[asterisk-r2] Problem MFC R2 - Telco Messages

[Moises Silva]

mfcr2_accept_on_offer=no

However, that feature may not be available in the Asterisk patches in
google code. Just using mfcr2-1.4 SVN branch.

To verify if the feature is available:

dahdi show channel 1 (assuming channel 1 is valid and is an MFC/R2
channel), if the feature is available then you should see the value:

MFC/R2 Accept On Offer: Yes

If that line is missing it means the feature is not available and that
you should install mfcr2-1.4 or wait for a patch to come up.

On Tue, Mar 3, 2009 at 2:31 PM, Giovanni Magallanes
<gmagallanes at gmail.com> wrote:
> Hi Guys,
>
> How can I to pass through messages from Telco (busy, out of service, ...) to
> my PBX Asterisk with E1-R2.
> If, I make a call and the target phone is busy then I hear a unavailable
> message always, for this and another causes.
>
> Regards,
>
> Giovanni Magallanes
>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>



-- 
"I do not agree with what you have to say, but I’ll defend to the
death your right to say it." Voltaire