[asterisk-r2] Asterisk 1.6.2 is out - oficial MFC/R2 release

[Luc Moreira]

Anton

As Moy said, yes, I use
OpenR2 1.2.0 + Asterisk (1.2.x/1.4.x) + Dahdi 2.2.0.2 (or Zaptel for
Asterisk 1.2.x) + FoneBridge.
OpenR2 is needful to implement MFCR2 for Asterisk. Install sequence:
Dahdi => OpenR2 => Asterisk Patched for mfcr2.

Luc

2009/12/21 Anton Krall <antonkrall at gmail.com>:
> Luc
>
> 1. when it happens, can you still get outbound calls?
> 2. I have been having problems with 3 diff. Telcos so I dont think its the
> telco alone.
> 3. hows the fonebridge working out for you? Are you using mfcr2 with your
> fonebridge? If using the fonebridge, do you still need to use openr2, I
> guess not correct?
>
>
>> From: Luc Moreira <lmoreira at dxbrasil.net>
>> Reply-To: <asterisk-r2 at lists.digium.com>
>> Date: Mon, 21 Dec 2009 08:15:35 -0300
>> To: <asterisk-r2 at lists.digium.com>
>> Subject: Re: [asterisk-r2] Asterisk 1.6.2 is out - oficial MFC/R2 release
>>
>> 2009/12/21 Anton Krall <antonkrall at gmail.com>:
>>> What I did was to remove wanpipe from the equation, using a digium card,
>>> lastest zaptel, lastest asterisk 1.4 and Im still getting seize timeouts,
>>> they first show up on certain channels and then you get it on all of them
>>> and no call go out.. Call can come in but not out, you need to restart
>>> asterisk and zaptel in order to get calls out again...
>>
>> Anton,
>>
>> Something is really broken somewhere between your PBX and telco.
>> I have a lot of boxes with this scenario using OpenR2:
>> Asterisk1.4.x-digium-telco or Asterisk1.2x-fonebridge-telco and seize
>> timeouts happens only by telco side fault. When it happens I never had
>> to restart asterisk.
>>
>> Luc
>>
>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>