[asterisk-r2] OpenR2 vs Siemens
Tiago Durante
tiagodurante at gmail.com
Tue Nov 4 12:20:30 CST 2008
here: http://www.pastebin.ca/1245127
thanks!
[]s
On Tue, Nov 4, 2008 at 1:17 PM, Melcon Moraes <melcon at gmail.com> wrote:
> "Hit send early, hit send often" as they say.
>
> I meant "post the logs"
>
> -MM
>
> On Tue, Nov 4, 2008 at 4:15 PM, Melcon Moraes <melcon at gmail.com> wrote:
>> The line wrapping is really annoying. Would you please post the longs
>> onto some pastebin? Ex.: www.pastebin.ca
>>
>> -MM
>>
>> On Tue, Nov 4, 2008 at 3:36 PM, Tiago Durante <tiagodurante at gmail.com> wrote:
>>> Hi all,
>>>
>>> I'm having a really strange problem here... As I said I'm trying to
>>> connect an Asterisk to a Siemens using E1/R2.
>>>
>>> It's working fine when I try to reach my internal extensions, that has
>>> 5 digits. Example: 46202.
>>>
>>> But when I try to call longer numbers, like PSTN, it doesn't work. It
>>> just call 5 digits.
>>>
>>>
>>> Down here you can see me trying to call from the SIP/6969 to the PSTN
>>> DAHDI/30403200.
>>>
>>> This call comes from a Polycom SIP -> Asterisk -> e1/r2 -> Siemens.
>>>
>>> But I don't know why it just call 5 digits. See:
>>>
>>>
>>> == Using SIP RTP CoS mark 5
>>> -- Executing [830403200 at out-e1:1] Dial("SIP/6969-08265190",
>>> "DAHDI/g0/30403200,30,tT") in new stack
>>> [Nov 4 15:26:55] DEBUG[7021]: chan_dahdi.c:1199
>>> dahdi_r2_get_channel_category: No MFC/R2 category specified for chan
>>> DAHDI/1-1, using default National Subscriber
>>> [Nov 4 15:26:55] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - Attempting to make call (ANI=6969, DNIS=30403200,
>>> category=National Subscriber)
>>> [Nov 4 15:26:55] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - ABCD Tx >> [SEIZE] 0x00
>>> [Nov 4 15:26:55] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - ABCD Raw Tx >> 0x01
>>> -- Called g0/30403200
>>> [Nov 4 15:26:55] DEBUG[7021]: chan_dahdi.c:5173 dahdi_handle_event:
>>> bits changed in chan 1
>>> [Nov 4 15:26:55] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - Bits changed from 0x08 to 0x0C
>>> [Nov 4 15:26:55] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - ABCD Rx << [SEIZE ACK] 0x0C
>>> [Nov 4 15:26:55] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - Sending DNIS digit 3
>>> [Nov 4 15:26:55] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Tx >> 3 [ON]
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Rx << 1 [ON]
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Tx >> 3 [OFF]
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Rx << 1 [OFF]
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - Sending DNIS digit 0
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Tx >> 0 [ON]
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Rx << 1 [ON]
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Tx >> 0 [OFF]
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Rx << 1 [OFF]
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - Sending DNIS digit 4
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Tx >> 4 [ON]
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Rx << 1 [ON]
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Tx >> 4 [OFF]
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Rx << 1 [OFF]
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - Sending DNIS digit 0
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Tx >> 0 [ON]
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Rx << 1 [ON]
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Tx >> 0 [OFF]
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Rx << 1 [OFF]
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - Sending DNIS digit 3
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Tx >> 3 [ON]
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Rx << 5 [ON]
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Tx >> 3 [OFF]
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Rx << 5 [OFF]
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - Sending category National Subscriber
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Tx >> 1 [ON]
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Rx << 5 [ON]
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Tx >> 1 [OFF]
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Rx << 5 [OFF]
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - Sending ANI digit 6
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Tx >> 6 [ON]
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Rx << 5 [ON]
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Tx >> 6 [OFF]
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Rx << 5 [OFF]
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - Sending ANI digit 9
>>> [Nov 4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Tx >> 9 [ON]
>>> [Nov 4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Rx << 5 [ON]
>>> [Nov 4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Tx >> 9 [OFF]
>>> [Nov 4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Rx << 5 [OFF]
>>> [Nov 4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - Sending ANI digit 6
>>> [Nov 4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Tx >> 6 [ON]
>>> [Nov 4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Rx << 5 [ON]
>>> [Nov 4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Tx >> 6 [OFF]
>>> [Nov 4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Rx << 5 [OFF]
>>> [Nov 4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - Sending ANI digit 9
>>> [Nov 4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Tx >> 9 [ON]
>>> [Nov 4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Rx << 5 [ON]
>>> [Nov 4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Tx >> 9 [OFF]
>>> [Nov 4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Rx << 5 [OFF]
>>> [Nov 4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - Sending more ANI unavailable
>>> [Nov 4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Tx >> F [ON]
>>> [Nov 4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Rx << 3 [ON]
>>> [Nov 4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Tx >> F [OFF]
>>> [Nov 4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Rx << 3 [OFF]
>>> [Nov 4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - Sending category National Subscriber
>>> [Nov 4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Tx >> 1 [ON]
>>> [Nov 4 15:27:02] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Rx << 7 [ON]
>>> [Nov 4 15:27:02] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Tx >> 1 [OFF]
>>> [Nov 4 15:27:02] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - MF Rx << 7 [OFF]
>>> [Nov 4 15:27:02] NOTICE[7021]: chan_dahdi.c:1590 dahdi_r2_write_log:
>>> Chan 1 - Far end disconnected. Reason: Collect Call Rejected
>>> [Nov 4 15:27:02] NOTICE[7021]: chan_dahdi.c:1547
>>> dahdi_r2_on_call_disconnect: MFC/R2 call disconnected on chan 1
>>> [Nov 4 15:27:02] DEBUG[7021]: chan_dahdi.c:3997 dahdi_hangup:
>>> disconnecting MFC/R2 call on chan 1
>>> [Nov 4 15:27:02] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - ABCD Tx >> [CLEAR FORWARD] 0x08
>>> [Nov 4 15:27:02] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - ABCD Raw Tx >> 0x09
>>> -- Hungup 'DAHDI/1-1'
>>> == Everyone is busy/congested at this time (1:0/0/1)
>>> -- Auto fallthrough, channel 'SIP/6969-08265190' status is 'CHANUNAVAIL'
>>> [Nov 4 15:27:03] DEBUG[3405]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - Bits changed from 0x0C to 0x08
>>> [Nov 4 15:27:03] DEBUG[3405]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - ABCD Rx << [IDLE] 0x08
>>> [Nov 4 15:27:03] DEBUG[3405]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - Call ended
>>> [Nov 4 15:27:03] DEBUG[3405]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - ABCD Tx >> [IDLE] 0x08
>>> [Nov 4 15:27:03] DEBUG[3405]: chan_dahdi.c:1602 dahdi_r2_write_log:
>>> Chan 1 - ABCD Raw Tx >> 0x09
>>> [Nov 4 15:27:03] NOTICE[3405]: chan_dahdi.c:1459
>>> dahdi_r2_on_call_end: MFC/R2 call end on chan 1
>>>
>>>
>>> here is my dial for this:
>>>
>>> [out-e1]
>>> exten => _8XXXXX.,1,Dial(DAHDI/g0/${EXTEN:1},30,tT)
>>>
>>>
>>> and confs:
>>>
>>> /etc/asterisk# cat chan_dahdi.conf
>>> [trunkgroups]
>>>
>>> [channels]
>>> usecallerid=yes
>>> callwaiting=yes
>>> usecallingpres=yes
>>> callwaitingcallerid=yes
>>> threewaycalling=yes
>>> transfer=yes
>>> canpark=yes
>>> cancallforward=yes
>>> callreturn=yes
>>> echocancel=yes
>>> echocancelwhenbridged=yes
>>>
>>> signalling=mfcr2
>>> mfcr2_variant=br
>>> mfcr2_get_ani_first=no
>>> mfcr2_max_ani=20
>>> mfcr2_max_dnis=20
>>> mfcr2_category=national_subscriber
>>> mfcr2_logdir=span1
>>> mfcr2_logging=all
>>>
>>> context=in-e1
>>> group=0
>>> callgroup=0
>>> pickupgroup=0
>>> channel => 1-15
>>> channel => 17-31
>>>
>>> -----
>>>
>>> /etc/dahdi# cat system.conf
>>> loadzone = br
>>> defaultzone =br
>>>
>>> span=1,1,0,cas,hdb3
>>> echocanceller=mg2,1-15,17-31
>>> cas=1-15:1101
>>> cas=17-31:1101
>>> dchan=16
>>>
>>>
>>> ANY ideas?
>>>
>>>
>>> Thanks guys!
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> On Wed, Oct 29, 2008 at 2:41 PM, Alexandre Cavalcante Alencar
>>> <alexandre.alencar at gmail.com> wrote:
>>>> Hi all,
>>>>
>>>> Try all echo cancelers available and choice the best one. If you have a
>>>> digium board, try to install HPEC. There are a OSLEC that is good too (for
>>>> some cases).
>>>>
>>>> Regards
>>>>
>>>> On Wed, Oct 29, 2008 at 4:13 PM, Tiago Durante <tiagodurante at gmail.com>
>>>> wrote:
>>>>>
>>>>> Thank you Alexandre, worked like a charm!
>>>>>
>>>>> Also I added the line: "echocanceller=mg2,1-15,17-31" to system.conf
>>>>> and the echo is lighter now, but still there...
>>>>>
>>>>> I'll study a little about this tag, echocanceller, to see if I can
>>>>> improve my system...
>>>>>
>>>>>
>>>>> Best regards,
>>>>>
>>>>>
>>>>> Tiago Durante
>>>>>
>>>>> On Wed, Oct 29, 2008 at 1:46 PM, Alexandre Cavalcante Alencar
>>>>> <alexandre.alencar at gmail.com> wrote:
>>>>> > Hi all,
>>>>> >
>>>>> >
>>>>> > On Tue, Oct 28, 2008 at 12:35 PM, Tiago Durante <tiagodurante at gmail.com>
>>>>> > wrote:
>>>>> >>
>>>>> >> Hi all!
>>>>> >>
>>>>> >
>>>>> > <snip>
>>>>> >
>>>>> >>
>>>>> >> All righ, lets go by steps. First I'm having this error when I start
>>>>> >> Asterisk:
>>>>> >>
>>>>> >> ERROR[32631]: codec_dahdi.c:432 find_transcoders: Failed to open
>>>>> >> /dev/dahdi/transcode: No such file or directory
>>>>> >
>>>>> >
>>>>> > You are using DAHDI and you should load the dahdi_transcode module into
>>>>> > the
>>>>> > kernel. To do so, issue
>>>>> >
>>>>> > # modprobe dahdi_transcode
>>>>> > # /etc/init.d/asterisk stop
>>>>> > # /etc/init.d/asterisk start
>>>>> >
>>>>> > You must edit the /etc/dahdi/modules and add a line to make DAHDI load
>>>>> > the
>>>>> > dahdi_transcode before the cards modules. Just add a line to look like
>>>>> > this
>>>>> >
>>>>> > # Contains the list of modules to be loaded / unloaded by
>>>>> > /etc/init.d/dahdi.
>>>>> > #
>>>>> > # NOTE: Please add/edit /etc/modprobe.d/dahdi or /etc/modprobe.conf if
>>>>> > you
>>>>> > # would like to add any module parameters.
>>>>> > #
>>>>> > # Format of this file: list of modules, each in its own line.
>>>>> > # Anything after a '#' is ignore, likewise trailing and leading
>>>>> > # whitespaces and empty lines.
>>>>> >
>>>>> > # DAHDI Transcode Module
>>>>> > dahdi_transcode
>>>>> >
>>>>> > # Digium TE205P/TE207P/TE210P/TE212P: PCI dual-port T1/E1/J1
>>>>> > # Digium TE405P/TE407P/TE410P/TE412P: PCI quad-port T1/E1/J1
>>>>> > # Digium TE220: PCI-Express dual-port T1/E1/J1
>>>>> > # Digium TE420: PCI-Express quad-port T1/E1/J1
>>>>> > wct4xxp
>>>>> >
>>>>> > ....
>>>>> >
>>>>> >
>>>>> > Best regards
>>>>> >
>>>>> >>
>>>>> >> And this warning when I call a extension at Siemens:
>>>>> >>
>>>>> >> WARNING[32744]: chan_dahdi.c:1938 dahdi_enable_ec: Unable to enable
>>>>> >> echo cancellation on channel 1 (No such device)
>>>>> >>
>>>>> >> Every time I call a extension on Siemens I've some mute moments for
>>>>> >> some of the call parts. It's quick, 4 to 8 seconds, but makes
>>>>> >> impossible to talk. And the caller has echo, always. It isn't a strong
>>>>> >> echo, but still.
>>>>> >>
>>>>> >> Another thing that is happening is that I just can call 5 digits
>>>>> >> numbers at Siemens, I think its a problem with the configuration at
>>>>> >> Siemens side, I already called the company responsible for the
>>>>> >> equipment to check if there is something wrong there.
>>>>> >>
>>>>> >> I've tried a several configurations until y-day when I got it working
>>>>> >> with Asterisk 1.4.22, DAHDI 2 and libOpenR2 0.1.1 - The most strange
>>>>> >> thing is that in a first moment using Asterisk 1.6 Beta and zaptel 1.4
>>>>> >> it worked close to perfectly, lets say 97%. And now I'm having this
>>>>> >> issues.
>>>>> >>
>>>>> >> I'm used to Asterisk and analog channels. But it's my first E1 and
>>>>> >> I've to confess that I'm not an expert, so maybe I'm missing something
>>>>> >> stupid here... I've a lot of doubts, so ...
>>>>> >>
>>>>> >>
>>>>> >> ---
>>>>> >>
>>>>> >> My conf:
>>>>> >>
>>>>> >> /etc/dahdi# cat system.conf
>>>>> >> loadzone = br
>>>>> >> defaultzone =br
>>>>> >>
>>>>> >> span=1,1,0,cas,hdb3
>>>>> >> cas=1-15:1101
>>>>> >> cas=17-31:1101
>>>>> >> dchan=16
>>>>> >>
>>>>> >>
>>>>> >> ---
>>>>> >>
>>>>> >> /etc/asterisk# cat chan_dahdi.conf
>>>>> >> [trunkgroups]
>>>>> >>
>>>>> >> [channels]
>>>>> >> usecallerid=yes
>>>>> >> callwaiting=yes
>>>>> >> usecallingpres=yes
>>>>> >> callwaitingcallerid=yes
>>>>> >> threewaycalling=yes
>>>>> >> transfer=yes
>>>>> >> canpark=yes
>>>>> >> cancallforward=yes
>>>>> >> callreturn=yes
>>>>> >> echocancel=yes
>>>>> >> echocancelwhenbridged=yes
>>>>> >>
>>>>> >> signalling=mfcr2
>>>>> >> mfcr2_variant=br
>>>>> >> mfcr2_get_ani_first=no
>>>>> >> mfcr2_max_ani=20
>>>>> >> mfcr2_max_dnis=20
>>>>> >> mfcr2_category=national_subscriber
>>>>> >> mfcr2_logdir=span1
>>>>> >> mfcr2_logging=all
>>>>> >>
>>>>> >> context=in-e1
>>>>> >> group=0
>>>>> >> callgroup=0
>>>>> >> pickupgroup=0
>>>>> >> channel => 1-15
>>>>> >> channel => 17-31
>>>>> >>
>>>>> >> ---
>>>>> >>
>>>>> >> cat /proc/interrupts
>>>>> >> CPU0
>>>>> >> 0: 74 IO-APIC-edge timer
>>>>> >> 1: 2 IO-APIC-edge i8042
>>>>> >> 6: 5 IO-APIC-edge floppy
>>>>> >> 7: 0 IO-APIC-edge parport0
>>>>> >> 8: 3 IO-APIC-edge rtc
>>>>> >> 9: 0 IO-APIC-fasteoi acpi
>>>>> >> 12: 4 IO-APIC-edge i8042
>>>>> >> 14: 651656 IO-APIC-edge ide0
>>>>> >> 16: 338990 IO-APIC-fasteoi eth0
>>>>> >> 17: 68622371 IO-APIC-fasteoi wcte11xp
>>>>> >> 18: 39496 IO-APIC-fasteoi libata
>>>>> >> 19: 2 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2
>>>>> >> 20: 0 IO-APIC-fasteoi uhci_hcd:usb3
>>>>> >> 21: 0 IO-APIC-fasteoi uhci_hcd:usb4
>>>>> >> 22: 37 IO-APIC-fasteoi uhci_hcd:usb5, Intel ICH6
>>>>> >> NMI: 0 Non-maskable interrupts
>>>>> >> LOC: 18269790 Local timer interrupts
>>>>> >> RES: 0 Rescheduling interrupts
>>>>> >> CAL: 0 function call interrupts
>>>>> >> TLB: 0 TLB shootdowns
>>>>> >> TRM: 0 Thermal event interrupts
>>>>> >> SPU: 0 Spurious interrupts
>>>>> >> ERR: 0
>>>>> >> MIS: 0
>>>>> >>
>>>>> >> ---
>>>>> >>
>>>>> >> # dahdi_speed
>>>>> >> Count: 891909
>>>>> >>
>>>>> >> # dahdi_test
>>>>> >> Opened pseudo dahdi interface, measuring accuracy...
>>>>> >> 99.973045% 99.968651% 99.972649% 99.972557% 99.972656% 99.972748%
>>>>> >> 99.972168%
>>>>> >> 99.972565% 99.971596% 99.972656% 99.973045% 99.972359% 99.972359%
>>>>> >> 99.972466% 99.972656%
>>>>> >> 99.973053% 99.971870% 99.972557%
>>>>> >> --- Results after 18 passes ---
>>>>> >> Best: 99.973 -- Worst: 99.969 -- Average: 99.972314, Difference:
>>>>> >> 99.972315
>>>>> >>
>>>>> >> # dahdi_scan
>>>>> >> [1]
>>>>> >> active=yes
>>>>> >> alarms=OK
>>>>> >> description=Digium Wildcard TE110P T1/E1 Card 0
>>>>> >> name=WCT1/0
>>>>> >> manufacturer=Digium
>>>>> >> devicetype=Digium Wildcard TE110P T1/E1
>>>>> >> location=PCI Bus 04 Slot 02
>>>>> >> basechan=1
>>>>> >> totchans=31
>>>>> >> irq=17
>>>>> >> type=digital-E1
>>>>> >> syncsrc=0
>>>>> >> lbo=0 db (CSU)/0-133 feet (DSX-1)
>>>>> >> coding_opts=HDB3
>>>>> >> framing_opts=CCS,CRC4
>>>>> >> coding=HDB3
>>>>> >> framing=
>>>>> >>
>>>>> >>
>>>>> >>
>>>>> >>
>>>>> >>
>>>>> >> Please, if there is any other information that you guys need just let
>>>>> >> me know that I post here.
>>>>> >>
>>>>> >> Thank you very much!
>>>>> >>
>>>>> >> regards,
>>>>> >>
>>>>> >>
>>>>> >> --
>>>>> >> Tiago Durante
>>>>> >>
>>>>> >> ,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,
>>>>> >> Perseverance is the hard work you do after you
>>>>> >> get tired of doing the hard work you already did.
>>>>> >> -- Newt Gingrich
>>>>> >>
>>>>> >> _______________________________________________
>>>>> >> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>> >>
>>>>> >> asterisk-r2 mailing list
>>>>> >> To UNSUBSCRIBE or update options visit:
>>>>> >> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>> >
>>>>> >
>>>>> >
>>>>> > --
>>>>> > Alexandre C Alencar (Skarmeth)
>>>>> > http://blog.alexandrealencar.net/
>>>>> > http://www.alexandrealencar.net/
>>>>> > http://people.debian-ce.org/skarmeth/
>>>>> >
>>>>> >
>>>>> > _______________________________________________
>>>>> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>> >
>>>>> > asterisk-r2 mailing list
>>>>> > To UNSUBSCRIBE or update options visit:
>>>>> > http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>> >
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Tiago Durante
>>>>>
>>>>> ,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,
>>>>> Perseverance is the hard work you do after you
>>>>> get tired of doing the hard work you already did.
>>>>> -- Newt Gingrich
>>>>>
>>>>> _______________________________________________
>>>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>>
>>>>> asterisk-r2 mailing list
>>>>> To UNSUBSCRIBE or update options visit:
>>>>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>
>>>>
>>>>
>>>> --
>>>> Alexandre C Alencar (Skarmeth)
>>>> http://blog.alexandrealencar.net/
>>>> http://www.alexandrealencar.net/
>>>> http://people.debian-ce.org/skarmeth/
>>>>
>>>>
>>>> _______________________________________________
>>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>>
>>>> asterisk-r2 mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>
>>>
>>>
>>>
>>> --
>>> Tiago Durante
>>>
>>> ,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,
>>> Perseverance is the hard work you do after you
>>> get tired of doing the hard work you already did.
>>> -- Newt Gingrich
>>>
>>> _______________________________________________
>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>
>>> asterisk-r2 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>
>>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-r2
>
--
Tiago Durante
,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,
Perseverance is the hard work you do after you
get tired of doing the hard work you already did.
-- Newt Gingrich
More information about the asterisk-r2
mailing list