[asterisk-r2] Problems with Astunicall for Asterisk 1.4.21.2

[Carlos Rangel]

Hi Moy
I just found that I missed the last step of installing the chan_unicall.so driver from your README file, which I belive was a step not needed in past versions. I installed it and now I can see the channels created. Asterisk is still not running but It is jus a matter of adjusting conf. files. I shouldn't have more problems from now. Thank you very much for your help.
 
Best Regards
CR> Date: Thu, 22 Jan 2009 22:41:23 -0600> From: moises.silva at gmail.com> To: asterisk-r2 at lists.digium.com> Subject: Re: [asterisk-r2] Problems with Astunicall for Asterisk 1.4.21.2> > Be sure all console messages are enabled in /etc/asterisk/logger.conf,> then start asterisk like this:> > asterisk -vvvvvvvvvvvvvvvvvvc> > and load chan_unicall.so> > If the Unicall module fails to load, Asterisk will show a message. If> you don't have uc commands is because the module is not loaded, that> is really the only cause.> > Moy> > > On Thu, Jan 22, 2009 at 5:51 PM, Carlos Rangel <crangeltpmex at hotmail.com> wrote:> > Thanks for your response Moy.> >> > I did not get any errors when loading the module, however the uotput is> > exactly the same, no unicall channels are available. Debugg messgaes are> > exactly the same. Call cannot be initiated.> >> > Regards> > CR> >> >> Date: Thu, 22 Jan 2009 18:33:03 -0500> >> From: moises.silva at gmail.com> >> To: asterisk-r2 at lists.digium.com> >> Subject: Re: [asterisk-r2] Problems with Astunicall for Asterisk 1.4.21.2> >>> >> The unicall module is not loaded, or failed to load.> >>> >> try executing> >>> >> CLI> module load chan_unicall.so> >>> >> If there are errors when loading pastebin them as well. If no errors,> >> then you should be ready to go.> >>> >> Moy> >>> >> On Thu, Jan 22, 2009 at 6:13 PM, Carlos Rangel <crangeltpmex at hotmail.com>> >> wrote:> >> > Hello> >> > I installed the astunicall 1.4.21 package from Moises Silva to support> >> > MFCR2> >> > signalling on a TE122P. I use trixbox 2.1.13 in a dell optiplex 755 dual> >> > core with 4 GB of ram. I am in Mexico and use an E1 from Telmex. I> >> > haven't> >> > been able to make calls yet though. It seems from debugging that Unicall> >> > channels are not being created for some reason. Has anyone been able to> >> > install this version and make it work?? I have other similar system with> >> > the> >> > package 1.4.18 working with no problems. The process followed was:> >> >> >> > - Install trixbox 2.1.13> >> > Astunicall 1.4.21> >> > - Compile zaptel 1.4.11 and all dependencies> >> > - Compile spandsp-0.0.5> >> > - Compile libsupertone-0.0.2> >> > - Compile libunicall-0.0.6> >> > - Compile libmfcr2-0.0.6> >> > - Compile Asterisk 1.4.21> >> > - Copy Unicall.conf to hte Asterisk directory> >> > - Configure zaptel.conf and zapata.conf> >> >> >> > Evrything compiles just right, however no unicall channesl are> >> > available.> >> > One thing I noticed is that on the console help commands the uniicall> >> > commands are not available nor the channels.> >> >> >> > UC debug span Enables UC debugging on a span> >> > UC destroy channel Destroy a channel> >> > UC no debug span Disables UC debugging on a span> >> > UC show channels Show active UniCall channels> >> > UC show channel Show information on a channel> >> >> >> >> >> > I have posted debbug messages and config files in pastemin.com as> >> > follows> >> >> >> > http://pastebin.com/m5e5d554 debug messages> >> > http://pastebin.com/m11a8f59 console output> >> > http://pastebin.com/m70df3cca zaptel.conf> >> > http://pastebin.com/m59974013 zapata.conf> >> > http://pastebin.com/d67147a6d unicall.conf> >> >> >> > I appreciatte any help on this.> >> >> >> > Thanks> >> > crangeltpmex> >> >> >> >> >> >> >> >> >> > ________________________________> >> > Con Hotmail tienes acceso a múltiples cuentas de mail desde una bandeja> >> > de> >> > entrada.> >> > _______________________________________________> >> > --Bandwidth and Colocation Provided by http://www.api-digital.com--> >> >> >> > asterisk-r2 mailing list> >> > To UNSUBSCRIBE or update options visit:> >> > http://lists.digium.com/mailman/listinfo/asterisk-r2> >> >> >>> >>> >>> >> --> >> "I do not agree with what you have to say, but I'll defend to the> >> death your right to say it." Voltaire> >>> >> _______________________________________________> >> --Bandwidth and Colocation Provided by http://www.api-digital.com--> >>> >> asterisk-r2 mailing list> >> To UNSUBSCRIBE or update options visit:> >> http://lists.digium.com/mailman/listinfo/asterisk-r2> >> >> > ________________________________> > Con Hotmail tienes acceso a múltiples cuentas de mail desde una bandeja de> > entrada.> > _______________________________________________> > --Bandwidth and Colocation Provided by http://www.api-digital.com--> >> > asterisk-r2 mailing list> > To UNSUBSCRIBE or update options visit:> > http://lists.digium.com/mailman/listinfo/asterisk-r2> >> > > > -- > "I do not agree with what you have to say, but I'll defend to the> death your right to say it." Voltaire> > _______________________________________________> --Bandwidth and Colocation Provided by http://www.api-digital.com--> > asterisk-r2 mailing list> To UNSUBSCRIBE or update options visit:> http://lists.digium.com/mailman/listinfo/asterisk-r2
_________________________________________________________________
Personaliza Messenger como tú quieras.
http://download.live.com/messenger
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20090123/bd0310db/attachment.htm