[asterisk-r2] Asterisk with R2 not forwarding calls

[Moises Silva]

Hola Ignacio,

For the incoming call, this is what is happening:

Asterisk correctly detect that a new call is arriving, then it
acknowledges the "start a call" message. But 4 seconds after that, we
receive a "Clear Forward" message which basically means the calling
end is requesting hangup. It is very likely that somehow the Nec PBX
is not seeing the bit change we did.

For the outgoing call:

Asterisk "requests a call" and the other end does not respond in the
7/8 seconds that we wait for them, therefore we just hangup, again,
this looks like the Nec PBX does not recognize our bit pattern change
and therefore does not detect our call attempt.

Is there any chance you can get a trace of the NEC Pbx? How do you
have connected the NEC to Asterisk?

Moy

On Thu, Sep 25, 2008 at 9:18 AM, Ignacio Rodriguez
<ignacio.rodriguez at supportcenter.cl> wrote:
> Hi everyone,
>
>
>
> I was ignorant about R2 until I got a someone reuesting to connect a Nec PBX
> to an Asterisk box using the E1 R2 interface (no pri available).
> After several trial and error attempts I was able to build Asterisk 1.6 with
> Moises's Openr2 library (I had to realize several other things like the fact
> that 1.6 only works with Dahdi).  Unfortunately I am still having problems
> and I hope you can help me.
>
> For some reason when I make calls from the NEC PBX to Asterisk and vice
> versa the calls are not going thru. For incoming calls I see the following
> messages in CLI:
>
> [Sep 23 19:11:22] NOTICE[2609]: chan_dahdi.c:1331 dahdi_r2_on_call_init: New
> MFC/R2 call detected on chan 3.
> [Sep 23 19:11:57] NOTICE[2609]: chan_dahdi.c:1534 dahdi_r2_write_log: Chan 3
> - Far end disconnected. Reason: Normal Clearing
> [Sep 23 19:11:57] NOTICE[2609]: chan_dahdi.c:1491
> dahdi_r2_on_call_disconnected: MFC/R2 call disconnected on chan 3
> [Sep 23 19:11:57] NOTICE[2609]: chan_dahdi.c:1403 dahdi_r2_on_call_end:
> MFC/R2 call end on chan 3
>
>
>
> The first one corresponds to the moment when the call starts and the other 3
> when hung up.
>
> I have using all the debugging tools available from Dahdi (dahdi_test,
> sahdi_tool and dahdi_monitor) and all them show some kind of activity (
> changing ABCD bits) which makes me believe the problem is not with dahdi but
> with Asterisk not forwarding the calls (just a supposition).
>
> My chan_dahdi.conf is
>
> [trunkgroups]
>
> [channels]
> usecallerid=yes
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
>
> signalling=mfcr2
> mfcr2_variant=itu
> mfcr2_get_ani_first=no
> mfcr2_max_ani=20
> mfcr2_max_dnis=4
> mfcr2_category=national_subscriber
> mfcr2_logdir=span1
> mfcr2_logging=all
>
> context=nec
> group=0
> callgroup=0
> pickupgroup=0
> channel => 1-15
> channel => 17-31
>
> And my  /etc/dahdi/system.conf is
>
> loadzone = us
> defaultzone = us
>
> span=1,1,0,cas,hdb3
> cas=1-15:1101
> cas=17-31:1101
> dchan=16
>
> I also got some debugging lines (from /var/log/asterisk/mcfr2/span1
> directory). The first corresponding to one incoming call and the second for
> an outgoing call.
>
> Incoming
>
>
>
> 20:09:19:541] [Thread: 3077131184] [Chan 5] - Call started at Tue Sep 23
>
> 20:09:19 2008 on chan 5
>
> [20:09:19:541] [Thread: 3077131184] [Chan 5] - ABCD Tx >> [SEIZE ACK] 0x0C
>
> [20:09:19:542] [Thread: 3077131184] [Chan 5] - ABCD Raw Tx >> 0x0D
>
> [20:09:23:701] [Thread: 3077131184] [Chan 5] - ABCD Raw Rx << 0x09
>
> [20:09:23:701] [Thread: 3077131184] [Chan 5] - Bits changed from 0x00 to
>
> 0x08
>
> [20:09:23:701] [Thread: 3077131184] [Chan 5] - ABCD Rx << [CLEAR
>
> FORWARD] 0x08
>
> [20:09:23:701] [Thread: 3077131184] [Chan 5] - Far end disconnected.
>
> Reason: Normal Clearing
>
> [20:09:23:701] [Thread: 3077131184] [Chan 5] - Call ended
>
>
>
> Outgoing
>
> [20:10:50:350] [Thread: 3066108848] [Chan 31] - Call started at Tue Sep
>
> 23 20:10:50 2008 on chan 31
>
> [20:10:50:350] [Thread: 3066108848] [Chan 31] - ABCD Tx >> [SEIZE] 0x00
>
> [20:10:50:350] [Thread: 3066108848] [Chan 31] - ABCD Raw Tx >> 0x01
>
> [20:10:58:370] [Thread: 3066108848] [Chan 31] - calling callback on chan 31
>
> [20:10:58:370] [Thread: 3066108848] [Chan 31] - Seize Timeout Expired!
>
> [20:10:58:370] [Thread: 3066108848] [Chan 31] - Protocol error. Reason =
>
> Seize Timeout, R2 State = Seize Transmitted, MF state $
>
> [20:10:58:370] [Thread: 3066108848] [Chan 31] - DNIS = 150, ANI = 6000,
>
> Last MF Signal =
>
>
>
> Please let me know if someone can give me an idea of where the problem could
> be.
>
>
>
>
>
> Thanks,
>
>
>
> Ignacio
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>



-- 
"I do not agree with what you have to say, but I'll defend to the
death your right to say it." Voltaire