[asterisk-r2] DTMF issue after migrating Unicall -> OpenR2

[Moises Silva]

There are some reasons for ZT_DIAL to fail in the zaptel drivers.

1. kmalloc() fails.
2. copy_from_user() fails
3. There is no tone zone loaded for that channel.
4. Transmit buffer is full.
5. Invalid operation specified.

All of them are unlikely or just not possible given the information
you provided, except for no tone zone. If you check /var/log/messages
I bet you will see a warning saying zaptel: Cannot dial until a tone
zone is loaded.

Is that the case?

Moy


On Mon, Apr 20, 2009 at 12:39 PM, Norman Schmidt
<norman at omegatecnologia.com> wrote:
> Hello Moisés, here goes:
>
> Asterisk version:
>
> CLI> core show version
> Asterisk 1.4.21.2 built by root @ servidor on a i686 running Linux on
> 2009-04-12 19:48:21 UTC
>
> OpenR2 patch downloaded from:
> http://openr2.googlecode.com/files/openr2-asterisk-1.4.21.patch
>
> CLI> mfcr2 show version
> OpenR2 version: 1.1.0, revision: exported
>
> LibopenR2 version 1.1.0 download from:
> http://openr2.googlecode.com/files/openr2-1.1.0.tar.gz
>
> Zaptel version 1.4.12.1
> # cat /sys/module/zaptel/version
> 1.4.12.1
>
> Norman
>
>> ----- Mensagem Original -----
>> Assunto: Re: [asterisk-r2] DTMF issue after migrating Unicall -> OpenR2
>> De: Moises Silva <moises.silva at gmail.com>
>>  Para: "Norman Schmidt"
> <norman at omegatecnologia.com>,asterisk-r2 at lists.digium.com
>> Data: 20/04/2009 13:07
>>
>>
>> > which is called to get its IVR on the internal leg of the gateway (group
> 3).
>> > Any clue or starting point? Is this related to the zaptel OpenR2 patch?
>>
>> In short, this does not seem related to R2. But I need your Asterisk
>> version and the exact download link of the patch you applied to verify
>> how the code looks. However, this WARNING you see, is displayed by
>> Asterisk when the zaptel driver could not generate/send the requested
>> DTMF digit, sounds like a driver problem, but I am not aware of any
>> zaptel issues that would result in DTMF failures (more concretely
>> ZT_DIAL command failures).
>>
>> Post here the following:
>>
>> Asterisk version (core show version)
>> OpenR2 patch download link.
>> Zaptel/DAHDI Version (/sys/module/dahdi/version or
> /sys/module/zaptel/version)
>>
>> If you are still using Zaptel and not DAHDI, you should try to upgrade
>> to DAHDI. You don't need to change anything in the dial plan, you can
>> work with DAHDI using Asterisk compatibility mode with Zaptel (AFAIR).
>>
>> Moisés Silva,
>>
>>
>> --
>> "I do not agree with what you have to say, but I’ll defend to the
>> death your right to say it." Voltaire
>
>
>



-- 
"I do not agree with what you have to say, but I’ll defend to the
death your right to say it." Voltaire