[asterisk-r2] Protocol error

[Gabriel Durante]

After changing mfcr2_forced_release= to no,  on the file chan_dahdi.conf no more protocol errors.

All working fine.

Thanks Moy.

 

COMMLOGIK DO BRASIL LTDA

Gabriel Durante - Depto. Técnico

Av. Dr. Guilherme Dumont Villares, 824

Portal do Morumbi - São Paulo/SP/Brasil

Cep: 05640-001

55+11+5503-1011 r/135

 <mailto:manzini at commlogik.com.br> gabriel at commlogik.com.br

www.commlogik.com.br

 

From: asterisk-r2-bounces at lists.digium.com [mailto:asterisk-r2-bounces at lists.digium.com] On Behalf Of Gabriel Durante
Sent: sexta-feira, 16 de outubro de 2009 10:20
To: 'Moises Silva'
Cc: asterisk-r2 at lists.digium.com
Subject: Re: [asterisk-r2] Protocol error

 

After this protocol error we can´t receive calls.

The incoming calls are dropped after 1 ring sometimes.

On outgoing calls no problem´s yet.

 

Just for additional information, this costumer has a primary extension, 3100.

Sometimes when this extension try to transfer a call to another extension, this specific call hang-up.

I am trying to get a full log of this call and I will post on pastebin.

 

I am on openr2 channel now.

 

Thanks

Regards.

 

COMMLOGIK DO BRASIL LTDA

Gabriel Durante - Depto. Técnico

Av. Dr. Guilherme Dumont Villares, 824

Portal do Morumbi - São Paulo/SP/Brasil

Cep: 05640-001

55+11+5503-1011 r/135

 <mailto:manzini at commlogik.com.br> gabriel at commlogik.com.br

www.commlogik.com.br

 

From: Moises Silva [mailto:moises.silva at gmail.com] 
Sent: quinta-feira, 15 de outubro de 2009 17:26
To: gabriel at commlogik.com.br
Cc: asterisk-r2 at lists.digium.com
Subject: Re: [asterisk-r2] Protocol error

 

so after protocol error you cannot make more calls?

 

if that is the case, contact me on IRC in freenode at the openr2 channel and we can discuss how to fix it.

On Thu, Oct 15, 2009 at 2:10 PM, Gabriel Durante <gabriel at commlogik.com.br> wrote:

Hello Moy,

The same problem appears after uninstalling asterisk 1.6.0.6 with manual patch and upgrading to asterisk 1.6.2.0-rc3.

 

Thanks in advanced.

Regards.

 

COMMLOGIK DO BRASIL LTDA

Gabriel Durante - Depto. Técnico

Av. Dr. Guilherme Dumont Villares, 824

Portal do Morumbi - São Paulo/SP/Brasil

Cep: 05640-001

55+11+5503-1011 r/135

 <mailto:manzini at commlogik.com.br> gabriel at commlogik.com.br

www.commlogik.com.br

 

From: Moises Silva [mailto:moises.silva at gmail.com] 
Sent: quinta-feira, 15 de outubro de 2009 12:50


To: gabriel at commlogik.com.br

Subject: Re: [asterisk-r2] Protocol error

 

I will try to use asterisk 1.6.2.0-rc3 with embedded openr2 support but no promises, the last time that I’ve compiled without a manual patch I can´t see dahdi and mfcr2 on asterisk CLI (using Digium TE122/TE121).

I can assure you there is no problems with 1.6.2.0-rc3, give it a try. As I said a few weeks ago, I dropped support for 1.6.x previous to 1.6.2, is just too time consuming support so many releases and 1.6.2.0-rc3 should work pretty well.

 

If possible via advanced parameters,  allow the forward side to send 0x0C (clear back).

No, unfortunately that is not possible at this point.

 

-- 
Moises Silva
Software Developer
Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada
t. 1 905 474 1990 x 128 | e. moy at sangoma.com




-- 
Moises Silva
Software Developer
Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada
t. 1 905 474 1990 x 128 | e. moy at sangoma.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20091016/8753247b/attachment-0001.htm