[asterisk-r2] chan_unicall.c: Unicall/X Alarm No Alarm raised, No Alarm cleared

[Giovanni Magallanes]

Hi

I have problems with my E1-R2. All calls are interrupted two/three minutes 
each aprox.. This is the message that appears in the moment of event. 
Please, Any idea???

Thanks!!


[Mar 14 10:40:20] NOTICE[3824] chan_unicall.c: Exception on 30, channel 23
[Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/1 Alarm masks 0x0000 
0x0000
[Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/1 Alarm No Alarm 
raised, No Alarm cleared
[Mar 14 10:40:20] NOTICE[3230] chan_unicall.c: Unicall/2 event Alarm
[Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/2 Alarm masks 0x0000 
0x0000
[Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/2 Alarm No Alarm 
raised, No Alarm cleared
[Mar 14 10:40:20] NOTICE[3230] chan_unicall.c: Unicall/3 event Alarm
[Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/3 Alarm masks 0x0000 
0x0000
[Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/3 Alarm No Alarm 
raised, No Alarm cleared
[Mar 14 10:40:20] NOTICE[3230] chan_unicall.c: Unicall/4 event Alarm
[Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/4 Alarm masks 0x0000 
0x0000
[Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/4 Alarm No Alarm 
raised, No Alarm cleared
...
...
...
[Mar 14 10:40:20] NOTICE[3230] chan_unicall.c: Unicall/14 event Alarm
[Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/14 Alarm masks 
0x0000 0x0000
[Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/14 Alarm No Alarm 
raised, No Alarm cleared
[Mar 14 10:40:20] NOTICE[3230] chan_unicall.c: Unicall/15 event Alarm
[Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/15 Alarm masks 
0x0000 0x0000
[Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/15 Alarm No Alarm 
raised, No Alarm cleared
[Mar 14 10:40:20] NOTICE[3230] chan_unicall.c: Unicall/17 event Alarm
[Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/17 Alarm masks 
0x0000 0x0000
[Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/17 Alarm No Alarm 
raised, No Alarm cleared
[Mar 14 10:40:20] NOTICE[3230] chan_unicall.c: Unicall/18 event Alarm
[Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/18 Alarm masks 
0x0000 0x0000
[Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/18 Alarm No Alarm 
raised, No Alarm cleared
...
...
...
[Mar 14 10:40:20] NOTICE[3230] chan_unicall.c: Unicall/28 event Alarm
[Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/28 Alarm masks 
0x0000 0x0000
[Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/28 Alarm No Alarm 
raised, No Alarm cleared
[Mar 14 10:40:20] NOTICE[3230] chan_unicall.c: Unicall/29 event Alarm
[Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/29 Alarm masks 
0x0000 0x0000
[Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/29 Alarm No Alarm 
raised, No Alarm cleared
[Mar 14 10:40:20] NOTICE[3230] chan_unicall.c: Unicall/30 event Alarm
[Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/30 Alarm masks 
0x0000 0x0000
[Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/30 Alarm No Alarm 
raised, No Alarm cleared
[Mar 14 10:40:20] NOTICE[3230] chan_unicall.c: Unicall/31 event Alarm
[Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/31 Alarm masks 
0x0000 0x0000
[Mar 14 10:40:20] WARNING[3230] chan_unicall.c: Unicall/31 Alarm No Alarm 
raised, No Alarm cleared



----- Original Message ----- 
From: "Moises Silva" <moises.silva at gmail.com>
To: <asterisk-r2 at lists.digium.com>
Sent: Thursday, March 12, 2009 4:32 PM
Subject: Re: [asterisk-r2] collect calls


> You can use ${MFCR2_CATEGORY} in your dial plan if the telco sends a
> special category for collect calls (I assume it does since
> mfcr2_allow_collect_calls=no worked for you), and then hangup the call
> if the category is for collect call. However I had a report that this
> variable sometimes comes up empty, its a known bug and I expect to fix
> it this week.
>
> Please stay tunned, I may even fix it today and put it up in the
> release branch tonight before doing the release next week.
>
> Moy
>
> On Thu, Mar 12, 2009 at 5:26 PM, Marcus Vinicius
> <marc_mcs10 at yahoo.com.br> wrote:
>> Hi,
>>
>> I have a link r2d from Brazil.
>>
>> I can make blocking calls using the policy in mfcr2_allow_collect_calls = 
>> no
>>
>> There are some openr2 application at asterisk to do the same lock?
>> Or some variable in the dialplan to lock non global form?
>>
>>
>> Tks
>>
>> --
>> Marcus Vinícius
>> ________________________________
>> Veja quais são os assuntos do momento no Yahoo! + Buscados: Top 10 -
>> Celebridades - Música - Esportes
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>
>
>
>
> -- 
> "I do not agree with what you have to say, but I’ll defend to the
> death your right to say it." Voltaire
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2