > [May 12 08:54:50] WARNING[2613] ael.y: ==== File:
>>>>> > /etc/asterisk/extensions.ael, Line 120, Cols: 34-34: Warning! The
>>>>> empty
>>>>> > context ael-dundi-e164-customers will be IGNORED!
>>>>> > [May 12 08:54:50] WARNING[2613] ael.y: ==== File:
>>>>> > /etc/asterisk/extensions.ael, Line 128, Cols: 33-33: Warning! The
>>>>> empty
>>>>> > context ael-dundi-e164-via-pstn will be IGNORED!
>>>>> > [May 12 08:54:50] NOTICE[2613] pbx_ael.c: AEL load process: parsed
>>>>> config
>>>>> > file name '/etc/asterisk/extensions.ael'
>>>>> > .
>>>>> > [May 12 08:54:50] WARNING[2613] pbx_ael.c: Warning: file
>>>>> > /etc/asterisk/extensions.ael, line 141-145: The included context
>>>>> > 'ael-dundi-e164-canonical' cannot be found.
>>>>> > [May 12 08:54:50] WARNING[2613] pbx_ael.c: Warning: file
>>>>> > /etc/asterisk/extensions.ael, line 141-145: The included context
>>>>> > 'ael-dundi-e164-customers' cannot be found.
>>>>> > [May 12 08:54:50] WARNING[2613] pbx_ael.c: Warning: file
>>>>> > /etc/asterisk/extensions.ael, line 141-145: The included context
>>>>> > 'ael-dundi-e164-via-pstn' cannot be found.
>>>>> > [May 12 08:54:50] WARNING[2613] pbx_ael.c: Warning: file
>>>>> > /etc/asterisk/extensions.ael, line 276-283: The included context
>>>>> > 'ael-parkedcalls' cannot be found.
>>>>> > [May 12 08:54:50] NOTICE[2613] pbx_ael.c: AEL load process: checked
>>>>> config
>>>>> > file name '/etc/asterisk/extensions.ael'.
>>>>> > [May 12 08:54:50] NOTICE[2613] pbx_ael.c: AEL load process: compiled
>>>>> config
>>>>> > file name '/etc/asterisk/extensions.ael'.
>>>>> > [May 12 08:54:50] NOTICE[2613] pbx_ael.c: AEL load process: merged
>>>>> config
>>>>> > file name '/etc/asterisk/extensions.ael'.
>>>>> > [May 12 08:54:50] WARNING[2613] pbx.c: Context 'ael-local' tries
>>>>> includes
>>>>> > nonexistent context 'ael-parkedcalls'
>>>>> >
>>>>> > my file unicall.conf is this:
>>>>> >
>>>>> > [channels]
>>>>> >
>>>>> > context=e1-inline
>>>>> > usecallerid=yes
>>>>> > hidecallerid=no
>>>>> > threewaycalling=yes
>>>>> > transfer=yes
>>>>> > cancallforward=yes
>>>>> > callreturn=yes
>>>>> > echocancel=yes
>>>>> > echocancelwhenbridged=yes
>>>>> > rxgain=0.0
>>>>> > txgain=0.0
>>>>> > relaxdtmf=yes
>>>>> > callgroup=1
>>>>> > pickupgroup=1
>>>>> > immediate=no
>>>>> > callerid=asreceived
>>>>> > musiconhold=default
>>>>> > protocolclass=mfcr2
>>>>> > protocolvariant=br,20,20,20
>>>>> > protocolend=cpe
>>>>> > group=1
>>>>> > channel => 1-15
>>>>> > channel => 17-31
>>>>> >
>>>>> > and when i do any dial by asterisk return this:
>>>>> >
>>>>> > The 'dial' command is deprecated and will be removed in a future
>>>>> release.
>>>>> > Please use 'console dial' instead.
>>>>> >   == Console is full duplex
>>>>> >     -- Executing [208 at ext-local:1] Dial("OSS/dsp",
>>>>> "Unicall/g1/32719595") in
>>>>> > new stack
>>>>> > [May 12 08:58:43] WARNING[2689]: chan_unicall.c:1034 unicall_call:
>>>>> Make call
>>>>> > failed - Blocked
>>>>> >     -- Couldn't call g1/32719595
>>>>> >     -- Hungup 'UniCall/1-1'
>>>>> >   == Everyone is busy/congested at this time (0:0/0/0)
>>>>> >   == Auto fallthrough, channel 'OSS/dsp' status is 'CHANUNAVAIL'
>>>>> >
>>>>> >
>>>>> >
>>>>> > can somebody help me?
>>>>> >
>>>>> > Sorry for my english.
>>>>> >
>>>>> > Marcelo Nunes Dos santos
>>>>> >
>>>>> --------------------------------------------------------------------------
>>>>> > TI Savarsul - nunes at savarsul.com.br
>>>>> > Blog: makelinux.com.br
>>>>> > Email/MSN: marcelo7889 at gmail.com
>>>>> > twitter: www.twitter.com/marcelonunes
>>>>> >
>>>>> >
>>>>> >
>>>>> > --
>>>>> > _____________________________________________________________________
>>>>> > -- Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>> >
>>>>> > asterisk-r2 mailing list
>>>>> > To UNSUBSCRIBE or update options visit:
>>>>> >   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>> >
>>>>>
>>>>> --
>>>>> _____________________________________________________________________
>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>>
>>>>> asterisk-r2 mailing list
>>>>> To UNSUBSCRIBE or update options visit:
>>>>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>>
>>>>
>>>>
>>>> --
>>>> _____________________________________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>
>>>> asterisk-r2 mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>
>>>
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-r2 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20100512/21260f9a/attachment-0001.htm 