[asterisk-r2] ChanIsAvail locking R2 channel

[Rafael Prado Rocchi]

Hi, 
We are having problems with chanisavail.

Everytime we use chanisavail to check for channel availability, when using R2, the channel gets locked.
We tested with 1.4.22, 1.4.24 and 1.4.26, using OpenR2 release 209.

Chanisavail works fine if the E1 is ISDN
But chanisavail gives error and locks the channel if we configure the E1 as R2. Next run, it locks the second available channel and so, until we get all 30 channels locked. Then we have to restart.


All other applications and the asterisk itself is working fine with R2



Can anyone please test this and confirm this problem?



Here is a simple dialplan for testing:


exten => 123,1,noop( ---- TESTE CHANISVAIL ---- )
exten => 123,n,CHANISAVAIL(dahdi/g1)
exten => 123,n,NOOP(CHAN=${AVAILCHAN})
exten => 123,n,SET(CHAN=${CUT(AVAILCHAN||1)})
exten => 123,n,DIAL(${CHAN}/1234)
exten => 123,n,NOOP( STATUS = ${DIALSTATUS})



Thanks in advance,

Rafael Prado


PRACTIS - Comunicação & Tecnologia 
Av Aquidaban, 766 - Conj 51        
CEP 13026-510, Campinas/SP - Brasil
http://www.practis.com.br


This message and any archive transmited may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. Any views or opinions expressed in this email are solely those of the author and might not represent those of Practis. Although reasonable precautions have been taken by Practis to ensure no viruses are present in this email, the company cannot accept responsability for any loss or damage arising from the use of this email or it's attachments. Thank you for your cooperation.