[asterisk-r2] [MFCR2+LIBOPENR2 TELEFONICA COLOMBIA]

Fri Apr 3 11:42:25 CDT 2009

Forget about timer 0, that is just a debug message not an error.

Tone 6 is address complete charge setup in ITU variant, but AFAIK
Colombia does not use ITU, however few people in Colombia has used
openr2 to my knowledge or they use it but don't provide feedback to
the community about it. For openr2 tone 6 means "request category and
ANI" for the Colombian variant, however that may be wrong, or may be
that is different from one Colombian provider to others.

Are you supposed to receive caller id? ANI?

Try changing to the ITU variant (mfcr2_variant=itu) and let us know
what the results are.

Moy

On Fri, Apr 3, 2009 at 12:30 PM, Carlos Andrés Tapasco Viera
<ctapasco at opengroupsa.com> wrote:
> Hi masters, I was talking with my provider in order to ask him about DNIS
> trouble, and he told me my DNIS must to be 3 in lenght.  I'd change these
> parameter and now I'm able to obtain complete DNIS and digit 6, that means I
> can talk with far end (that toldme the provider guy), but I still having
> troubles with timer 0, and I really cannot understand what's happening with
> this.  I'll attach my log file in the moment of the call.  Thanks in
> advance.
>
> ******************************************
> ******************************************
> [10:55:29:337] [Thread: 3079842704] [Chan 1] - Call started at Fri Apr  3
> 10:55:29 2009 on chan 1
> [10:55:29:337] [Thread: 3079842704] [Chan 1] - CAS Tx >> [SEIZE ACK] 0x0C
> [10:55:29:337] [Thread: 3079842704] [Chan 1] - CAS Raw Tx >> 0x0D
> [10:55:29:448] [Thread: 3079842704] [Chan 1] - MF Rx << 0 [ON]
> [10:55:29:448] [Thread: 3079842704] [Chan 1] - Attempting to cancel timer
> timer 0
> [10:55:29:448] [Thread: 3079842704] [Chan 1] - Cannot cancel timer 0
> [10:55:29:448] [Thread: 3079842704] [Chan 1] - Getting DNIS digit 0
> [10:55:29:448] [Thread: 3079842704] [Chan 1] - DNIS so far: 0, expected
> length: 3
> [10:55:29:448] [Thread: 3079842704] [Chan 1] - Requesting next DNIS with
> signal 0x31.
> [10:55:29:448] [Thread: 3079842704] [Chan 1] - MF Tx >> 1 [ON]
> [10:55:29:528] [Thread: 3079842704] [Chan 1] - MF Rx << 0 [OFF]
> [10:55:29:528] [Thread: 3079842704] [Chan 1] - MF Tx >> 1 [OFF]
> [10:55:29:608] [Thread: 3079842704] [Chan 1] - MF Rx << 7 [ON]
> [10:55:29:608] [Thread: 3079842704] [Chan 1] - Attempting to cancel timer
> timer 2
> [10:55:29:608] [Thread: 3079842704] [Chan 1] - timer id 2 found, cancelling
> it now
> [10:55:29:608] [Thread: 3079842704] [Chan 1] - Getting DNIS digit 7
> [10:55:29:608] [Thread: 3079842704] [Chan 1] - DNIS so far: 07, expected
> length: 3
> [10:55:29:608] [Thread: 3079842704] [Chan 1] - Requesting next DNIS with
> signal 0x31.
> [10:55:29:608] [Thread: 3079842704] [Chan 1] - MF Tx >> 1 [ON]
> [10:55:29:688] [Thread: 3079842704] [Chan 1] - MF Rx << 7 [OFF]
> [10:55:29:688] [Thread: 3079842704] [Chan 1] - MF Tx >> 1 [OFF]
> [10:55:29:768] [Thread: 3079842704] [Chan 1] - MF Rx << 0 [ON]
> [10:55:29:768] [Thread: 3079842704] [Chan 1] - Attempting to cancel timer
> timer 3
> [10:55:29:768] [Thread: 3079842704] [Chan 1] - timer id 3 found, cancelling
> it now
> [10:55:29:768] [Thread: 3079842704] [Chan 1] - Getting DNIS digit 0
> [10:55:29:768] [Thread: 3079842704] [Chan 1] - DNIS so far: 070, expected
> length: 3
> [10:55:29:768] [Thread: 3079842704] [Chan 1] - Done getting DNIS!
> [10:55:29:768] [Thread: 3079842704] [Chan 1] - MF Tx >> 6 [ON]
> [10:55:29:828] [Thread: 3079842704] [Chan 1] - MF Rx << 0 [OFF]
> [10:55:29:828] [Thread: 3079842704] [Chan 1] - MF Tx >> 6 [OFF]
> [10:55:34:769] [Thread: 3079842704] [Chan 1] - Attempting to cancel timer
> timer 4
> [10:55:34:769] [Thread: 3079842704] [Chan 1] - timer id 4 found, cancelling
> it now
> [10:55:34:769] [Thread: 3079842704] [Chan 1] - calling timer callback
> [10:55:34:769] [Thread: 3079842704] [Chan 1] - MF back cycle timed out!
> [10:55:34:769] [Thread: 3079842704] [Chan 1] - Protocol error. Reason =
> Multi Frequency Cycle Timeout, R2 State = Seize ACK Transmitted, MF state =
> Category Request Transmitted, MF Group = Backward Group A, CAS = 0x00
> DNIS = 070, ANI = , MF = 0x20
> [10:55:34:769] [Thread: 3079842704] [Chan 1] - Attempting to cancel timer
> timer 0
> [10:55:34:769] [Thread: 3079842704] [Chan 1] - Cannot cancel timer 0
> ******************************************
> ******************************************
>
> P.D: I need DNIS because I want to assign some direct lines to some
> extensions.
>
>
> On Thu, Apr 2, 2009 at 3:17 PM, Moises Silva <moises.silva at gmail.com> wrote:
>>
>> The other end is not sending us the next DNIS, are you sure you are
>> supposed to get 4 DNIS digits? Ask your telco how many digits to ask
>> for and also ask them if you should ask for ANI before asking for DNIS
>> or if it does matter at all
>>
>> Moy
>
>
>
> --
> Carlos Andrés Tapasco Viera
> OpenGroup S.A.
> Ingeniero Electrónico
> Area de Telecomunicaciones
> IP-PBX +57-24862030
> Mobile 1 +57-3117650143
> Mobile 2 +57-3012141132
> Santiago de Cali
> Valle del Cauca
> Colombia
> Sudamérica
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>

-- 
"I do not agree with what you have to say, but I’ll defend to the
death your right to say it." Voltaire