[asterisk-r2] asterisk-r2 Digest, Vol 2, Issue 19

[Moises Silva]

The correct BLOCK signal for zaptel is 1101

cas=1-15:1101

If you keep getting that error you will have to provide more debug
output if you want help here.

Moisés Silva

On Fri, Oct 17, 2008 at 6:23 PM,  <gabriel at arlab.com.ar> wrote:
> Hello list!
>
> i'm implementing a E1 line from Telecom Argentina
> in the debug i see this messages thousand times:
> "Protocol error. Reason = Invalid CAS"
> I think the parameters from zaptel.conf are wrong but i can't find in Internet
> the correct parameters ?
> any body can help me?
> zaptel.conf
>
> # Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" (MASTER)
> span=1,1,0,cas,hdb3
> # termtype: te
> cas=1-15:1100
> cas=17-31:1100
> dchan=16
>
> # Global data
>
> loadzone        = ar
> defaultzone     = ar
>
> Zapata.conf mfcr2 config:
>
> signalling=mfcr2
> mfcr2_variant=ar
> mfcr2_get_ani_first=no
> mfcr2_max_ani=10
> mfcr2_max_dnis=4
> mfcr2_category=national_subscriber
> mfcr2_logdir=span1
> mfcr2_logging=all
>
>
> thanks in advance,
>
> Ing. Gabriel Monsalvo
> ARLAB Tecnologia Informatica
>
>
>
> ----------------------------------------------------------------
> This message was sent using IMP, the Internet Messaging Program.
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>



-- 
"I do not agree with what you have to say, but I'll defend to the
death your right to say it." Voltaire