[asterisk-r2] R2 Inbound Call does not work

[Alejandro Fuentes G.]

 Hi everyone,   
 I just installed and asterisk box with Sangoma A101 card and MFCR2
working with Maxcom   
 The outbound calls is working fine, but the inbound calls does not
work, and i do not seen any signal in the CLI for the inbound call  

  The configurations files are:  

  dahdi system.conf  

 loadzone=us
 defaultzone=us
 #Sangoma A101 port 1 [slot:8 bus:1 span:1] 
 span=1,1,0,cas,hdb3,crc4
 cas=1-10:1101  
  chan_dahdi.conf  

 echocancel=yes
 group=0
 context=e1-incoming
 signalling =mfcr2
 mfcr2_variant=mx
 mfcr2_get_ani_first=no
 mfcr2_max_ani=10
 mfcr2_max_dnis=7
 mfcr2_category=national_subscriber
 mfcr2_logdir=span1
 mfcr2_call_files=yes
 mfcr2_logging=all
 mfcr2_mfback_timeout=-1
 mfcr2_metering_pulse_timeout=-1
 mfcr2_allow_collect_calls=no
 mfcr2_double_answer=no
 mfcr2_forced_release=no
 mfcr2_charge_calls=yes
 channel => 1-10
 Thanks a lot  
 AFG  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20090612/5f9e128c/attachment.htm