[asterisk-r2] OpenR2 Thailand problem
Peter Lindquist
peter.lindquist.th at gmail.com
Tue Oct 28 04:03:52 CDT 2008
Des,
Tested with that and that is now showing 1001/1001 for channel 1.
The results from calling in/out are the same.
//Peter
Des Hawes wrote:
> Maybe should change the mfcr2 variant from CN to the ITU variant
>
> Des Hawes
> Director - MetaVox Ltd.
> 15th Floor 253 Sukhumvit Soi 21 (Asoke),
> Klongtoey Nua, Wattana Bangkok 10110
> p:026641290 f:026641296 m: 0816222210
>
> -----Original Message-----
> From: asterisk-r2-bounces at lists.digium.com
> [mailto:asterisk-r2-bounces at lists.digium.com] On Behalf Of Peter Lindquist
> Sent: Tuesday, October 28, 2008 2:59 PM
> To: asterisk-r2 at lists.digium.com
> Subject: Re: [asterisk-r2] OpenR2 Thailand problem
>
> Juan Carlos, sorry yes, forgot to say. The telco only provides 1 channel
> for now to test.
>
> The zttool was run while asterisk was running. Just double checked.
>
> How do I make asterisk send 1001 instead of 1101?
>
> //Peter
>
> Juan Carlos Huerta wrote:
>
>> Peter, how many channels does your Telco provides you in the E1 link?
>> zttool only see the first channel unblocked (1001) from the Telco side
>> (Rx). Did you copy the zttool screen while Asterisk and chan_zap.so
>> still up and running? 'cause in the Asterisk side (Tx) it should be
>> 1001 to be IDLE instead of 1101.
>>
>> Try to get the same report and be sure that Asterisk is up and send it
>>
> again.
>
>> Juan Carlos
>>
>> On Mon, Oct 27, 2008 at 11:38 PM, Peter Lindquist
>> <peter.lindquist.th at gmail.com> wrote:
>>
>>
>>> Dear all,
>>>
>>> Trying to get OpenR2 working in Thailand with TOT (Telephone
>>> Organization of Thailand). Unfortunately I have very little information
>>> from TOT, they basically just say it's a E1 CAS R2 they provide.
>>>
>>> I have latest Trixbox set up together with libmfcr2 (OpenR2 version:
>>> 0.1.1, revision: 64) and asterisk compiled from the svn source
>>> (1.4.21.2) from libopenr2.org.
>>>
>>> My problems are the following:
>>>
>>> 1) When I make an incoming call - there is absolutely nothing happening,
>>> I see no ring indication or anything on the PBX. The call is eventually
>>> timed out by my telco.
>>>
>>> 2) When I make an outgoing call I see the following in the asterisk log:
>>> [Oct 27 21:06:32] DEBUG[13425] chan_zap.c: no MFC/R2 category specified
>>> for chan Zap/1-1, using default National Subscriber
>>> [Oct 27 21:06:32] DEBUG[13425] chan_zap.c: Chan 1 - Attempting to make
>>> call (ANI=2133, DNIS=0819369108, category=National Subscriber)
>>> [Oct 27 21:06:32] DEBUG[13425] chan_zap.c: Chan 1 - ABCD Raw Rx << 0x09
>>> [Oct 27 21:06:32] DEBUG[13425] chan_zap.c: Chan 1 - No change in bits
>>> [Oct 27 21:06:32] DEBUG[13425] chan_zap.c: Chan 1 - Call started at Mon
>>> Oct 27 21:06:32 2008 on chan 1
>>> [Oct 27 21:06:32] DEBUG[13425] chan_zap.c: Chan 1 - ABCD Tx >> [SEIZE]
>>>
> 0x00
>
>>> [Oct 27 21:06:32] DEBUG[13425] chan_zap.c: Chan 1 - ABCD Raw Tx >> 0x03
>>> [Oct 27 21:06:32] VERBOSE[13425] logger.c: -- Called g0/0819369108
>>> [Oct 27 21:06:40] DEBUG[13425] chan_zap.c: Chan 1 - calling callback on
>>> chan 1
>>> [Oct 27 21:06:40] WARNING[13425] chan_zap.c: Chan 1 - Seize Timeout
>>>
> Expired!
>
>>> [Oct 27 21:06:40] ERROR[13425] chan_zap.c: Chan 1 - Protocol error.
>>> Reason = Seize Timeout, R2 State = Seize Transmitted, MF state = MF
>>> Engine Off, MF Group$
>>> [Oct 27 21:06:40] DEBUG[13425] chan_zap.c: Chan 1 - DNIS = 0819369108,
>>> ANI = 2133, Last MF Signal =
>>> [Oct 27 21:06:40] DEBUG[13425] chan_zap.c: Chan 1 - ABCD Tx >> [IDLE]
>>>
> 0x08
>
>>> [Oct 27 21:06:40] DEBUG[13425] chan_zap.c: Chan 1 - ABCD Raw Tx >> 0x0B
>>> [Oct 27 21:06:40] ERROR[13425] chan_zap.c: MFC/R2 protocol error on chan
>>> 1: Seize Timeout
>>> [Oct 27 21:06:40] DEBUG[13425] chan_zap.c: disconnecting MFC/R2 call on
>>> chan 1
>>>
>>>
>>> 3) When reloading chan_zap I see:
>>> [Oct 27 21:10:09] VERBOSE[13434] logger.c: -- Reloading module
>>> 'chan_zap.so' (Zapata Telephony)
>>> [Oct 27 21:10:09] VERBOSE[13434] logger.c: == Parsing
>>> '/etc/asterisk/zapata.conf': [Oct 27 21:10:09] VERBOSE[13434] logger.c:
>>> Found
>>> [Oct 27 21:10:09] WARNING[13434] chan_zap.c: Ignoring signalling
>>> [Oct 27 21:10:09] WARNING[13434] chan_zap.c: Ignoring mfcr2_variant
>>> [Oct 27 21:10:09] WARNING[13434] chan_zap.c: Ignoring mfcr2_get_ani_first
>>> [Oct 27 21:10:09] WARNING[13434] chan_zap.c: Ignoring mfcr2_max_ani
>>> [Oct 27 21:10:09] WARNING[13434] chan_zap.c: Ignoring mfcr2_max_dnis
>>> [Oct 27 21:10:09] WARNING[13434] chan_zap.c: Ignoring mfcr2_category
>>> [Oct 27 21:10:09] WARNING[13434] chan_zap.c: Ignoring mfcr2_logdir
>>> [Oct 27 21:10:09] WARNING[13434] chan_zap.c: Ignoring mfcr2_logging
>>> [Oct 27 21:10:09] WARNING[13434] chan_zap.c: Ignoring mfcr2_call_files
>>> [Oct 27 21:10:09] WARNING[13434] chan_zap.c: Ignoring
>>> mfcr2_metering_pulse_timeout
>>> [Oct 27 21:10:09] VERBOSE[13434] logger.c: -- Reconfigured channel
>>> 1, MFC/R2 signalling
>>> ..
>>> [Oct 27 21:10:09] VERBOSE[13434] logger.c: -- Reconfigured channel
>>> 31, MFC/R2 signalling
>>>
>>> Even if my /etc/asterisk/zapata.conf has:
>>> ;MFCR2 settings
>>> signalling=mfcr2
>>> mfcr2_variant=cn
>>> mfcr2_get_ani_first=no
>>> mfcr2_max_ani=20
>>> mfcr2_max_dnis=7
>>> mfcr2_category=national_subscriber
>>> mfcr2_logdir=span1
>>> mfcr2_logging=all
>>> mfcr2_call_files=yes
>>> mfcr2_metering_pulse_timeout=-1
>>> callgroup=0
>>> pickupgroup=0
>>> channel => 1-15,17-31
>>>
>>> 4) Some other info:
>>> core show channeltypes:
>>> Zap Zapata Telephony Driver w/PRI w/OPENR2 no
>>> yes no
>>>
>>> mfcr2 show channels:
>>> Chan Variant Max ANI Max DNIS ANI First Immediate Accept Tx State Rx
>>>
> State
>
>>> 1 CN 20 7 No No IDLE IDLE
>>> 2 CN 20 7 No No IDLE BLOCK
>>> ..
>>> 31 CN 20 7 No No IDLE BLOCK
>>>
>>> zttool:
>>> Current Alarms: No alarms.
>>> Sync Source: Rhino R1T1 E1/PRA Card 0
>>> IRQ Misses: 0
>>> Bipolar Viol: 0
>>> Tx/Rx Levels: 0/ 0
>>> Total/Conf/Act: 31/ 31/ 30
>>> 1111111111222222222233
>>> 1234567890123456789012345678901
>>> TxA 111111111111111-111111111111111
>>> TxB 000000000000000-000000000000000
>>> TxC 111111111111111-111111111111111
>>> TxD 111111111111111-111111111111111
>>>
>>> RxA 111111111111111-111111111111111
>>> RxB 011111111111111-111111111111111
>>> RxC 011111111111111-111111111111111
>>> RxD 111111111111111-111111111111111
>>>
>>> I could really use some help in how to troubleshoot this and get it
>>>
> working!
>
>>> Best regards,
>>>
>>> Peter Lindqvist
>>> www.voxion.net / www.voipperiod.com
>>>
>>> _______________________________________________
>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>
>>> asterisk-r2 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>
>>>
>>>
>>
>>
>>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-r2
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-r2
>
>
More information about the asterisk-r2
mailing list