[asterisk-r2] OpenR2 supported patches for Asterisk (blocked/hanged channels possibly fixed!!)
Sebastian Peschko
speschko at gmail.com
Wed Sep 23 11:29:41 CDT 2009
Moy,
up to now I have been operating with the new p1 patched 1.4.26.2 for
over a week with no problems. I did have to make the change though with
Telmex to recieve the Caller ID after DID because originally it was set
up to take the Caller ID before DID and I was getting disconnects of the
call from Telmex. I finally managed to get someone from Telmex out here
with a tester to see our bit signalling and it looked perfect now. Just
to clarify this trunk is mainly being used incoming and practically no
outgoing calls.
Sebastian
On Wed, 2009-09-23 at 11:15 -0400, Moises Silva wrote:
> I am not sure if it is asterisk specific. But 3 persons have reported
> this, 1 said 1.4.26.2-p1 solved the problem for them, but 2 persons,
> including you, said is still present in some of their installations,
> not all. I need access to a box with the blocked channels which I
> understand is sometimes difficult. I am usually online in IRC at
> irc.freenode.org in #openr2 channel, my nick there is moy, if you
> happen to see the problem and want me to debug it in realtime, contact
> me there.
>
>
>
> If you cannot, I need you to download svn
> http://openr2.googlecode.com/svn/branches/release-1
>
>
> In that branch I just commited a small script that collects
> information about your Asterisk R2 lines. Whenever you get a line
> blocked, execute the script at debug/asterisk/astdumpr2.sh specifying
> as first argument the name of the output file. This script is harmless
> for your installation, so it's safe to execute it in production
> environments.
>
>
> Execute the script 3 times with 15 seconds intervals and of course
> save the output to different files (debug1.txt, debug2.txt etc)
>
>
> Pastebin the resulting files and send us the link.
>
>
>
>
> On Tue, Sep 22, 2009 at 7:40 PM, Rafael Prado Rocchi
> <prado at practis.com.br> wrote:
>
> Any news about it?
>
> We still detected ClearFO problem with 1.4.26.2-p1 patch.
>
>
>
> Is this error an asterisk version specific?
>
>
>
>
>
>
>
>
> From:asterisk-r2-bounces at lists.digium.com
> [mailto:asterisk-r2-bounces at lists.digium.com] On Behalf Of
> Moises Silva
> Sent: segunda-feira, 14 de setembro de 2009 10:44
> To: asterisk-r2 at lists.digium.com
> Subject: Re: [asterisk-r2] OpenR2 supported patches for
> Asterisk (blocked/hanged channels possibly fixed!!)
>
>
>
>
>
> you can revert the old patch with patch -R < old-patch.patch
> and then apply the new one and re-install :-)
>
>
> On Mon, Sep 14, 2009 at 7:29 AM, Sebastian Peschko
> <speschko at gmail.com> wrote:
>
>
> If i have already used the 1.4.26.2 that you had before, how
> do i apply the new patch or do i have to do a complete
> reinstall?
>
> Saludos/Regards
>
>
> Sebastian Peschko
>
>
>
> On 13/09/2009, at 22:25, Moises Silva <moises.silva at gmail.com>
> wrote:
>
>
> Hello everyone,
>
>
>
>
>
> Just for your information. I released a new patch for
> Asterisk 1.4 (openr2-asterisk-1.4.26.2-p1.patch),
> everyone using Asterisk 1.4 is encouraged to upgrade.
> There was some reports (including reports in this
> mailing list) about lines getting stuck in Clear
> Fo/Clear Ba states. This new patch has a tentative fix
> for that problem.
>
>
>
>
>
> I also deprecated the patch for 1.6.x, everyone using
> Asterisk 1.6 should use 1.6.2 which has already R2
> support built-in (when openr2 is installed in the
> system, no patching needed).
>
>
>
>
>
> For Asterisk 1.4 I deprecated all the old patches, you
> can still download them in the deprecated section, but
> that is totally unsupported.
>
>
>
>
>
> For Asterisk 1.2, I deprecated all patches, the
> patches should still work though, but they are
> unsupported.
>
>
>
>
>
> FreeSWITCH support is available via svn trunk only.
>
> --
> Moises Silva
> Software Developer
> Sangoma Technologies Inc. | 50 McIntosh Drive, Suite
> 120, Markham ON L3R 9T3 Canada
> t. 1 905 474 1990 x 128 | e. moy at sangoma.com
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by
> http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-r2
>
>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by
> http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-r2
>
>
>
>
>
>
> --
> Moises Silva
> Software Developer
> Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120,
> Markham ON L3R 9T3 Canada
> t. 1 905 474 1990 x 128 | e. moy at sangoma.com
>
>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by
> http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-r2
>
>
>
>
> --
> Moises Silva
> Software Developer
> Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON
> L3R 9T3 Canada
> t. 1 905 474 1990 x 128 | e. moy at sangoma.com
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-r2
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20090923/26e99a90/attachment.htm
More information about the asterisk-r2
mailing list