[asterisk-r2] Back digit sequence for variable length DNIS only (no ANI) for arg

[Moises Silva]

If you need help with this you must post a full protocol call file instead
of your own manual tracing.

-- 
Moises Silva
Senior Software Engineer
Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3
Canada
t. 1 905 474 1990 x 128 | e. moy at sangoma.com

On Fri, Feb 26, 2010 at 3:34 PM, tbrown <tbrown at excelocity.com> wrote:

>  Howdy,
>
>
>
> I observe the following R2 compelled sequence when either sending or
> receiving a variable (in the sense that there are less digits than the
> maximum configured) length DNIS with no ANI to/from OpenR2 using the
> Argentine variant (I believe that Brazilian variant behaves the same way as
> well).  When the final digit ‘5’ is received neither OpenR2 nor our
> client’s stack seems to react & send what I assume should be the category
> digit.  Any insight into this problem would be appreciated.
>
>
>
> 1 ->
>
> < - 1
>
> 2 ->
>
> < - 1
>
> 3 ->
>
> < - 1
>
> 4 ->
>
> < - 1
>
> 5 ->
>
> < - 1
>
> 6 ->
>
> < - 1
>
> 7 ->
>
> < - 1
>
> Timeout
>
> < - 5
>
> Nothing
>
>
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20100226/3c9c7c62/attachment.htm