[asterisk-r2] Second R2 not signalling

[Mariano Lecuona]

Thank you very much for the update. I'll try that and I let you know the
results.

2009/4/6 Gerardo Barajas <gerardo.barajas at gmail.com>

> Have you "looped-back" your second E1? If the answer is "yes", it's
> still yellow-alarmed? If it is not yellow-alarmed, you should talk
> again with your Telco, because your card is well configured.
>
> Another idea is to connect your actual E1 #1 in the second slot of the
> card and connect the E1 #2 to the first one and check if the second E1
> is alarmed regardless its position in the card.
>
> Below is T1/E1 loop-back cable pin-out:
> 1<->4
> 2<->5
>
> And there's no need to configure zapata.conf.
>
> Take care.
>
> On Sun, Apr 5, 2009 at 10:23 PM, Mariano Lecuona <mlecuona at gmail.com>
> wrote:
> >
> > I have configured my asterisk (free pbx) with unicall that same as Moises
> post. the only diference with all examples showed is that I have conected 2
> MFC/R2 lines to my box. The first MFC/R2 line works perfectly actually my
> client is working with those 30 channels. But the second one, and here is my
> issue, does not get sync with teco. Telcom from Argentina uses 32 chanels
> for each MFC/R2 where that channel 0 and the channel 16 are used for data.
> and te rest of them for voice. Channel 0 is used for Sync. Teco tells me
> that on the second MFC/R2 on channel 0 they receive an "ais" ( All 1's).
> Actually I have the second span with yellow alarm,
> >
> > I have been playing with configuration for a long time. Actaully I
> started to think that channel 32, could be the 0 channel on second MFC/R2
> line, but i setted that with no luck.
> >
> > Blow I am sharing my config files, you will see that some lines are
> comented, they show thet diffrent things I have triend with no luck at all.
> >
> > Hope you can give me some ideas to troubleshoot. If there is missing
> information let me know.
> >
> > zaptel.conf
> >
> > # MFC/R2 normalmente no usa CRC4
> > span=1,1,0,cas,hdb3
> > # span=2,0,0,cas,hdb3
> > span=2,2,0,cas,hdb3
> > #
> > cas=1-15:1101
> > dchan=16
> > cas=17-31:1101
> > #
> > cas=32-46:1101
> > dchan=47
> > # cas=33-46:1101
> > # dchan=32,47
> > cas=48-62:1101
> > #
> > loadzone=ar
> > defaultzone=ar
> > #########################################
> > unicall.conf
> >
> > [Channels]
> > language=en
> > usecallerid=yes
> > echocancel=yes
> > rxgain=0
> > txgain=0
> > callgroup=0
> > pickupgroup=0
> > amaflags=default
> > accountcode=avantel
> > musiconhold=default
> > context=default
> >
> > group=1
> > loglevel=255
> > protocolclass=mfcr2
> > protocolvariant=ar,10,4
> > immediate=no
> > ; channel => 2-15
> > channel => 1-15
> > channel => 17-31
> > ;
> > group=2
> > loglevel=255
> > protocolclass=mfcr2
> > protocolvariant=ar,10,4
> > channel => 32-46
> > ;channel => 33-47
> > channel => 48-62
> > ;channel => 49-62
> >
> > #########################################
> > zapata.conf
> >
> > [trunkgroups]
> >
> > [channels]
> >
> > language=en
> > context=default
> > rxwink=300
> >
> > usecallerid=yes
> > hidecallerid=no
> > callwaiting=yes
> > usecallingpres=yes
> > callwaitingcallerid=yes
> > threewaycalling=yes
> > transfer=yes
> > cancallforward=yes
> > callreturn=yes
> > echocancel=yes
> > echocancelwhenbridged=no
> > echotraining=yes
> > rxgain=0.0
> > txgain=0.0
> > group=1
> > callgroup=1
> > pickupgroup=1
> > immediate=no
> > signalling=fxs_ks
> > faxdetect=both
> > ; pridialplan=unknown
> >
> > ; Include genzaptelconf configs
> > ; #include zapata-auto.conf
> >
> > #########################################
> >
> > I believe that is not neccesary to have zapata.conf configured since
> unicall.conf will override any config written on zapata.conf, right?
> >
> > --
> >
> > Mariano Lecuona
> >
> > _______________________________________________
> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
> >
> > asterisk-r2 mailing list
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-r2
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>



-- 
Mariano Lecuona
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20090406/b1997d64/attachment.htm