[asterisk-r2] MFCR2 With CrossOver Cable

Melcon Moraes melcon at gmail.com
Tue Apr 7 11:25:17 CDT 2009


Or a card with 2 spans as well.


Just to be clear :)

-MM

On Tue, Apr 7, 2009 at 8:45 AM, Fernando Berretta
<fernando.berretta at gmail.com> wrote:
> Thank you, I'll try to get one more card
>
> Melcon Moraes wrote:
>
> You need at least 2 spans to make it work the way you thought.
>
>
> -MM
>
>
> On Mon, Apr 6, 2009 at 5:21 PM, Fernando Berretta
> <fernando.berretta at gmail.com> wrote:
>
>
> Hi,
>
> I've installed Asterisk 1.4 and Openr2 1.1 all is working well. I've
> connected a crossover cable to TE122 board and board lite has went
> green. But when I've  tried to make a call, I've got the following trace:
>
> [15:35:00:218] [Thread: 3078437776] [Chan 1] - Call started at Mon Apr
> 6 15:35:00 2009 on chan 1
> [15:35:00:218] [Thread: 3078437776] [Chan 1] - CAS Tx >> [SEIZE] 0x00
> [15:35:00:218] [Thread: 3078437776] [Chan 1] - CAS Raw Tx >> 0x01
> [15:35:00:242] [Thread: 3078437776] [Chan 1] - Bits changed from 0x08 to
> 0x00
> [15:35:00:242] [Thread: 3078437776] [Chan 1] - CAS Rx << [FORCED
> RELEASE] 0x00
> [15:35:00:242] [Thread: 3078437776] [Chan 1] - Disconnection before
> seize ack detected![15:35:00:242] [Thread: 3078437776] [Chan 1] - Far
> end disconnected. Reason: Forced Release
> [15:35:00:245] [Thread: 3078437776] [Chan 1] - Attempting to cancel
> timer timer 0
> [15:35:00:245] [Thread: 3078437776] [Chan 1] - Cannot cancel timer 0
> [15:35:00:245] [Thread: 3078437776] [Chan 1] - CAS Tx >> [CLEAR FORWARD]
> 0x08
> [15:35:00:245] [Thread: 3078437776] [Chan 1] - CAS Raw Tx >> 0x09
> [15:35:00:306] [Thread: 3081632656] [Chan 1] - Bits changed from 0x00 to
> 0x08
> [15:35:00:306] [Thread: 3081632656] [Chan 1] - CAS Rx << [IDLE] 0x08
> [15:35:00:306] [Thread: 3081632656] [Chan 1] - Call ended
> [15:35:00:306] [Thread: 3081632656] [Chan 1] - Attempting to cancel
> timer timer 0
> [15:35:00:306] [Thread: 3081632656] [Chan 1] - Cannot cancel timer 0
>
> Is there some way to complete a call through crossover cable with R2 ?
> How should I configure dahdi ?
>
> Best Regards,
> Fernando
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-r2
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>



More information about the asterisk-r2 mailing list