[asterisk-r2] No outgoing or incoming calls using Elastix 1.5.2. Perhaps a timing issue

[Anton Krall]

Gerardo

Are there any alarms on the card? Is the light on the back of the card green
or yellow?



From: Gerardo Barajas <gerardo.barajas at gmail.com>
Reply-To: <asterisk-r2 at lists.digium.com>
Date: Tue, 4 Aug 2009 20:42:01 -0500
To: <asterisk-r2 at lists.digium.com>
Subject: Re: [asterisk-r2] No outgoing or incoming calls using Elastix
1.5.2. Perhaps a timing issue

By the way, here's an output of an incoming call:

[20:40:51:432] [Thread: 1100589376] [Chan 1] - Call started at Tue Aug  4
20:40:51 2009 on chan 1
[20:40:51:432] [Thread: 1100589376] [Chan 1] - CAS Tx >> [SEIZE ACK] 0x0C
[20:40:51:432] [Thread: 1100589376] [Chan 1] - CAS Raw Tx >> 0x0D
[20:40:55:913] [Thread: 1100589376] [Chan 1] - Bits changed from 0x00 to
0x08
[20:40:55:913] [Thread: 1100589376] [Chan 1] - CAS Rx << [CLEAR FORWARD]
0x08
[20:40:55:913] [Thread: 1100589376] [Chan 1] - Far end disconnected. Reason:
Normal Clearing
[20:40:55:913] [Thread: 1100589376] [Chan 1] - Call ended
[20:40:55:913] [Thread: 1100589376] [Chan 1] - Attempting to cancel timer
timer 0
[20:40:55:913] [Thread: 1100589376] [Chan 1] - Cannot cancel timer 0




On Tue, Aug 4, 2009 at 8:36 PM, Gerardo Barajas <gerardo.barajas at gmail.com>
wrote:
> Carlos,
> after changing what you suggested it's still the same
> 
> 
> 
> 
> On Tue, Aug 4, 2009 at 7:55 PM, Carlos Rangel <crangeltpmex at hotmail.com>
> wrote:
>> 
>> First of all. Change the configuration of system.conf to
>> 
>> span=1,1,0,cas,hdb3
>> cas=1-15:1101
>> dchan=16
>> cas=17-31:1101
>> 
>> See what happens.
>> 
>> Regards
>> CR
>> 
>> ________________________________
>>> > From: gerardo.barajas at gmail.com
>>> > Date: Tue, 4 Aug 2009 19:40:58 -0500
>>> > To: asterisk-r2 at lists.digium.com
>>> > Subject: [asterisk-r2] No outgoing or incoming calls using Elastix 1.5.2.
>>> Perhaps a timing issue
>>> >
>>> > Hello everyone.
>>> >
>>> > I've recently installed an Elastix v1.5.2. server with the following
>>> relevant packages:
>>> >
>>> > wanpipe-util.- 3.4.1-5
>>> > kernel-module-wanpipe.x86_64 -- 3.4.1-5_2.6.18_92.1.22
>>> >
>>> > asterisk --1.4.25.1
>>> > dahdi.x86_64 -- 2.1.0.4-24
>>> > libopenr2.x86_64 -- 1.1.0-3
>>> >
>>> > I am using an A101 Sangoma Card.
>>> >
>>> > As the title says, Asterisk is not able to receive or make any call. I'm
>>> playing around with parameters but no success at all. It's looks like the E1
>>> is frozen. By the way, the carrier is Telmex and there are only 21 channels.
>>> >
>>> >
>>> >
>>> >
>>> > This is an inbound Call log:
>>> > http://pastebin.com/m2116ca87
>>> >
>>> > And here are the relevant configuration files.
>>> >
>>> > dahdi-system.conf:
>>> > http://pastebin.com/m518fd8ca
>>> >
>>> >
>>> >
>>> > relevant chan_dahdi.conf parameters:
>>> >
>>> > http://pastebin.com/m22cc99b3
>>> >
>>> >
>>> > Hope someone can give me a hint to get it working.
>>> >
>>> > Kind regards.
>> _________________________________________________________________
>> Con Windows Live, puedes organizar, editar y compartir tus fotos.
>> http://www.microsoft.com/mexico/windows/windowslive/products/photo-gallery-ed
>> it.aspx
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>> 
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-r2
> 



_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-r2 mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-r2

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20090805/a142cf08/attachment.htm