[asterisk-r2] chan_unicall.c: Unicall/X Alarm No Alarm raised, No Alarm cleared

Sat Mar 14 11:32:47 CDT 2009

Excuse me. This is the correct log: http://pastebin.com/f2b696d25

----- Original Message ----- 
From: "Giovanni Magallanes" <gmagallanes at gmail.com>
To: <asterisk-r2 at lists.digium.com>
Sent: Saturday, March 14, 2009 11:01 AM
Subject: [asterisk-r2] chan_unicall.c: Unicall/X Alarm No Alarm raised, No 
Alarm cleared

>
> Hi
>
> I have problems with my E1-R2. All calls are interrupted two/three minutes 
> each aprox.. This is the message that appears in the moment of event. 
> Please, Any idea???
>
> Thanks!!
>
>
> [Mar 14 10:40:20] NOTICE[3824] chan_unicall.c: Exception on 30, channel 23
> [Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/1 Alarm masks 
> 0x0000 0x0000
> [Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/1 Alarm No Alarm 
> raised, No Alarm cleared
> [Mar 14 10:40:20] NOTICE[3230] chan_unicall.c: Unicall/2 event Alarm
> [Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/2 Alarm masks 
> 0x0000 0x0000
> [Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/2 Alarm No Alarm 
> raised, No Alarm cleared
> [Mar 14 10:40:20] NOTICE[3230] chan_unicall.c: Unicall/3 event Alarm
> [Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/3 Alarm masks 
> 0x0000 0x0000
> [Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/3 Alarm No Alarm 
> raised, No Alarm cleared
> [Mar 14 10:40:20] NOTICE[3230] chan_unicall.c: Unicall/4 event Alarm
> [Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/4 Alarm masks 
> 0x0000 0x0000
> [Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/4 Alarm No Alarm 
> raised, No Alarm cleared
> ...
> ...
> ...
> [Mar 14 10:40:20] NOTICE[3230] chan_unicall.c: Unicall/14 event Alarm
> [Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/14 Alarm masks 
> 0x0000 0x0000
> [Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/14 Alarm No Alarm 
> raised, No Alarm cleared
> [Mar 14 10:40:20] NOTICE[3230] chan_unicall.c: Unicall/15 event Alarm
> [Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/15 Alarm masks 
> 0x0000 0x0000
> [Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/15 Alarm No Alarm 
> raised, No Alarm cleared
> [Mar 14 10:40:20] NOTICE[3230] chan_unicall.c: Unicall/17 event Alarm
> [Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/17 Alarm masks 
> 0x0000 0x0000
> [Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/17 Alarm No Alarm 
> raised, No Alarm cleared
> [Mar 14 10:40:20] NOTICE[3230] chan_unicall.c: Unicall/18 event Alarm
> [Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/18 Alarm masks 
> 0x0000 0x0000
> [Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/18 Alarm No Alarm 
> raised, No Alarm cleared
> ...
> ...
> ...
> [Mar 14 10:40:20] NOTICE[3230] chan_unicall.c: Unicall/28 event Alarm
> [Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/28 Alarm masks 
> 0x0000 0x0000
> [Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/28 Alarm No Alarm 
> raised, No Alarm cleared
> [Mar 14 10:40:20] NOTICE[3230] chan_unicall.c: Unicall/29 event Alarm
> [Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/29 Alarm masks 
> 0x0000 0x0000
> [Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/29 Alarm No Alarm 
> raised, No Alarm cleared
> [Mar 14 10:40:20] NOTICE[3230] chan_unicall.c: Unicall/30 event Alarm
> [Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/30 Alarm masks 
> 0x0000 0x0000
> [Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/30 Alarm No Alarm 
> raised, No Alarm cleared
> [Mar 14 10:40:20] NOTICE[3230] chan_unicall.c: Unicall/31 event Alarm
> [Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/31 Alarm masks 
> 0x0000 0x0000
> [Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/31 Alarm No Alarm 
> raised, No Alarm cleared
>
>
>
> ----- Original Message ----- 
> From: "Moises Silva" <moises.silva at gmail.com>
> To: <asterisk-r2 at lists.digium.com>
> Sent: Thursday, March 12, 2009 4:32 PM
> Subject: Re: [asterisk-r2] collect calls
>
>
>> You can use ${MFCR2_CATEGORY} in your dial plan if the telco sends a
>> special category for collect calls (I assume it does since
>> mfcr2_allow_collect_calls=no worked for you), and then hangup the call
>> if the category is for collect call. However I had a report that this
>> variable sometimes comes up empty, its a known bug and I expect to fix
>> it this week.
>>
>> Please stay tunned, I may even fix it today and put it up in the
>> release branch tonight before doing the release next week.
>>
>> Moy
>>
>> On Thu, Mar 12, 2009 at 5:26 PM, Marcus Vinicius
>> <marc_mcs10 at yahoo.com.br> wrote:
>>> Hi,
>>>
>>> I have a link r2d from Brazil.
>>>
>>> I can make blocking calls using the policy in mfcr2_allow_collect_calls 
>>> = no
>>>
>>> There are some openr2 application at asterisk to do the same lock?
>>> Or some variable in the dialplan to lock non global form?
>>>
>>>
>>> Tks
>>>
>>> --
>>> Marcus Vinícius
>>> ________________________________
>>> Veja quais são os assuntos do momento no Yahoo! + Buscados: Top 10 -
>>> Celebridades - Música - Esportes
>>> _______________________________________________
>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>
>>> asterisk-r2 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>
>>
>>
>>
>> -- 
>> "I do not agree with what you have to say, but I’ll defend to the
>> death your right to say it." Voltaire
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
> 