[asterisk-r2] doubt about how to handle calls with openr2
Moises Silva
moises.silva at gmail.com
Mon Apr 12 09:11:38 CDT 2010
Where is this? and what is connected at the other side?
It seems the call is initiated, we reply with a "seize ack" signal, but then
2 seconds later they clear the call. Either because we don't detect their
tones on the line ( may be different frequencies being used, like DTMF?? )
or because they don't see our "seize ack" signal and hangup.
Btw, your "contact us" web page does not work (
http://www.telsyssolution.com/web/siteassets/contacts/ )
Moises Silva
Senior Software Engineer
Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3
Canada
t. 1 905 474 1990 x 128 | e. moy at sangoma.com
2010/4/12 Juan Manuel Rafael Suárez <jrafael at telsyssolution.com>
> New update in log:
>
>
>
>
>
> [00:16:02:162] [Thread: 5110672] [Chan 1] - Call started at Mon Apr 12
> 00:16:02 2010 on chan 1 [openr2 version 1.3.0, revision (release)]
>
> [00:16:02:162] [Thread: 5110672] [Chan 1] - Initialized R2 MF detector
>
> [00:16:02:162] [Thread: 5110672] [Chan 1] - CAS Tx >> [SEIZE ACK] 0x0C
>
> [00:16:02:162] [Thread: 5110672] [Chan 1] - CAS Raw Tx >> 0x0D
>
> [00:16:04:074] [Thread: 5110672] [Chan 1] - Bits changed from 0x00 to 0x08
>
> [00:16:04:074] [Thread: 5110672] [Chan 1] - CAS Rx << [CLEAR FORWARD] 0x08
>
> [00:16:04:074] [Thread: 5110672] [Chan 1] - Far end disconnected. Reason:
> Normal Clearing
>
> [00:16:04:074] [Thread: 5110672] [Chan 1] - Call ended
>
> [00:16:04:074] [Thread: 5110672] [Chan 1] - Attempting to cancel timer
> timer 0
>
> [00:16:04:074] [Thread: 5110672] [Chan 1] - Cannot cancel timer 0
>
>
>
>
>
> Any comment?
>
>
>
> JM
>
>
>
>
>
>
>
> * *
>
> *Juan Manuel Rafael Suárez** – **Director Comercial*
>
> *www.telsyssolution.com* <http://www.telsyssolution.com>* | **
> jrafael at telsyssolution.com** | ** t *(81) 8881-0101 ext 444*| ** c *044
> 8110801650
>
>
>
>
>
>
>
> [image: cid:image002.jpg at 01C92397.57F83D10]
>
>
>
> *Business Continuity with Intelligent communication***
>
>
>
>
>
> *De:* Juan Manuel Rafael Suárez [mailto:jrafael at telsyssolution.com]
> *Enviado el:* Lunes, 12 de Abril de 2010 12:08 a.m.
> *Para:* 'asterisk-r2 at lists.digium.com'
> *Asunto:* doubt about how to handle calls with openr2
>
>
>
> I have trixbox 2.8 with openr2 installed,
>
>
>
> Actually I connected 2 of them with a E1 crossover, cable.
>
>
>
>
>
> Mfcr2 seems to be idle in both sides, but when I send calls from one to
> another, I receive
>
>
>
>
>
> “chan_dahdi.c:1523 dahdi_r2_on_call_init: New MFC/R2 call detected on chan
> 1.”
>
>
>
> And that’s is all, asterisk just stay there..
>
>
>
>
>
> trixbox1*CLI> mfcr2 show channels
>
> Chan Variant Max ANI Max DNIS ANI First Immediate Accept Tx CAS Rx CAS
>
> 1 MX 10 4 No No IDLE IDLE
>
> 2 MX 10 4 No No IDLE IDLE
>
> 3 MX 10 4 No No IDLE IDLE
>
> 4 MX 10 4 No No IDLE IDLE
>
> 5 MX 10 4 No No IDLE IDLE
>
> 6 MX 10 4 No No IDLE IDLE
>
> 7 MX 10 4 No No IDLE IDLE
>
> 8 MX 10 4 No No IDLE IDLE
>
> 9 MX 10 4 No No IDLE IDLE
>
> 10 MX 10 4 No No IDLE IDLE
>
> 11 MX 10 4 No No IDLE IDLE
>
> 12 MX 10 4 No No IDLE IDLE
>
> 13 MX 10 4 No No IDLE IDLE
>
> 14 MX 10 4 No No IDLE IDLE
>
> 15 MX 10 4 No No IDLE IDLE
>
> 17 MX 10 4 No No IDLE IDLE
>
> 18 MX 10 4 No No IDLE IDLE
>
> 19 MX 10 4 No No IDLE IDLE
>
> 20 MX 10 4 No No IDLE IDLE
>
> 21 MX 10 4 No No IDLE IDLE
>
> 22 MX 10 4 No No IDLE IDLE
>
> 23 MX 10 4 No No IDLE IDLE
>
> 24 MX 10 4 No No IDLE IDLE
>
> 25 MX 10 4 No No IDLE IDLE
>
> 26 MX 10 4 No No IDLE IDLE
>
> 27 MX 10 4 No No IDLE IDLE
>
> 28 MX 10 4 No No IDLE IDLE
>
> 29 MX 10 4 No No IDLE IDLE
>
> 30 MX 10 4 No No IDLE IDLE
>
> 31 MX 10 4 No No IDLE IDLE
>
>
>
>
>
> Is there anything about auto accept calls?
>
>
>
> JM
>
>
>
>
>
>
>
>
>
>
>
>
>
> * *
>
> *Juan Manuel Rafael Suárez** – **Director Comercial*
>
> *www.telsyssolution.com* <http://www.telsyssolution.com>* | **
> jrafael at telsyssolution.com** | ** t *(81) 8881-0101 ext 444*| ** c *044
> 8110801650
>
>
>
>
>
>
>
> [image: cid:image002.jpg at 01C92397.57F83D10]
>
>
>
> *Business Continuity with Intelligent communication***
>
>
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-r2
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20100412/63b8d045/attachment-0001.htm
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 3608 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-r2/attachments/20100412/63b8d045/attachment-0001.jpeg
More information about the asterisk-r2
mailing list