[asterisk-r2] zaptel.h header not found openr2 ./configure

[Dennis Sheridan]

DIGIUM WILDCARD TE122

Hello I have a fresh install of trixbox 2.6.2.2  and im trying to setup my
E1 lines (mexico)
on my DIGIUM WILDCARD TE122  card

I have managed to configured the hardware correctly
I get no errors from the card on zttool everythings OK

here is my zaptel.conf

span=1,1,0,cas,hdb3
cas=1-15:1101
dchan=16
cas=17-31:1101


but im running into a problem when i try to install / configure the OpenR2
library

wget http://openr2.googlecode.com/files/openr2-1.0.0.tar.gz

tar -xzf openr2-1.0.0.tar.gz
# cd openr2
# ./configure --prefix=/usr

And i get the following errors:

cannot find: zaptel.h header

Also i have noticed that when i run the asterisk -r 'show zap channels'
i get: No such command 'show zap channels'

thanks


-- 
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Ing. Dennis Sheridan Plasencia
- Consultor de tecnologías

www.oseocreativo.com

-Arquitectura - Diseño Interiores - Diseño Gráfico - Paginas Web - Sistemas
- Consultoría IT-

Tel: (33) 3817-2089 Ext. 110 ||| Tel: (33) 1199-5794 / 95  ||| Fax:  (33)
3817-2088 directo ||| Móvil: (33) 3157-8127 ||| US: (949) 608-9716

- The information contained in this message may be privileged and
confidential. It is intended to be read only by the individual or entity to
whom it is addressed or by their designee. If the reader of this message is
not the intended recipient, you are on notice that any distribution of this
message, in any form, is strictly prohibited. If you have received this
message in error, please immediately notify the sender and delete or destroy
any copy of this message.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20090728/442d0b9c/attachment.htm