[asterisk-r2] ERROR: process_cas_dchan: received register 0x70 in protocol E1. Ignore
Ettore Pelliccioni
ettore.pelliccioni at techniclite.com
Sat Jul 3 21:24:16 CDT 2010
El hardware de telefonia es un astribank Xorcom XR0057 con 2 puertos
PRI E1/R2 y puertos 8 FXS y otro astribank de 8 puertos FXS y 8
Puertos FXO
El enlace aparece sincronizado y sin errores, pero aun no logramos
llamadas entrantes, las salientes fallan la mayoria de los casos, pero
una que otra se logra sacar, luego de reiniciar los servicios
(asterisk,amportal, dahdi).
Por otra parte, en la consola aparece con frecuencia este mensaje:
NOTICE-xpd_pri: XBUS-00/XPD-00: process_cas_dchan: received register
0x70 in protocol E1. Ignore
NOTICE-xpd_pri: XBUS-00/XPD-01: process_cas_dchan: received register
0x70 in protocol E1. Ignore
y cuando se reinicia el dahdi, aparece este mensaje:
DAHDI_SPANCONFIG failed on span 1: No such device or address (6)
Otro detalle es que los circuitos entrantes aparecen bloqueados (se
liberan al abrir el enlace fisicamente y volver a conectarlo), y por
otra parte al intentar la llamada saliente, el circuito 1 se ocupa
correctamente (Tx:Seized/Rx:Seized ACK), pero aparece el circuito 5
bloqueado (Tx:IDDLE/Rx:BLOCK), para luego normalizarse. El personal de
la operadora, me indica que la señalizacion es MFC-R2.
En cuanto a los archivos de configuracion, hemos basado en el ejemplo
de la libreria OpenR2 :
================================================================================================
system.conf
# Autogenerated by /usr/sbin/dahdi_genconf on Fri Jun 11 18:06:50 2010
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: XBUS-01/XPD-00 "Xorcom XPD #01/00: E1 SALIENTE CANTV" (MASTER)
span=1,1,0,cas,hdb3,crc4
# termtype: te
dchan=16
cas=1-15,17-31:1101
echocanceller=oslec,1-15,17-31
# Span 2: XBUS-01/XPD-01 "Xorcom XPD #01/01: E1 ENTRANTE CANTV"
span=2,2,0,cas,hdb3,crc4
# termtype: te
dchan=47
cas=32-46,48-62:1101
echocanceller=oslec,32-46,48-62
# Span 3: XBUS-01/XPD-10 "Xorcom XPD #01/10: FXS"
fxoks=63
echocanceller=oslec,63
fxoks=64
echocanceller=oslec,64
fxoks=65
echocanceller=oslec,65
fxoks=66
echocanceller=oslec,66
fxoks=67
echocanceller=oslec,67
fxoks=68
echocanceller=oslec,68
fxoks=69
echocanceller=oslec,69
fxoks=70
echocanceller=oslec,70
# Span 4: XBUS-00/XPD-00 "Xorcom XPD #00/00: FXS"
fxoks=71
echocanceller=oslec,71
fxoks=72
echocanceller=oslec,72
fxoks=73
echocanceller=oslec,73
fxoks=74
echocanceller=oslec,74
fxoks=75
echocanceller=oslec,75
fxoks=76
echocanceller=oslec,76
fxoks=77
echocanceller=oslec,77
fxoks=78
echocanceller=oslec,78
# astbanktype: output
fxoks=79
# astbanktype: output
fxoks=80
# astbanktype: input
fxoks=81
# astbanktype: input
fxoks=82
# astbanktype: input
fxoks=83
# astbanktype: input
fxoks=84
# Span 5: XBUS-00/XPD-10 "Xorcom XPD #00/10: FXO"
fxsks=85
echocanceller=oslec,85
fxsks=86
echocanceller=oslec,86
fxsks=87
echocanceller=oslec,87
fxsks=88
echocanceller=oslec,88
fxsks=89
echocanceller=oslec,89
fxsks=90
echocanceller=oslec,90
fxsks=91
echocanceller=oslec,91
fxsks=92
echocanceller=oslec,92
# Global data
loadzone = ve
defaultzone = ve
================================================================================================
dahdi-channels.conf
; Autogenerated by /usr/sbin/dahdi_genconf on Fri Jun 11 18:06:50 2010
; If you edit this file and execute /usr/sbin/dahdi_genconf again,
; your manual changes will be LOST.
; Dahdi Channels Configurations (chan_dahdi.conf)
;
; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended
; to be #include-d by /etc/chan_dahdi.conf that will include the global settings
;
; Span 1: XBUS-01/XPD-00 "Xorcom XPD #01/00: E1" (MASTER)
resetinterval=never
context=from-pstn
group=11
signalling=mfcr2
mfcr2_variant=ve
mfcr2_get_ani_first=yes
mfcr2_immediate_accept=yes
mfcr2_max_ani=10
mfcr2_max_dnis=4
mfcr2_category=national_subscriber
mfcr2_mfback_timeout=-1
mfcr2_metering_pulse_timeout=-1
; esto es para proposito de depuracion
mfcr2_logdir=cantv
mfcr2_logging=all
mfcr2_call_files=yes
channel => 1-15,17-31
; fin de depuracion
group=
context=default
; Span 2: XBUS-01/XPD-01 "Xorcom XPD #01/01: E1"
context=incoming
group=12
signalling = mfcr2
mfcr2_variant=ve
mfcr2_get_ani_first=yes
mfcr2_immediate_accept=yes
mfcr2_max_ani= 15
mfcr2_max_dnis= 3
mfcr2_category=national_subscriber
mfcr2_mfback_timeout=-1
mfcr2_metering_pulse_timeout=-1
; esto es para proposito de depuracion
mfcr2_logdir=cantv
mfcr2_logging=all
mfcr2_call_files=yes
; fin de depuracion
channel => 32-46,48-62
group=
context=default
; Span 3: XBUS-01/XPD-10 "Xorcom XPD #01/10: FXS"
;;; line="63 XPP_FXS/01/10/0"
signalling=fxo_ks
callerid="Channel 63" <4063>
mailbox=4063
group=5
context=from-internal
channel => 63
callerid=
mailbox=
group=
context=default
;;; line="64 XPP_FXS/01/10/1"
signalling=fxo_ks
callerid="Channel 64" <4064>
mailbox=4064
group=5
context=from-internal
channel => 64
callerid=
mailbox=
group=
context=default
;;; line="65 XPP_FXS/01/10/2"
signalling=fxo_ks
callerid="Channel 65" <4065>
mailbox=4065
group=5
context=from-internal
channel => 65
callerid=
mailbox=
group=
context=default
;;; line="66 XPP_FXS/01/10/3"
signalling=fxo_ks
callerid="Channel 66" <4066>
mailbox=4066
group=5
context=from-internal
channel => 66
callerid=
mailbox=
group=
context=default
;;; line="67 XPP_FXS/01/10/4"
signalling=fxo_ks
callerid="Channel 67" <4067>
mailbox=4067
group=5
context=from-internal
channel => 67
callerid=
mailbox=
group=
context=default
;;; line="68 XPP_FXS/01/10/5"
signalling=fxo_ks
callerid="Channel 68" <4068>
mailbox=4068
group=5
context=from-internal
channel => 68
callerid=
mailbox=
group=
context=default
;;; line="69 XPP_FXS/01/10/6"
signalling=fxo_ks
callerid="Channel 69" <4069>
mailbox=4069
group=5
context=from-internal
channel => 69
callerid=
mailbox=
group=
context=default
;;; line="70 XPP_FXS/01/10/7"
signalling=fxo_ks
callerid="Channel 70" <4070>
mailbox=4070
group=5
context=from-internal
channel => 70
callerid=
mailbox=
group=
context=default
; Span 4: XBUS-00/XPD-00 "Xorcom XPD #00/00: FXS"
;;; line="71 XPP_FXS/00/00/0"
signalling=fxo_ks
callerid="Channel 71" <4071>
mailbox=4071
group=5
context=from-internal
channel => 71
callerid=
mailbox=
group=
context=default
;;; line="72 XPP_FXS/00/00/1"
signalling=fxo_ks
callerid="Channel 72" <4072>
mailbox=4072
group=5
context=from-internal
channel => 72
callerid=
mailbox=
group=
context=default
;;; line="73 XPP_FXS/00/00/2"
signalling=fxo_ks
callerid="Channel 73" <4073>
mailbox=4073
group=5
context=from-internal
channel => 73
callerid=
mailbox=
group=
context=default
;;; line="74 XPP_FXS/00/00/3"
signalling=fxo_ks
callerid="Channel 74" <4074>
mailbox=4074
group=5
context=from-internal
channel => 74
callerid=
mailbox=
group=
context=default
;;; line="75 XPP_FXS/00/00/4"
signalling=fxo_ks
callerid="Channel 75" <4075>
mailbox=4075
group=5
context=from-internal
channel => 75
callerid=
mailbox=
group=
context=default
;;; line="76 XPP_FXS/00/00/5"
signalling=fxo_ks
callerid="Channel 76" <4076>
mailbox=4076
group=5
context=from-internal
channel => 76
callerid=
mailbox=
group=
context=default
;;; line="77 XPP_FXS/00/00/6"
signalling=fxo_ks
callerid="Channel 77" <4077>
mailbox=4077
group=5
context=from-internal
channel => 77
callerid=
mailbox=
group=
context=default
;;; line="78 XPP_FXS/00/00/7"
signalling=fxo_ks
callerid="Channel 78" <4078>
mailbox=4078
group=5
context=from-internal
channel => 78
callerid=
mailbox=
group=
context=default
;;; line="79 XPP_OUT/00/00/8"
signalling=fxo_ks
callerid="Channel 79" <4079>
mailbox=4079
group=
context=astbank-output
channel => 79
callerid=
mailbox=
group=
context=default
;;; line="80 XPP_OUT/00/00/9"
signalling=fxo_ks
callerid="Channel 80" <4080>
mailbox=4080
group=
context=astbank-output
channel => 80
callerid=
mailbox=
group=
context=default
;;; line="81 XPP_IN/00/00/10"
signalling=fxo_ks
callerid="Channel 81" <4081>
mailbox=4081
group=
context=astbank-input
immediate=yes
channel => 81
callerid=
mailbox=
group=
context=default
immediate=no
;;; line="82 XPP_IN/00/00/11"
signalling=fxo_ks
callerid="Channel 82" <4082>
mailbox=4082
group=
context=astbank-input
immediate=yes
channel => 82
callerid=
mailbox=
group=
context=default
immediate=no
;;; line="83 XPP_IN/00/00/12"
signalling=fxo_ks
callerid="Channel 83" <4083>
mailbox=4083
group=
context=astbank-input
immediate=yes
channel => 83
callerid=
mailbox=
group=
context=default
immediate=no
;;; line="84 XPP_IN/00/00/13"
signalling=fxo_ks
callerid="Channel 84" <4084>
mailbox=4084
group=
context=astbank-input
immediate=yes
channel => 84
callerid=
mailbox=
group=
context=default
immediate=no
; Span 5: XBUS-00/XPD-10 "Xorcom XPD #00/10: FXO"
;;; line="85 XPP_FXO/00/10/0"
signalling=fxs_ks
;;callerid=asreceived
callerid=02129539340
group=0
context=from-pstn
channel => 85
callerid=
group=
context=default
;;; line="86 XPP_FXO/00/10/1"
signalling=fxs_ks
;;callerid=asreceived
callerid=02129530416
group=0
context=from-pstn
channel => 86
callerid=
group=
context=default
;;; line="87 XPP_FXO/00/10/2"
signalling=fxs_ks
;;callerid=asreceived
callerid=02129532851
group=0
context=from-pstn
channel => 87
callerid=
group=
context=default
;;; line="88 XPP_FXO/00/10/3"
signalling=fxs_ks
;;callerid=asreceived
callerid=02129538856
group=0
context=from-pstn
channel => 88
callerid=
group=
context=default
;;; line="89 XPP_FXO/00/10/4"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 89
callerid=
group=
context=default
;;; line="90 XPP_FXO/00/10/5"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 90
callerid=
group=
context=default
;;; line="91 XPP_FXO/00/10/6"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 91
callerid=
group=
context=default
;;; line="92 XPP_FXO/00/10/7"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 92
callerid=
group=
context=default
==============================================================================================================================================
chan_dahdi.conf
; Auto-generated by /usr/sbin/hardware_detector
[trunkgroups]
[channels]
context=from-pstn
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
faxdetect=incoming
echotraining=800
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
language=es
;Uncomment these lines if you have problems with the disconection of
your analog lines
busydetect=yes
busycount=3
immediate=no
#include dahdi-channels.conf
#include chan_dahdi_additional.conf
======================================================================================================================================================
las trazas de r2: (llamadas salientes fallidas, no completan)
[18:27:14:224] [Thread: 1095379264] [Chan 1] - Call started at Fri Jul
2 18:27:14 2010 on chan 1 [openr2 version 1.3.0, revision (release)]
[18:27:14:224] [Thread: 1095379264] [Chan 1] - Outgoing call
proceeding: ANI=3494, DNIS=04141111330, Category=National Subscriber
[18:27:14:224] [Thread: 1095379264] [Chan 1] - CAS Tx >> [SEIZE] 0x00
[18:27:14:225] [Thread: 1095379264] [Chan 1] - CAS Raw Tx >> 0x01
[18:27:14:225] [Thread: 1095379264] [Chan 1] - scheduled timer id 2 (r2_seize)
[18:27:14:257] [Thread: 1095379264] [Chan 1] - Bits changed from 0x08 to 0x0C
[18:27:14:257] [Thread: 1095379264] [Chan 1] - CAS Rx << [SEIZE ACK] 0x0C
[18:27:14:257] [Thread: 1095379264] [Chan 1] - Attempting to cancel
timer timer 2
[18:27:14:257] [Thread: 1095379264] [Chan 1] - timer id 2 found,
cancelling it now
[18:27:14:257] [Thread: 1095379264] [Chan 1] - MFC/R2 call acknowledge!
[18:27:14:257] [Thread: 1095379264] [Chan 1] - Sending DNIS digit 0
[18:27:14:257] [Thread: 1095379264] [Chan 1] - MF Tx >> 0 [ON]
======================================================================================================================================================
las trazas de r2: (llamadas entrantes fallidas, no completan)
[18:29:15:501] [Thread: 1102502208] [Chan 48] - Call started at Fri
Jul 2 18:29:15 2010 on chan 48 [openr2 version 1.3.0, revision
(release)]
[18:29:15:501] [Thread: 1102502208] [Chan 48] - Initialized R2 MF detector
[18:29:15:501] [Thread: 1102502208] [Chan 48] - CAS Tx >> [SEIZE ACK] 0x0C
[18:29:15:501] [Thread: 1102502208] [Chan 48] - CAS Raw Tx >> 0x0D
[18:29:15:571] [Thread: 1102502208] [Chan 48] - MF Rx << 5 [ON]
[18:29:15:571] [Thread: 1102502208] [Chan 48] - Attempting to cancel
timer timer 0
[18:29:15:571] [Thread: 1102502208] [Chan 48] - Cannot cancel timer 0
[18:29:15:571] [Thread: 1102502208] [Chan 48] - Getting DNIS digit 5
[18:29:15:571] [Thread: 1102502208] [Chan 48] - DNIS so far: 5,
expected length: 5
[18:29:15:571] [Thread: 1102502208] [Chan 48] - MF Tx >> 5 [ON]
[18:29:15:571] [Thread: 1102502208] [Chan 48] - scheduled timer id 2
(mf_back_cycle)
[18:29:20:571] [Thread: 1102502208] [Chan 48] - Attempting to cancel
timer timer 2
[18:29:20:571] [Thread: 1102502208] [Chan 48] - timer id 2 found,
cancelling it now
[18:29:20:571] [Thread: 1102502208] [Chan 48] - calling timer 2
(mf_back_cycle) callback
[18:29:20:571] [Thread: 1102502208] [Chan 48] - MF back cycle timed out!
[18:29:20:571] [Thread: 1102502208] [Chan 48] - Protocol error. Reason
= Multi Frequency Cycle Timeout, R2 State = Seize ACK Transmitted, MF
state = Category Request Transmitted, MF Group = Backward Group A, CAS
= 0x00
DNIS = 5, ANI = , MF = 0x35
[18:29:20:571] [Thread: 1102502208] [Chan 48] - Attempting to cancel
timer timer 0
[18:29:20:571] [Thread: 1102502208] [Chan 48] - Cannot cancel timer 0
[18:29:26:779] [Thread: 1102502208] [Chan 48] - Call started at Fri
Jul 2 18:29:26 2010 on chan 48 [openr2 version 1.3.0, revision
(release)]
[18:29:26:779] [Thread: 1102502208] [Chan 48] - Initialized R2 MF detector
[18:29:26:779] [Thread: 1102502208] [Chan 48] - CAS Tx >> [SEIZE ACK] 0x0C
[18:29:26:779] [Thread: 1102502208] [Chan 48] - CAS Raw Tx >> 0x0D
[18:29:26:813] [Thread: 1102502208] [Chan 48] - Bits changed from 0x00 to 0x08
[18:29:26:813] [Thread: 1102502208] [Chan 48] - CAS Rx << [CLEAR FORWARD] 0x08
[18:29:26:813] [Thread: 1102502208] [Chan 48] - Far end disconnected.
Reason: Normal Clearing
[18:29:26:813] [Thread: 1102502208] [Chan 48] - Call ended
[18:29:26:813] [Thread: 1102502208] [Chan 48] - Attempting to cancel
timer timer 0
[18:29:26:813] [Thread: 1102502208] [Chan 48] - Cannot cancel timer 0
ettore at ubuntu:~/proyecto_asterisk_ona/var/log/asterisk/mfcr2/cantv$
======================================================================================================================================================
[root at elastix ~]# service dahdi restart
Unloading DAHDI hardware modules: done
Loading DAHDI hardware modules:
wct4xxp: [ OK ]
wcte12xp: [ OK ]
wct1xxp: [ OK ]
wcte11xp: [ OK ]
wctdm24xxp: [ OK ]
wcfxo: [ OK ]
wctdm: [ OK ]
wcb4xxp: [ OK ]
wctc4xxp: [ OK ]
xpp_usb: [ OK ]
opvxa1200: [ OK ]
ystdm8xx: [ OK ]
ystdm16xx: [ OK ]
ap400: [ OK ]
dahdi_dynamic_eth: [ OK ]
dahdi_dynamic_ethmf: [ OK ]
ax1600p: [ OK ]
rxt1: DAHDI Tools Version - 2.3.0
DAHDI Version: 2.3.0.1
Echo Canceller(s):
Configuration
======================
SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 2: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 01)
Channel 02: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 02)
Channel 03: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 03)
Channel 04: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 04)
Channel 05: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 05)
Channel 06: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 06)
Channel 07: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 07)
Channel 08: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 08)
Channel 09: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 09)
Channel 10: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 10)
Channel 11: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 11)
Channel 12: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 12)
Channel 13: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 13)
Channel 14: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 14)
Channel 15: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 15)
Channel 16: D-channel (Default) (Echo Canceler: none) (Slaves: 16)
Channel 17: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 17)
Channel 18: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 18)
Channel 19: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 19)
Channel 20: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 20)
Channel 21: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 21)
Channel 22: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 22)
Channel 23: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 23)
Channel 24: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 24)
Channel 25: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 25)
Channel 26: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 26)
Channel 27: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 27)
Channel 28: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 28)
Channel 29: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 29)
Channel 30: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 30)
Channel 31: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 31)
Channel 32: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 32)
Channel 33: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 33)
Channel 34: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 34)
Channel 35: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 35)
Channel 36: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 36)
Channel 37: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 37)
Channel 38: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 38)
Channel 39: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 39)
Channel 40: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 40)
Channel 41: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 41)
Channel 42: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 42)
Channel 43: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 43)
Channel 44: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 44)
Channel 45: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 45)
Channel 46: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 46)
Channel 47: D-channel (Default) (Echo Canceler: none) (Slaves: 47)
Channel 48: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 48)
Channel 49: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 49)
Channel 50: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 50)
Channel 51: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 51)
Channel 52: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 52)
Channel 53: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 53)
Channel 54: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 54)
Channel 55: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 55)
Channel 56: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 56)
Channel 57: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 57)
Channel 58: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 58)
Channel 59: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 59)
Channel 60: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 60)
Channel 61: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 61)
Channel 62: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 62)
Channel 63: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 63)
Channel 64: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 64)
Channel 65: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 65)
Channel 66: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 66)
Channel 67: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 67)
Channel 68: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 68)
Channel 69: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 69)
Channel 70: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 70)
Channel 71: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 71)
Channel 72: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 72)
Channel 73: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 73)
Channel 74: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 74)
Channel 75: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 75)
Channel 76: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 76)
Channel 77: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 77)
Channel 78: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 78)
Channel 79: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 79)
Channel 80: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 80)
Channel 81: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 81)
Channel 82: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 82)
Channel 83: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 83)
Channel 84: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 84)
Channel 85: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 85)
Channel 86: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 86)
Channel 87: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 87)
Channel 88: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 88)
Channel 89: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 89)
Channel 90: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 90)
Channel 91: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 91)
Channel 92: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 92)
92 channels to configure.
DAHDI_SPANCONFIG failed on span 1: No such device or address (6)
[ OK ]
r1t1: DAHDI Tools Version - 2.3.0
DAHDI Version: 2.3.0.1
Echo Canceller(s):
Configuration
======================
SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 2: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 01)
Channel 02: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 02)
Channel 03: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 03)
Channel 04: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 04)
Channel 05: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 05)
Channel 06: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 06)
Channel 07: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 07)
Channel 08: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 08)
Channel 09: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 09)
Channel 10: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 10)
Channel 11: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 11)
Channel 12: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 12)
Channel 13: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 13)
Channel 14: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 14)
Channel 15: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 15)
Channel 16: D-channel (Default) (Echo Canceler: none) (Slaves: 16)
Channel 17: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 17)
Channel 18: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 18)
Channel 19: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 19)
Channel 20: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 20)
Channel 21: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 21)
Channel 22: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 22)
Channel 23: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 23)
Channel 24: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 24)
Channel 25: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 25)
Channel 26: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 26)
Channel 27: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 27)
Channel 28: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 28)
Channel 29: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 29)
Channel 30: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 30)
Channel 31: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 31)
Channel 32: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 32)
Channel 33: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 33)
Channel 34: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 34)
Channel 35: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 35)
Channel 36: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 36)
Channel 37: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 37)
Channel 38: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 38)
Channel 39: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 39)
Channel 40: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 40)
Channel 41: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 41)
Channel 42: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 42)
Channel 43: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 43)
Channel 44: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 44)
Channel 45: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 45)
Channel 46: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 46)
Channel 47: D-channel (Default) (Echo Canceler: none) (Slaves: 47)
Channel 48: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 48)
Channel 49: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 49)
Channel 50: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 50)
Channel 51: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 51)
Channel 52: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 52)
Channel 53: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 53)
Channel 54: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 54)
Channel 55: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 55)
Channel 56: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 56)
Channel 57: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 57)
Channel 58: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 58)
Channel 59: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 59)
Channel 60: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 60)
Channel 61: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 61)
Channel 62: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 62)
Channel 63: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 63)
Channel 64: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 64)
Channel 65: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 65)
Channel 66: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 66)
Channel 67: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 67)
Channel 68: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 68)
Channel 69: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 69)
Channel 70: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 70)
Channel 71: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 71)
Channel 72: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 72)
Channel 73: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 73)
Channel 74: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 74)
Channel 75: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 75)
Channel 76: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 76)
Channel 77: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 77)
Channel 78: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 78)
Channel 79: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 79)
Channel 80: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 80)
Channel 81: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 81)
Channel 82: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 82)
Channel 83: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 83)
Channel 84: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 84)
Channel 85: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 85)
Channel 86: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 86)
Channel 87: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 87)
Channel 88: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 88)
Channel 89: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 89)
Channel 90: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 90)
Channel 91: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 91)
Channel 92: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 92)
92 channels to configure.
DAHDI_SPANCONFIG failed on span 1: No such device or address (6)
[ OK ]
rcbfx: DAHDI Tools Version - 2.3.0
DAHDI Version: 2.3.0.1
Echo Canceller(s):
Configuration
======================
SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 2: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 01)
Channel 02: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 02)
Channel 03: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 03)
Channel 04: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 04)
Channel 05: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 05)
Channel 06: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 06)
Channel 07: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 07)
Channel 08: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 08)
Channel 09: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 09)
Channel 10: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 10)
Channel 11: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 11)
Channel 12: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 12)
Channel 13: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 13)
Channel 14: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 14)
Channel 15: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 15)
Channel 16: D-channel (Default) (Echo Canceler: none) (Slaves: 16)
Channel 17: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 17)
Channel 18: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 18)
Channel 19: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 19)
Channel 20: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 20)
Channel 21: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 21)
Channel 22: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 22)
Channel 23: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 23)
Channel 24: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 24)
Channel 25: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 25)
Channel 26: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 26)
Channel 27: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 27)
Channel 28: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 28)
Channel 29: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 29)
Channel 30: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 30)
Channel 31: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 31)
Channel 32: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 32)
Channel 33: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 33)
Channel 34: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 34)
Channel 35: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 35)
Channel 36: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 36)
Channel 37: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 37)
Channel 38: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 38)
Channel 39: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 39)
Channel 40: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 40)
Channel 41: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 41)
Channel 42: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 42)
Channel 43: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 43)
Channel 44: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 44)
Channel 45: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 45)
Channel 46: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 46)
Channel 47: D-channel (Default) (Echo Canceler: none) (Slaves: 47)
Channel 48: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 48)
Channel 49: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 49)
Channel 50: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 50)
Channel 51: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 51)
Channel 52: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 52)
Channel 53: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 53)
Channel 54: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 54)
Channel 55: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 55)
Channel 56: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 56)
Channel 57: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 57)
Channel 58: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 58)
Channel 59: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 59)
Channel 60: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 60)
Channel 61: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 61)
Channel 62: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 62)
Channel 63: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 63)
Channel 64: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 64)
Channel 65: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 65)
Channel 66: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 66)
Channel 67: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 67)
Channel 68: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 68)
Channel 69: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 69)
Channel 70: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 70)
Channel 71: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 71)
Channel 72: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 72)
Channel 73: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 73)
Channel 74: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 74)
Channel 75: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 75)
Channel 76: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 76)
Channel 77: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 77)
Channel 78: FXO Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 78)
Channel 79: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 79)
Channel 80: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 80)
Channel 81: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 81)
Channel 82: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 82)
Channel 83: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 83)
Channel 84: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 84)
Channel 85: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 85)
Channel 86: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 86)
Channel 87: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 87)
Channel 88: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 88)
Channel 89: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 89)
Channel 90: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 90)
Channel 91: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 91)
Channel 92: FXS Kewlstart (Default) (Echo Canceler: oslec) (Slaves: 92)
92 channels to configure.
DAHDI_SPANCONFIG failed on span 1: No such device or address (6)
[ OK ]
opvxd115: [ OK ]
Astribanks initialization is starting
Astribanks detection
Astribanks initializing spans
XPDS_READY: XBUS-00: 3/3
XPDS_READY: XBUS-01: 2/2
Astribanks initialization is done
Running dahdi_cfg: [ OK ]
More information about the asterisk-r2
mailing list