[asterisk-r2] RED Alarm with Telmex R2
Sebastian Peschko
speschko at gmail.com
Thu Sep 10 16:07:46 CDT 2009
dahdi_tool:
Current Alarms: Red Alarm │ │
│ │ Sync Source: Internally clocked │
↑ │
│ │ IRQ Misses: 0 │
▒ │
│ │ Bipolar Viol: 0 │
▒ │
│ │ Tx/Rx Levels: 0/ 0 │
▒ │
│ │ Total/Conf/Act: 31/ 30/ 30 │
▒ │
│ │ 1111111111222222222233 ┌──────┐ │
▒ │
│ │ 1234567890123456789012345678901 │ Back │ │
▒ │
│ │ TxA 111111111111111 111111111111111 └──────┘ │
▒ │
│ │ TxB 000000000000000 111111111111111 │
▮ │
│ │ TxC 000000000000000 000000000000000 │
↓ │
│ │ TxD 111111111111111 111111111111111 │
│
│ │ ┌──────┐ │
│
│ │ RxA 111111111111111 111111111111111 │ Loop │ │
│
│ │ RxB 111111111111111 111111111111111 └──────┘ │
│
│ │ RxC 000000000000000 000000000000000 │
│
│ │ RxD 111111111111111 111111111111111 │
wanrouter status:
Devices currently active:
wanpipe1
Wanpipe Config:
Device name | Protocol Map | Adapter | IRQ | Slot/IO | If's | CLK |
Baud rate |
wanpipe1 | N/A | A101/1D/A102/2D/4/4D/8| 169 | 4 | 1
| N/A | 0 |
Wanrouter Status:
Device name | Protocol | Station | Status |
wanpipe1 | AFT TE1 | N/A | Disconnected |
Does this mean that there is something wrong with the WANROUTER
drivers???
SP
On Thu, 2009-09-10 at 16:03 -0500, Sebastian Peschko wrote:
> Yes they both have red alarm! Does this mean I still have a HW
> problem? The physical connection is exactly the same as before and I
> have also tried to invert the Coax just in case but it does not leave
> the red alarm state.
>
> SP
>
> On Thu, 2009-09-10 at 16:43 -0400, Moises Silva wrote:
>
> > What does dahdi_tool or zttool say? red alarm? if you have any
> > physical layer alarms you must fix those first before even trying to
> > start playing with Asterisk or openr2 stuff.
> >
> > On Thu, Sep 10, 2009 at 4:31 PM, Sebastian Peschko
> > <speschko at gmail.com> wrote:
> >
> > I had Asterisk 1.25.0 and openr2-2.0.x working with a
> > fractional E1 (ch1-15) working up to now but needed the new
> > IAX security feature because I was being hacked.
> >
> > I have now installed Asterisk 1.4.26.2 with the
> > openr2-asterisk-1.4.26.2.patch and openr2-1.2.0.I am now
> > getting a RED alarm with all the RX channels blocked from
> > Telmex. I have called them and they say that they see a
> > remote alarm but on their side they are idle. On my side I
> > have:
> >
> > Ch Var ANI DNIS ANI First Immed Tx CAS Rx CAS
> > 1 MX 16 4 No No
> > IDLE BLOCK
> > 2 MX 16 4 No No
> > IDLE BLOCK
> > 3 MX 16 4 No No
> > IDLE BLOCK
> > 4 MX 16 4 No No
> > IDLE BLOCK
> > 5 MX 16 4 No No
> > IDLE BLOCK
> > 6 MX 16 4 No No
> > IDLE BLOCK
> > 7 MX 16 4 No No
> > IDLE BLOCK
> > 8 MX 16 4 No No
> > IDLE BLOCK
> > 9 MX 16 4 No No
> > IDLE BLOCK
> > 10 MX 16 4 No No
> > IDLE BLOCK
> > 11 MX 16 4 No No
> > IDLE BLOCK
> > 12 MX 16 4 No No
> > IDLE BLOCK
> > 13 MX 16 4 No No
> > IDLE BLOCK
> > 14 MX 16 4 No No
> > IDLE BLOCK
> > 15 MX 16 4 No No
> > IDLE BLOCK
> >
> > Is there anyone running this software and has this running
> > or has suggestions to what I might be doing wrong?
> >
> >
> >
> > _______________________________________________
> > --Bandwidth and Colocation Provided by
> > http://www.api-digital.com--
> >
> > asterisk-r2 mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-r2
> >
> >
> >
> >
> > --
> > Moises Silva
> > Software Developer
> > Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON
> > L3R 9T3 Canada
> > t. 1 905 474 1990 x 128 | e. moy at sangoma.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20090910/1a47a4e9/attachment-0001.htm
More information about the asterisk-r2
mailing list