[asterisk-r2] Urgente seize timeout
OrvUx
orvux at orvux.net
Thu Dec 3 13:27:59 CST 2009
Hi guys, sorry for my question but, what happened with this problem? Mr.
Anton Krall did you resolved it? I have a server with the same problem,
i will appreciate if you can post your solution.
Thanks.
--
Orvil Juarez
IT Manager
J&A Consulting
http://www.jacons.net
On Wed, 2009-08-05 at 00:08 -0500, Anton Krall wrote:
> Moises
>
> I did the tests today.... The scenario is this:
> Wanpipe 3.3.15 and 3.4.2.4
>
> On 3.4.2.4 I went into zttool and as soon as the prolems started all
> E1 channels seems to have gone down.. Zttool shows 1001 on RX and TX
> and no calls could go in and out, the logs shows no errors regarding
> sangoma but on openr2 they showd this:
>
> chan-3-forward-1-20090804094726.call:[09:47:34:384] [Thread: 13544352]
> [Chan 3] - Protocol error. Reason = Seize Timeout, R2 State = Seize
> Transmitted, MF state = MF Engine Off, MF Group = Forward MF init, CAS
> = 0x08
>
> On all channels...
>
> So I restart just asterisk.... Everything stayed the same.. No call
> could go in and out and zttool showd rx 1001 and tx 1001
>
> So I turned asterisk off again and then I did a wanrouter restart...
> Restarted asterisk and everything was back to normal.
>
> This leads me to believe that something between wanpipe and openr2 or
> asterisk is bad...
>
> Tonight Im going to upgrade to openr2 1.2 rc1 and wanpipe 3.5.4 to see
> if this helps... Tomorrow Ill run the same tests and report back.
>
>
>
> ______________________________________________________________________
> From: Moises Silva <moises.silva at gmail.com>
> Reply-To: <asterisk-r2 at lists.digium.com>
> Date: Tue, 4 Aug 2009 01:17:30 -0400
> To: <asterisk-r2 at lists.digium.com>
> Subject: Re: [asterisk-r2] Urgente seize timeout
>
> the next time you see the issue, take a look at zttool or dahdi_tool,
> when you select the span you will see the ABCD bits, check if the tx
> bits on the channel you are trying to make a call are set to 0001
> (that is a seize) and see if the rx bits in the same channel are
> anything different than 1001, that would let us know if the problem is
> in openr2 at all or not. I dont think the problem is in openr2 though.
>
> Ideally as well, I should be able to get access to the box in question
> when the problem occurs. Which wanpipe driver version are you using?
>
> Try with 3.5.4 if you are using 3.4.4, or try 3.5.4 if you are using
> 3.4.4, that is, just switch the versions to see if that helps.
>
> On Tue, Aug 4, 2009 at 1:04 AM, Anton Krall <akrall at intruder.com.mx>
> wrote:
>
> No errors regarding wanpipe on /var/log/messages
>
>
>
>
> ______________________________________________________________
> From: Moises Silva <moises.silva at gmail.com
> <http://moises.silva@gmail.com> >
> Reply-To: <asterisk-r2 at lists.digium.com
> <http://asterisk-r2@lists.digium.com> >
> Date: Tue, 4 Aug 2009 00:22:31 -0400
>
> To: <asterisk-r2 at lists.digium.com
> <http://asterisk-r2@lists.digium.com> >
> Subject: Re: [asterisk-r2] Urgente seize timeout
>
> Did you try to look for errors in /var/log/messages ? if this
> is driver related you may see errors there
>
> On Mon, Aug 3, 2009 at 11:41 PM, Anton Krall
> <akrall at intruder.com.mx <http://akrall@intruder.com.mx> >
> wrote:
>
> The line is working... When this happens... I need to
> restart wanpipe and asterisk and everthing is back to
> nromal for some time.... Weird thing is, this didnt
> happen with openr2 and digium cards.. Started when I
> exchanged the card for a sangoma... And I think it is
> software related because after restarting wanpipe and
> asterisk, everthing goes back to normal for some
> time...
>
>
>
> ______________________________________________________
> From: Moises Silva <moises.silva at gmail.com
> <http://moises.silva@gmail.com>
> <http://moises.silva@gmail.com> >
>
> Reply-To: <asterisk-r2 at lists.digium.com
> <http://asterisk-r2@lists.digium.com>
> <http://asterisk-r2@lists.digium.com> >
>
> Date: Mon, 3 Aug 2009 11:42:09 -0400
>
> To: <asterisk-r2 at lists.digium.com
> <http://asterisk-r2@lists.digium.com>
> <http://asterisk-r2@lists.digium.com> >
>
> Subject: Re: [asterisk-r2] Urgente seize timeout
>
>
> On Fri, Jul 31, 2009 at 3:38 PM, Anton Krall
> <akrall at intruder.com.mx
> <http://akrall@intruder.com.mx>
> <http://akrall@intruder.com.mx> > wrote:
>
> Ah! For got to add.. Weird thing is, its the
> same E1 as before, we just
> upgraded a digium e1 card to a sangoma one
> with wanpipe now... Could it be
> wanpipe related?
>
>
> Should not be an issue, I have been using wanpipe
> since I started the development of openr2 since
> Sangoma sent me my first boards to test. The seize
> timeout simply means the other end did not change the
> ABCD bits to reply our initial message, may be your rx
> CAS signaling is not working at all or the telco
> disabled the line?
>
> --
> Moises Silva
> Software Developer
> Sangoma Technologies Inc. | 50 McIntosh Drive, Suite
> 120, Markham ON L3R 9T3 Canada
> t. 1 905 474 1990 x 128 | e. moy at sangoma.com
> <http://moy@sangoma.com> <http://moy@sangoma.com>
>
>
> ______________________________________________________
> _______________________________________________
> --Bandwidth and Colocation Provided by
> http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-r2
>
> _______________________________________________
> --Bandwidth and Colocation Provided by
> http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>
> http://lists.digium.com/mailman/listinfo/asterisk-r2
>
>
>
>
> --
> Moises Silva
> Software Developer
> Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120,
> Markham ON L3R 9T3 Canada
> t. 1 905 474 1990 x 128 | e. moy at sangoma.com
> <http://moy@sangoma.com>
>
>
> ______________________________________________________________
> _______________________________________________
> --Bandwidth and Colocation Provided by
> http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-r2
>
> _______________________________________________
> --Bandwidth and Colocation Provided by
> http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-r2
>
>
>
>
> --
> Moises Silva
> Software Developer
> Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON
> L3R 9T3 Canada
> t. 1 905 474 1990 x 128 | e. moy at sangoma.com
>
>
> ______________________________________________________________________
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-r2
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-r2
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20091203/aacc86c1/attachment-0001.htm
More information about the asterisk-r2
mailing list