[asterisk-r2] Problem MFC R2 - Telco Messages

[Giovanni Magallanes]

Yes, is too necessary. Because, end-users can think that is a PBX problem 
and not a Telco/PSTN/subscriber issue.

Thanks!

Giovanni Magallanes

----- Original Message ----- 
From: "Moises Silva" <moises.silva at gmail.com>
To: <asterisk-r2 at lists.digium.com>
Sent: Tuesday, March 03, 2009 3:07 PM
Subject: Re: [asterisk-r2] Problem MFC R2 - Telco Messages


> Oh, I forgot you were using Unicall and not openr2. I don't think
> unicall is capable yet of doing that, since the call is accepted right
> away. A fix would be needed in the channel driver.
>
> On Tue, Mar 3, 2009 at 3:04 PM, Giovanni Magallanes
> <gmagallanes at gmail.com> wrote:
>> Thanks!
>>
>> The feature is not available.
>>
>> elastix*CLI> UC show channel 1
>> Channel: 1I>
>> File descriptor: 9
>> Group: 1
>> Extension: 9260
>> Context: ivr-2
>> Destroy: 0
>> Signalling type: mfcr2
>> Signalling variant: mx,0,4,7
>> Signalling end: CPE
>> Owner: UniCall/1-1
>> Real: UniCall/1-1
>> Callwait: <None>
>> Threeway: <None>
>> Confno: -1
>> Propagated conference: -1
>> Real in conference: 0
>> Dialing: 0
>> Default law: unknown
>> Fax handled: no
>> UniCall flags: Call
>> elastix*CLI>
>>
>>
>> Regards,
>>
>> GM
>> - Show quoted text -
>> ----- Original Message -----
>> From: "Moises Silva" <moises.silva at gmail.com>
>> To: <asterisk-r2 at lists.digium.com>
>> Sent: Tuesday, March 03, 2009 2:37 PM
>> Subject: Re: [asterisk-r2] Problem MFC R2 - Telco Messages
>>
>>
>>> mfcr2_accept_on_offer=no
>>>
>>> However, that feature may not be available in the Asterisk patches in
>>> google code. Just using mfcr2-1.4 SVN branch.
>>>
>>> To verify if the feature is available:
>>>
>>> dahdi show channel 1 (assuming channel 1 is valid and is an MFC/R2
>>> channel), if the feature is available then you should see the value:
>>>
>>> MFC/R2 Accept On Offer: Yes
>>>
>>> If that line is missing it means the feature is not available and that
>>> you should install mfcr2-1.4 or wait for a patch to come up.
>>>
>>> On Tue, Mar 3, 2009 at 2:31 PM, Giovanni Magallanes
>>> <gmagallanes at gmail.com> wrote:
>>>> Hi Guys,
>>>>
>>>> How can I to pass through messages from Telco (busy, out of service, 
>>>> ...)
>>>> to
>>>> my PBX Asterisk with E1-R2.
>>>> If, I make a call and the target phone is busy then I hear a 
>>>> unavailable
>>>> message always, for this and another causes.
>>>>
>>>> Regards,
>>>>
>>>> Giovanni Magallanes
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>
>>>> asterisk-r2 mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>
>>>
>>>
>>>
>>> --
>>> "I do not agree with what you have to say, but I’ll defend to the
>>> death your right to say it." Voltaire
>>>
>>> _______________________________________________
>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>
>>> asterisk-r2 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>
>
>
> -- 
> "I do not agree with what you have to say, but I’ll defend to the
> death your right to say it." Voltaire
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2