[asterisk-r2] R2 over microwave

[Anton Krall]

Gounding is ok and cabling too...  The telco says everything looks ok on
their side... The media is ok according to them.... :(


> From: Vinícius Fontes <vinicius at canall.com.br>
> Reply-To: <asterisk-r2 at lists.digium.com>
> Date: Mon, 14 Dec 2009 16:00:40 -0300 (GMT-03:00)
> To: <asterisk-r2 at lists.digium.com>
> Subject: Re: [asterisk-r2] R2 over microwave
> 
> Asterisk and all other PBXs are completely agnostic on how the media used by
> the E1/T1 link.
> 
> This is most likely a telco or equipment installed at the CPE issue. Check the
> cabling and grounding. If nothing of this helps, open a ticket with the telco
> tech support.
> 
> 
> 
> 
> Vinícius Fontes
> www.asteriskforum.com.br - Informações e discussão sobre Asterisk e telefonia
> IP
> 
> 
> 
> 
> 
> ----- "Anton Krall" <antonkrall at gmail.com> escreveu:
> 
>> Has anybody had problemas or maybe not problems but has anybody seen
>> red
>> alarms from time to time with R2 over microwave links? My carrier is
>> alestra
>> in Mexico and from time to time I get a sudden red alarm on all
>> channels and
>> its gets cleared right away... As if the link was broken for a minute
>> (the
>> microwave one)
>> 
>> Anybody seend this? Any config changes in zaptel that need to be
>> done?
>> Clock? (mine is setup as slave right now) or maybe the other parameter
>> where
>> to put the db in zaptel?
>> 
>> Thx guys!
>> 
>> 
>> 
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>> 
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-r2
> 
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> 
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-r2