[asterisk-r2] pri show span 1

[Alfredo Andaluz Prado]

chan_dahdi.conf:

[trunkgroups]

[channels]
usecallerid=yes
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes

signalling=mfcr2
mfcr2_variant=itu
mfcr2_get_ani_first=no
mfcr2_max_ani=8
mfcr2_max_dnis=7
mfcr2_category=national_subscriber
mfcr2_logdir=span1
mfcr2_logging=all

context=incoming
group=0
callgroup=0
pickupgroup=0
channel => 1-15
channel => 17-31


system.conf

span=1,1,0,cas,hdb3
cas=1-15:1101
cas=17-31:1101
dchan=16

loadzone        = us
defaultzone     = us


thanks guys



Moises Silva wrote:
> Would you mind posting your final configuration here?
>
> On Wed, Nov 12, 2008 at 1:58 PM, Alfredo Andaluz Prado
> <devilsoulblack at gmail.com> wrote:
>   
>> Thank tiago for help and shared the link, the problem was solved and I'm
>> having success in Ecuador with Pacifictel.
>>
>> Thanks guys and many thanks to moy for build openr2
>>
>> Tiago Durante wrote:
>>
>> Alfredo,
>>
>> I believe that we've a lot of spanish and also portuguese speakers
>> here in this list. But also I believe that english is the official
>> language, as Digium, who supports the list, is an American company.
>>
>> If you can't communicate in english then you may send the mails in
>> spanish...
>>
>> ---
>>
>> Going back to your problem...
>>
>> First of all: what do you have there and what do you want to do?
>>
>> Because it seems like you didn't install you Asterisk in the right way...
>>
>> You may want to take a look in this short how to:
>>
>> http://lists.digium.com/pipermail/asterisk-r2/2008-October/000078.html
>>
>>
>>
>> best regards,
>>
>>
>>
>>
>> On Tue, Nov 11, 2008 at 4:31 PM, Alfredo Andaluz Prado
>> <devilsoulblack at gmail.com> wrote:
>>
>>
>> when used mfcr2 show channels this give me no such command
>>
>>
>> PD: ist possible send message to the asterisk-r2 list using my native
>> lenguaje "spanish" ?
>>
>>
>>
>> cnt-e1r2-gye*CLI> mfcr2 show channels
>> No such command 'mfcr2 show channels' (type 'help mfcr2 show' for other
>> possible commands)
>> cnt-e1r2-gye*CLI>
>>
>>
>> Moises Silva wrote:
>>
>> pri show span is for, hum, PRI lines.
>>
>> You have R2 lines here, not PRI lines.
>>
>> All commands related to mfcr2 start with mfcr2.
>>
>> "mfcr2 show channels" will show you the status of the lines.
>>
>> "mfcr2 set debug all" will enable all debug messages for all channels.
>> You still need to enable debug in /etc/asterisk/logger.conf
>>
>> "mfcr2 set debug all 1" will enable all debug messages for channel 1 only.
>>
>> Read the configuration sample for chan dahdi or chan zap in configs/
>> asterisk directory for more information on logging.
>>
>>
>> On Tue, Nov 11, 2008 at 2:48 PM, Alfredo Andaluz Prado
>> <devilsoulblack at gmail.com> wrote:
>>
>>
>> i try to use pri show span 1 but "No such command" i use svn checkout
>> http://svn.digium.com/svn/asterisk/team/moy/mfcr2-1.4 for asterisk any idea
>> how show intensive debug opcion over E1 R2 ?
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>
>>
>>
>>
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>
>>
>>
>>
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>
>>     
>
>
>
>   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-r2/attachments/20081114/dda20123/attachment.htm