[asterisk-r2] MFCR2 With Unicall - can unicall affect zaptel commands?

Tue Apr 7 12:47:09 CDT 2009

Try to load the chan_zap.so module manually to see if you get some error.

Juan Carlos
~ Lo que no te mata te fortalece ~

On Tue, Apr 7, 2009 at 12:44 PM, Giovanny Magallanes
<gmagallanes at gmail.com> wrote:
> I'm using Elastix 1.1-8 with:
>
> asterisk-1.4.19
> spandsp-0.0.4
> unicall-0.0.5pre1
> zaptel-1.4.9.2
> unicall-0.0.5pre1
> libmfcr2-0.0.3
> libsupertone-0.0.2
> libunicall-0.0.3
>
> Regards,
>
> Giovanni
>
> 2009/4/7, Giovanny Magallanes <gmagallanes at gmail.com>:
>>
>> Ok, Thanks. The chan_zap commands are unavailable, but unicall commands
>> and my E1 MFC/R2 are OK.
>>
>> Giovanni
>>
>>
>> 2009/4/7, Moises Silva <moises.silva at gmail.com>:
>>>
>>> I don't understand your problem. And no, unicall has nothing to do
>>> with chan_zap.so commands.
>>>
>>> Please, in the future, don't hijack threads, open a new thread for
>>> your discussion. This time I changed the subject already.
>>>
>>> Moy
>>>
>>> On Tue, Apr 7, 2009 at 1:08 AM, Giovanny Magallanes
>>> <gmagallanes at gmail.com> wrote:
>>> > Hi, Guys.
>>> >
>>> > I did not type any zaptel commands in asterisk console. I have
>>> > installed
>>> > Elastix 1.1-8 with unicall and it is working fine with a Digium
>>> > TE212-P.
>>> >
>>> > [root at elastix asterisk]# find -P / -name chan_zap.so
>>> > /usr/lib/asterisk/modules/chan_zap.so
>>> > /usr/src/astunicall-1.4.19-0.1/asterisk-1.4.19/channels/chan_zap.so
>>> > [root at elastix asterisk]#
>>> > elastix*CLI> load chan_zap.so
>>> >   == Parsing '/etc/asterisk/zapata.conf': Found
>>> >   == Parsing '/etc/asterisk/zapata_additional.conf': Found
>>> >   == Parsing '/etc/asterisk/zapata-channels.conf': Found
>>> >     -- Registered channel 63, FXO Kewlstart signalling
>>> >     -- Registered channel 64, FXO Kewlstart signalling
>>> >     -- Registered channel 65, FXO Kewlstart signalling
>>> >     -- Registered channel 66, FXO Kewlstart signalling
>>> >
>>> >
>>> > Can unicall affect zaptel commands in asterisk??
>>> >
>>> > Thanks
>>> >
>>> > Giovanni Magallanes
>>> >
>>> >
>>> >
>>> > 2009/4/6, Fernando Berretta <fernando.berretta at gmail.com>:
>>> >>
>>> >> Hi,
>>> >>
>>> >> I've installed Asterisk 1.4 and Openr2 1.1 all is working well. I've
>>> >> connected a crossover cable to TE122 board and board lite has went
>>> >> green. But when I've  tried to make a call, I've got the following
>>> >> trace:
>>> >>
>>> >> [15:35:00:218] [Thread: 3078437776] [Chan 1] - Call started at Mon Apr
>>> >> 6 15:35:00 2009 on chan 1
>>> >> [15:35:00:218] [Thread: 3078437776] [Chan 1] - CAS Tx >> [SEIZE] 0x00
>>> >> [15:35:00:218] [Thread: 3078437776] [Chan 1] - CAS Raw Tx >> 0x01
>>> >> [15:35:00:242] [Thread: 3078437776] [Chan 1] - Bits changed from 0x08
>>> >> to
>>> >> 0x00
>>> >> [15:35:00:242] [Thread: 3078437776] [Chan 1] - CAS Rx << [FORCED
>>> >> RELEASE] 0x00
>>> >> [15:35:00:242] [Thread: 3078437776] [Chan 1] - Disconnection before
>>> >> seize ack detected![15:35:00:242] [Thread: 3078437776] [Chan 1] - Far
>>> >> end disconnected. Reason: Forced Release
>>> >> [15:35:00:245] [Thread: 3078437776] [Chan 1] - Attempting to cancel
>>> >> timer timer 0
>>> >> [15:35:00:245] [Thread: 3078437776] [Chan 1] - Cannot cancel timer 0
>>> >> [15:35:00:245] [Thread: 3078437776] [Chan 1] - CAS Tx >> [CLEAR
>>> >> FORWARD]
>>> >> 0x08
>>> >> [15:35:00:245] [Thread: 3078437776] [Chan 1] - CAS Raw Tx >> 0x09
>>> >> [15:35:00:306] [Thread: 3081632656] [Chan 1] - Bits changed from 0x00
>>> >> to
>>> >> 0x08
>>> >> [15:35:00:306] [Thread: 3081632656] [Chan 1] - CAS Rx << [IDLE] 0x08
>>> >> [15:35:00:306] [Thread: 3081632656] [Chan 1] - Call ended
>>> >> [15:35:00:306] [Thread: 3081632656] [Chan 1] - Attempting to cancel
>>> >> timer timer 0
>>> >> [15:35:00:306] [Thread: 3081632656] [Chan 1] - Cannot cancel timer 0
>>> >>
>>> >> Is there some way to complete a call through crossover cable with R2 ?
>>> >> How should I configure dahdi ?
>>> >>
>>> >> Best Regards,
>>> >> Fernando
>>> >>
>>> >> _______________________________________________
>>> >> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>> >>
>>> >> asterisk-r2 mailing list
>>> >> To UNSUBSCRIBE or update options visit:
>>> >>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>> >
>>> >
>>> > _______________________________________________
>>> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>> >
>>> > asterisk-r2 mailing list
>>> > To UNSUBSCRIBE or update options visit:
>>> >   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>> >
>>>
>>>
>>>
>>> --
>>> "I do not agree with what you have to say, but I’ll defend to the
>>> death your right to say it." Voltaire
>>>
>>> _______________________________________________
>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>
>>> asterisk-r2 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>