[asterisk-r2] What this mean?

[Ricardo Melendez]

Hi to all, I hope you can help me.

 

I have this scenario, Asterisk + OpenR2 + chan_dahdi with Digium Card with 2
E1 only one configured.

 

Alarms are OK, and "mfcr2 show channels" shows the correct output and "dahdi
show channels" show the expected output, but not receiving incoming or
outgoing calls, 

In outgoing I receive Busy/Congested.

In incoming I receive the following:

 

[Aug 19 17:41:09] NOTICE[6071]: chan_dahdi.c:1296 dahdi_r2_on_call_init: New
MFC/R2 call detected on chan 7.

[Aug 19 17:41:23] NOTICE[6071]: chan_dahdi.c:1515 dahdi_r2_write_log: Chan 7
- Far end disconnected. Reason: Normal Clearing

[Aug 19 17:41:23] NOTICE[6071]: chan_dahdi.c:1472
dahdi_r2_on_call_disconnect: MFC/R2 call disconnected on chan 7

[Aug 19 17:41:23] NOTICE[6071]: chan_dahdi.c:1383 dahdi_r2_on_call_end:
MFC/R2 call end on chan 7

 

And this is one call file:

 

[17:26:47:271] [Thread: 1104300352] [Chan 2] - Call started at Wed Aug 19
17:26:47 2009 on chan 2

[17:26:47:271] [Thread: 1104300352] [Chan 2] - CAS Tx >> [SEIZE ACK] 0x0C

[17:26:47:271] [Thread: 1104300352] [Chan 2] - CAS Raw Tx >> 0x0D

[17:27:01:356] [Thread: 1104300352] [Chan 2] - Bits changed from 0x00 to
0x08

[17:27:01:356] [Thread: 1104300352] [Chan 2] - CAS Rx << [CLEAR FORWARD]
0x08

[17:27:01:356] [Thread: 1104300352] [Chan 2] - Far end disconnected. Reason:
Normal Clearing

[17:27:01:356] [Thread: 1104300352] [Chan 2] - Call ended

[17:27:01:356] [Thread: 1104300352] [Chan 2] - Attempting to cancel timer
timer 0

[17:27:01:356] [Thread: 1104300352] [Chan 2] - Cannot cancel timer 0

 

If I understand, the message is that the far end (Telco) change the bits to
0x08 and then the call end.

 

Can it be asterisk configuration or telco problem?

 

Thanks for any help.

 

Ricardo

 

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20090819/b0182685/attachment.htm