[asterisk-r2] Elastix-1.5 Open R2
"ROQUÉ, Francisco Emiliano"
froque at 3tech.com.ar
Wed Apr 1 15:38:18 CDT 2009
Thacks for all replies...Sorry for posting in Spanish...
I´m using a loopback test (pins 1-->4 and 2--->5) for my TE121P with E1
line... the call outgoing transforms in one incoming call.... (IVR and
then QUEUE)... but It does not work yet...
Debugging one call, i see:
[Apr 1 17:06:11] VERBOSE[15399] logger.c: -- Executing
[s at macro-dialout-trunk:26] Dial("SIP/303-08a2fe30",
"dahdi/g1/111111111222222333333|300|") in new stack
[Apr 1 17:06:11] NOTICE[15399] app_dial.c: Hey! chan SIP/303-08a2fe30's
context='macro-dialout-trunk', and exten='s'
[Apr 1 17:06:11] DEBUG[15399] chan_dahdi.c: no MFC/R2 category
specified for chan DAHDI/1-1, using default National Subscriber
[Apr 1 17:06:11] DEBUG[15399] chan_dahdi.c: Chan 1 - Attempting to make
call (ANI=7777, DNIS=111111111222222333333, category=National Subscriber)
[Apr 1 17:06:11] DEBUG[15399] chan_dahdi.c: Chan 1 - CAS Tx >> [SEIZE] 0x00
[Apr 1 17:06:11] DEBUG[15399] chan_dahdi.c: Chan 1 - CAS Raw Tx >> 0x01
[Apr 1 17:06:11] VERBOSE[15399] logger.c: -- Called
g1/111111111222222333333
[Apr 1 17:06:11] DEBUG[15399] chan_dahdi.c: bits changed in chan 1
[Apr 1 17:06:11] DEBUG[15399] chan_dahdi.c: Chan 1 - Bits changed from
0x08 to 0x00
[Apr 1 17:06:11] DEBUG[15399] chan_dahdi.c: Chan 1 - CAS Rx << [FORCED
RELEASE] 0x00
[Apr 1 17:06:11] DEBUG[15399] chan_dahdi.c: Chan 1 - Disconnection
before seize ack detected![Apr 1 17:06:11] NOTICE[15399] chan_dahdi.c:
Chan 1 - Far end disconnected. Reason: Forced Release
[Apr 1 17:06:11] NOTICE[15399] chan_dahdi.c: MFC/R2 call disconnected
on chan 1
[Apr 1 17:06:11] DEBUG[15399] chan_dahdi.c: disconnecting MFC/R2 call
on chan 1
[Apr 1 17:06:11] DEBUG[15399] chan_dahdi.c: Chan 1 - CAS Tx >> [CLEAR
FORWARD] 0x08
[Apr 1 17:06:11] DEBUG[15399] chan_dahdi.c: Chan 1 - CAS Raw Tx >> 0x09
[Apr 1 17:06:11] VERBOSE[15399] logger.c: -- Hungup 'DAHDI/1-1'
The configuration files are:
/etc/dahdi/system.conf
span=1,1,0,cas,hdb3
cas=1-15:1101
dchan=16
cas=17-31:1101
loadzone = us
defaultzone = us
/etc/asterisk/chan_dahdi.conf:
[channels]
context=from-pstn
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
faxdetect=incoming
echotraining=800
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
language=es
signalling=mfcr2
group=1
mfcr2_variant=ar
mfcr2_max_ani=10
mfcr2_max_dnis=4
mfcr2_logging=all
channel=1-15
channel=17-31
immediate=no
Versions:
libopenr2-1.1.0-1
Elastix: 1.5.9
CentOS: 5.1
dahdi-2.1.0.4-5
Someone can help me?
Regards
--
Ing Francisco Roqué
3Tech SRL
Plaza Paso Nº92, EP B
Buenos Aires, Argentina.
Tel. +54 11 5252 8727
+54 221 4255116
www.3tech.com.ar
Gerardo Barajas wrote:
> Sorry for posting in Spanish
>
> Samuel Goldwyn - "I don't think anyone should write their
> autobiography until after they're dead."
>
> 2009/4/1 Gerardo Barajas <gerardo.barajas at gmail.com
> <mailto:gerardo.barajas at gmail.com>>
>
> Dado que Elastix 1.5 trae dahdi y libopenr2, pues la marcacion es:
> dahdil/g0/${EXTEN}, o algo asi :P
>
> Bob Hope - "You know you are getting old when the candles cost
> more than the cake."
>
> 2009/4/1 "ROQUÉ, Francisco Emiliano" <froque at 3tech.com.ar
> <mailto:froque at 3tech.com.ar>>
>
> Moisés, te hago una consulta.
> Estoy usando Elastix 1.5, el cuál trae soporte nativo para la
> señalización R2 justamente con openr2. La consulta es la
> siguiente:
> como sería la sintaxis del comando Dial() usando esta librería?...
> Antes con Unicall, hacía un Dial sobre Unicall/g0/${EXTEN}....
> como
> sería ahora con openr2?
>
> Ya tengo configurada la placa TE121P, veo los canales con
> mfcr2 show
> channels desde la consola de asterisk en estado idle... pero no
> encuentro documentación ni mucha ayuda acerca de como crear los
> troncales y rutas salientes con esta libreria...
>
> Desde ya muchas gracias
>
> Saludos, Francisco
>
> --
> Ing Francisco Roqué
> 3Tech SRL
> Plaza Paso Nº92, EP B
> Buenos Aires, Argentina.
> Tel. +54 11 5252 8727
> +54 221 4255116
> www.3tech.com.ar <http://www.3tech.com.ar>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by
> http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-r2
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-r2
More information about the asterisk-r2
mailing list