[asterisk-r2] Don't see channels in openr2

[Moises Silva]

you forgot to add the channels parameter, how chan_dahdi is supposed
to know which dahdi devices to use?

channel=x-x

On Mon, Mar 23, 2009 at 8:06 PM, Carlos Rangel <crangeltpmex at hotmail.com> wrote:
>  Hello
> I installed Openr2 with patch in Asterisk 1.4.23 (Centos 5. 2) in a trixbox
> 2.6.2 machine
> following up the guide. These are the steps I followed:
>
> Installed dahdi-linux-2.1.0.4.
> cd dahdi-linux-2.1.0.4.
> make $ make install
>
> Installed dahdi-tools-2.1.0.2.
> cd dahdi-tools-2.1.0.0.
> ./configure –prefix=/usr
> make $ make install
>
>  Install openr2-1.1.0.tar in /usr/src
>  ./configure –prefix=/usr
>  make & make install
>
> Install automake
> Install autoconf 2.60
>
> Patch and Install asterisk
> patch -p0 < openr2-asterisk-1.4.23.patch
>
> Install automake (needed for  ./bootstrap.sh)
>
> ./bootstrap.sh
>
> Install asterisk
>  ./configure –prefix=/usr
>  make & make install
>
> configure /etc/dahdi/sys.conf with
>
>
> span=1,1,0,cas,hdb3
>
> cas=1-15:1101
>
> dchan=16
>
> cas=17-31:1101
>
> Everything run just fine  and when I run the command I see the right output
>
> #ldd channels/chan_dahdi.so | grep openr2
>   libopenr2.so.1 => /usr/lib/libopenr2.so.1 (0x00643000)
>
> However I cannot make calls. When I run the comand "mfcr2 show channels" in
> CLI I dont see the channels
>
> trixbox1*CLI>  mfcr2 show channels
> Chan Variant Max ANI Max DNIS ANI First Immediate Accept Tx CAS   Rx CAS
>
> This is my chan_dahdi.conf file. I am pretty new to openr2 so there are
> chances that I did not configure something correctly. I use Freepbx and the
> trunk is DAHDI/g1/$OUTNUM$ the E1 is from Telmex (MEXICO)
>
>  http://pastebin.com/m6ea672c5
>
> I appreciatte any help.
>
> Thanks
> CR
>
>
> ________________________________
> No olvides consultar tus correos desde la ventana principal de Messenger
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>



-- 
"I do not agree with what you have to say, but I’ll defend to the
death your right to say it." Voltaire