[asterisk-r2] Problem with incoming call

[Emerson M.]

Thanks Moises. I played a bit with the ANI and DNIS and got to
resolved the # sign problem. It's only calls from mobile phones now
that are having issues.

Thanks again and I apologize if I sent multiple email to the list.


Regards,
Emerson


2008/11/25 Moises Silva <moises.silva at gmail.com>:
> As you say, incoming calls are the ones that do not proceed unless you
> press the pound digit, so itś likely a Nortel configuration, nothing
> to do with openr2 in the incoming side.
>
> On Mon, Nov 24, 2008 at 8:02 PM, Emerson M. <pbxeqinfo at gmail.com> wrote:
>> Hi:
>>
>> I've successfully setup the the E1 card using OpenR2 library. Outgoing
>> calls from Trixbox works fine, however, incoming calls is where i'm
>> having issues. When I try to call the number assigned to the E1 line,
>> I need to press the "#" key after pressing the 7 digit phone number
>> otherwise the call won't enter trixbox. The same with calls from
>> mobile phone (10 digits) I'm here in Philippines. Trixbox is directly
>> connected to Nortel Option81c via Openvox E1 card.
>>
>> I've attached the log. I'm sorry if you got this in multiple copies.
>> Thanks in advance. Let me know if you need more info.
>>
>>
>> - Emerson
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>
>
>
>
> --
> "I do not agree with what you have to say, but I'll defend to the
> death your right to say it." Voltaire
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>