[asterisk-r2] Problem MFC R2 - Telco Messages

[Faustino Méndez]

dial the same number over an analog line and listen the message from telco saying that doesn't exist.

I will be read the help for mfcr2_call_files=yes, and send you the log, thanks for the help


>  -------Original Message-------
>  From: Moises Silva <moises.silva at gmail.com>
>  Subject: Re: [asterisk-r2] Problem MFC R2 - Telco Messages
>  Sent: 07 Aug '09 09:43
>  
>  On Thu, Aug 6, 2009 at 10:49 PM, Faustino Méndez <[LINK:
>  mailto:faustinomendez at sivoz.com] faustinomendez at sivoz.com> wrote:
>  I have this output when call to number that does not exist
>  
>  Aug  6 21:20:28 NOTICE[5944]: chan_zap.c:1589 zt_r2_write_log: Chan 1 -
>  Far end disconnected. Reason: No Answer
>  Aug  6 21:20:28 NOTICE[5944]: chan_zap.c:1546 zt_r2_on_call_disconnect:
>  MFC/R2 call disconnected on chan 1
>     -- Zap/1-1 is circuit-busy
>     -- Hungup 'Zap/1-1'
>   == Everyone is busy/congested at this time (1:0/1/0)
>     -- Executing NoOp("SIP/4554-0982e580", "Hangupcause:0") in new
>  stack
>     -- Executing Congestion("SIP/4554-0982e580", "") in new stack
>  
>  but the Hangup instruction take like 20 seconds and is too much time.
>  Thanks for the help
>  
>  
>  That does not seem to be a number that does not exists, but rather a
>  number that did not answer (Far end disconnected. Reason: No Answer).
>  
>  
>  Can you elaborate on how do you know the number does not exists and paste
>  a full .call file log (read the help for mfcr2_call_files=yes)??
>  
>  --
>  Moises Silva
>  Software Developer
>  Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R
>  9T3 Canada
>  t. 1 905 474 1990 x 128 | e. [LINK: mailto:moy at sangoma.com]
>  moy at sangoma.com