[asterisk-r2] OpenR2 vs Siemens

Melcon Moraes melcon at gmail.com
Tue Nov 4 12:15:33 CST 2008 

The line wrapping is really annoying. Would you please post the longs
onto some pastebin? Ex.: www.pastebin.ca

-MM

On Tue, Nov 4, 2008 at 3:36 PM, Tiago Durante <tiagodurante at gmail.com> wrote:
> Hi all,
>
> I'm having a really strange problem here... As I said I'm trying to
> connect an Asterisk to a Siemens using E1/R2.
>
> It's working fine when I try to reach my internal extensions, that has
> 5 digits. Example: 46202.
>
> But when I try to call longer numbers, like PSTN, it doesn't work. It
> just call 5 digits.
>
>
> Down here you can see me trying to call from the SIP/6969 to the PSTN
> DAHDI/30403200.
>
> This call comes from a Polycom SIP -> Asterisk -> e1/r2 -> Siemens.
>
> But I don't know why it just call 5 digits. See:
>
>
>  == Using SIP RTP CoS mark 5
>    -- Executing [830403200 at out-e1:1] Dial("SIP/6969-08265190",
> "DAHDI/g0/30403200,30,tT") in new stack
> [Nov  4 15:26:55] DEBUG[7021]: chan_dahdi.c:1199
> dahdi_r2_get_channel_category: No MFC/R2 category specified for chan
> DAHDI/1-1, using default National Subscriber
> [Nov  4 15:26:55] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - Attempting to make call (ANI=6969, DNIS=30403200,
> category=National Subscriber)
> [Nov  4 15:26:55] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - ABCD Tx >> [SEIZE] 0x00
> [Nov  4 15:26:55] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - ABCD Raw Tx >> 0x01
>    -- Called g0/30403200
> [Nov  4 15:26:55] DEBUG[7021]: chan_dahdi.c:5173 dahdi_handle_event:
> bits changed in chan 1
> [Nov  4 15:26:55] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - Bits changed from 0x08 to 0x0C
> [Nov  4 15:26:55] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - ABCD Rx << [SEIZE ACK] 0x0C
> [Nov  4 15:26:55] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - Sending DNIS digit 3
> [Nov  4 15:26:55] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Tx >> 3 [ON]
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Rx << 1 [ON]
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Tx >> 3 [OFF]
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Rx << 1 [OFF]
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - Sending DNIS digit 0
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Tx >> 0 [ON]
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Rx << 1 [ON]
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Tx >> 0 [OFF]
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Rx << 1 [OFF]
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - Sending DNIS digit 4
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Tx >> 4 [ON]
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Rx << 1 [ON]
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Tx >> 4 [OFF]
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Rx << 1 [OFF]
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - Sending DNIS digit 0
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Tx >> 0 [ON]
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Rx << 1 [ON]
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Tx >> 0 [OFF]
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Rx << 1 [OFF]
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - Sending DNIS digit 3
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Tx >> 3 [ON]
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Rx << 5 [ON]
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Tx >> 3 [OFF]
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Rx << 5 [OFF]
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - Sending category National Subscriber
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Tx >> 1 [ON]
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Rx << 5 [ON]
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Tx >> 1 [OFF]
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Rx << 5 [OFF]
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - Sending ANI digit 6
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Tx >> 6 [ON]
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Rx << 5 [ON]
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Tx >> 6 [OFF]
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Rx << 5 [OFF]
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - Sending ANI digit 9
> [Nov  4 15:26:56] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Tx >> 9 [ON]
> [Nov  4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Rx << 5 [ON]
> [Nov  4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Tx >> 9 [OFF]
> [Nov  4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Rx << 5 [OFF]
> [Nov  4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - Sending ANI digit 6
> [Nov  4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Tx >> 6 [ON]
> [Nov  4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Rx << 5 [ON]
> [Nov  4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Tx >> 6 [OFF]
> [Nov  4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Rx << 5 [OFF]
> [Nov  4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - Sending ANI digit 9
> [Nov  4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Tx >> 9 [ON]
> [Nov  4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Rx << 5 [ON]
> [Nov  4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Tx >> 9 [OFF]
> [Nov  4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Rx << 5 [OFF]
> [Nov  4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - Sending more ANI unavailable
> [Nov  4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Tx >> F [ON]
> [Nov  4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Rx << 3 [ON]
> [Nov  4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Tx >> F [OFF]
> [Nov  4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Rx << 3 [OFF]
> [Nov  4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - Sending category National Subscriber
> [Nov  4 15:26:57] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Tx >> 1 [ON]
> [Nov  4 15:27:02] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Rx << 7 [ON]
> [Nov  4 15:27:02] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Tx >> 1 [OFF]
> [Nov  4 15:27:02] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - MF Rx << 7 [OFF]
> [Nov  4 15:27:02] NOTICE[7021]: chan_dahdi.c:1590 dahdi_r2_write_log:
> Chan 1 - Far end disconnected. Reason: Collect Call Rejected
> [Nov  4 15:27:02] NOTICE[7021]: chan_dahdi.c:1547
> dahdi_r2_on_call_disconnect: MFC/R2 call disconnected on chan 1
> [Nov  4 15:27:02] DEBUG[7021]: chan_dahdi.c:3997 dahdi_hangup:
> disconnecting MFC/R2 call on chan 1
> [Nov  4 15:27:02] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - ABCD Tx >> [CLEAR FORWARD] 0x08
> [Nov  4 15:27:02] DEBUG[7021]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - ABCD Raw Tx >> 0x09
>    -- Hungup 'DAHDI/1-1'
>  == Everyone is busy/congested at this time (1:0/0/1)
>    -- Auto fallthrough, channel 'SIP/6969-08265190' status is 'CHANUNAVAIL'
> [Nov  4 15:27:03] DEBUG[3405]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - Bits changed from 0x0C to 0x08
> [Nov  4 15:27:03] DEBUG[3405]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - ABCD Rx << [IDLE] 0x08
> [Nov  4 15:27:03] DEBUG[3405]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - Call ended
> [Nov  4 15:27:03] DEBUG[3405]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - ABCD Tx >> [IDLE] 0x08
> [Nov  4 15:27:03] DEBUG[3405]: chan_dahdi.c:1602 dahdi_r2_write_log:
> Chan 1 - ABCD Raw Tx >> 0x09
> [Nov  4 15:27:03] NOTICE[3405]: chan_dahdi.c:1459
> dahdi_r2_on_call_end: MFC/R2 call end on chan 1
>
>
> here is my dial for this:
>
> [out-e1]
> exten => _8XXXXX.,1,Dial(DAHDI/g0/${EXTEN:1},30,tT)
>
>
> and confs:
>
> /etc/asterisk# cat chan_dahdi.conf
> [trunkgroups]
>
> [channels]
> usecallerid=yes
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
>
> signalling=mfcr2
> mfcr2_variant=br
> mfcr2_get_ani_first=no
> mfcr2_max_ani=20
> mfcr2_max_dnis=20
> mfcr2_category=national_subscriber
> mfcr2_logdir=span1
> mfcr2_logging=all
>
> context=in-e1
> group=0
> callgroup=0
> pickupgroup=0
> channel => 1-15
> channel => 17-31
>
> -----
>
> /etc/dahdi# cat system.conf
> loadzone = br
> defaultzone =br
>
> span=1,1,0,cas,hdb3
> echocanceller=mg2,1-15,17-31
> cas=1-15:1101
> cas=17-31:1101
> dchan=16
>
>
> ANY ideas?
>
>
> Thanks guys!
>
>
>
>
>
>
>
> On Wed, Oct 29, 2008 at 2:41 PM, Alexandre Cavalcante Alencar
> <alexandre.alencar at gmail.com> wrote:
>> Hi all,
>>
>> Try all echo cancelers available and choice the best one. If you have a
>> digium board, try to install HPEC. There are a OSLEC that is good too (for
>> some cases).
>>
>> Regards
>>
>> On Wed, Oct 29, 2008 at 4:13 PM, Tiago Durante <tiagodurante at gmail.com>
>> wrote:
>>>
>>> Thank you Alexandre, worked like a charm!
>>>
>>> Also I added the line: "echocanceller=mg2,1-15,17-31" to system.conf
>>> and the echo is lighter now, but still there...
>>>
>>> I'll study a little about this tag, echocanceller, to see if I can
>>> improve my system...
>>>
>>>
>>> Best regards,
>>>
>>>
>>> Tiago Durante
>>>
>>> On Wed, Oct 29, 2008 at 1:46 PM, Alexandre Cavalcante Alencar
>>> <alexandre.alencar at gmail.com> wrote:
>>> > Hi all,
>>> >
>>> >
>>> > On Tue, Oct 28, 2008 at 12:35 PM, Tiago Durante <tiagodurante at gmail.com>
>>> > wrote:
>>> >>
>>> >> Hi all!
>>> >>
>>> >
>>> > <snip>
>>> >
>>> >>
>>> >> All righ, lets go by steps. First I'm having this error when I start
>>> >> Asterisk:
>>> >>
>>> >> ERROR[32631]: codec_dahdi.c:432 find_transcoders: Failed to open
>>> >> /dev/dahdi/transcode: No such file or directory
>>> >
>>> >
>>> > You are using DAHDI and you should load the dahdi_transcode module into
>>> > the
>>> > kernel. To do so, issue
>>> >
>>> > # modprobe dahdi_transcode
>>> > # /etc/init.d/asterisk stop
>>> > # /etc/init.d/asterisk start
>>> >
>>> > You must edit the /etc/dahdi/modules and add a line to make DAHDI load
>>> > the
>>> > dahdi_transcode before the cards modules. Just add a line to look like
>>> > this
>>> >
>>> > # Contains the list of modules to be loaded / unloaded by
>>> > /etc/init.d/dahdi.
>>> > #
>>> > # NOTE:  Please add/edit /etc/modprobe.d/dahdi or /etc/modprobe.conf if
>>> > you
>>> > #        would like to add any module parameters.
>>> > #
>>> > # Format of this file: list of modules, each in its own line.
>>> > # Anything after a '#' is ignore, likewise trailing and leading
>>> > # whitespaces and empty lines.
>>> >
>>> > # DAHDI Transcode Module
>>> > dahdi_transcode
>>> >
>>> > # Digium TE205P/TE207P/TE210P/TE212P: PCI dual-port T1/E1/J1
>>> > # Digium TE405P/TE407P/TE410P/TE412P: PCI quad-port T1/E1/J1
>>> > # Digium TE220: PCI-Express dual-port T1/E1/J1
>>> > # Digium TE420: PCI-Express quad-port T1/E1/J1
>>> > wct4xxp
>>> >
>>> > ....
>>> >
>>> >
>>> > Best regards
>>> >
>>> >>
>>> >> And this warning when I call a extension at Siemens:
>>> >>
>>> >> WARNING[32744]: chan_dahdi.c:1938 dahdi_enable_ec: Unable to enable
>>> >> echo cancellation on channel 1 (No such device)
>>> >>
>>> >> Every time I call a extension on Siemens I've some mute moments for
>>> >> some of the call parts. It's quick, 4 to 8 seconds, but makes
>>> >> impossible to talk. And the caller has echo, always. It isn't a strong
>>> >> echo, but still.
>>> >>
>>> >> Another thing that is happening is that I just can call 5 digits
>>> >> numbers at Siemens, I think its a problem with the configuration at
>>> >> Siemens side, I already called the company responsible for the
>>> >> equipment to check if there is something wrong there.
>>> >>
>>> >> I've tried a several configurations until y-day when I got it working
>>> >> with Asterisk 1.4.22, DAHDI 2 and libOpenR2 0.1.1 - The most strange
>>> >> thing is that in a first moment using Asterisk 1.6 Beta and zaptel 1.4
>>> >> it worked close to perfectly, lets say 97%. And now I'm having this
>>> >> issues.
>>> >>
>>> >> I'm used to Asterisk and analog channels. But it's my first E1 and
>>> >> I've to confess that I'm not an expert, so maybe I'm missing something
>>> >> stupid here... I've a lot of doubts, so ...
>>> >>
>>> >>
>>> >> ---
>>> >>
>>> >> My conf:
>>> >>
>>> >> /etc/dahdi# cat system.conf
>>> >> loadzone = br
>>> >> defaultzone =br
>>> >>
>>> >> span=1,1,0,cas,hdb3
>>> >> cas=1-15:1101
>>> >> cas=17-31:1101
>>> >> dchan=16
>>> >>
>>> >>
>>> >> ---
>>> >>
>>> >> /etc/asterisk# cat chan_dahdi.conf
>>> >> [trunkgroups]
>>> >>
>>> >> [channels]
>>> >> usecallerid=yes
>>> >> callwaiting=yes
>>> >> usecallingpres=yes
>>> >> callwaitingcallerid=yes
>>> >> threewaycalling=yes
>>> >> transfer=yes
>>> >> canpark=yes
>>> >> cancallforward=yes
>>> >> callreturn=yes
>>> >> echocancel=yes
>>> >> echocancelwhenbridged=yes
>>> >>
>>> >> signalling=mfcr2
>>> >> mfcr2_variant=br
>>> >> mfcr2_get_ani_first=no
>>> >> mfcr2_max_ani=20
>>> >> mfcr2_max_dnis=20
>>> >> mfcr2_category=national_subscriber
>>> >> mfcr2_logdir=span1
>>> >> mfcr2_logging=all
>>> >>
>>> >> context=in-e1
>>> >> group=0
>>> >> callgroup=0
>>> >> pickupgroup=0
>>> >> channel => 1-15
>>> >> channel => 17-31
>>> >>
>>> >> ---
>>> >>
>>> >> cat /proc/interrupts
>>> >>           CPU0
>>> >>  0:         74   IO-APIC-edge      timer
>>> >>  1:          2   IO-APIC-edge      i8042
>>> >>  6:          5   IO-APIC-edge      floppy
>>> >>  7:          0   IO-APIC-edge      parport0
>>> >>  8:          3   IO-APIC-edge      rtc
>>> >>  9:          0   IO-APIC-fasteoi   acpi
>>> >>  12:          4   IO-APIC-edge      i8042
>>> >>  14:     651656   IO-APIC-edge      ide0
>>> >>  16:     338990   IO-APIC-fasteoi   eth0
>>> >>  17:   68622371   IO-APIC-fasteoi   wcte11xp
>>> >>  18:      39496   IO-APIC-fasteoi   libata
>>> >>  19:          2   IO-APIC-fasteoi   ehci_hcd:usb1, uhci_hcd:usb2
>>> >>  20:          0   IO-APIC-fasteoi   uhci_hcd:usb3
>>> >>  21:          0   IO-APIC-fasteoi   uhci_hcd:usb4
>>> >>  22:         37   IO-APIC-fasteoi   uhci_hcd:usb5, Intel ICH6
>>> >> NMI:          0   Non-maskable interrupts
>>> >> LOC:   18269790   Local timer interrupts
>>> >> RES:          0   Rescheduling interrupts
>>> >> CAL:          0   function call interrupts
>>> >> TLB:          0   TLB shootdowns
>>> >> TRM:          0   Thermal event interrupts
>>> >> SPU:          0   Spurious interrupts
>>> >> ERR:          0
>>> >> MIS:          0
>>> >>
>>> >> ---
>>> >>
>>> >> # dahdi_speed
>>> >> Count: 891909
>>> >>
>>> >> # dahdi_test
>>> >> Opened pseudo dahdi interface, measuring accuracy...
>>> >> 99.973045% 99.968651% 99.972649% 99.972557% 99.972656% 99.972748%
>>> >> 99.972168%
>>> >> 99.972565% 99.971596% 99.972656% 99.973045% 99.972359% 99.972359%
>>> >> 99.972466% 99.972656%
>>> >> 99.973053% 99.971870% 99.972557%
>>> >> --- Results after 18 passes ---
>>> >> Best: 99.973 -- Worst: 99.969 -- Average: 99.972314, Difference:
>>> >> 99.972315
>>> >>
>>> >> # dahdi_scan
>>> >> [1]
>>> >> active=yes
>>> >> alarms=OK
>>> >> description=Digium Wildcard TE110P T1/E1 Card 0
>>> >> name=WCT1/0
>>> >> manufacturer=Digium
>>> >> devicetype=Digium Wildcard TE110P T1/E1
>>> >> location=PCI Bus 04 Slot 02
>>> >> basechan=1
>>> >> totchans=31
>>> >> irq=17
>>> >> type=digital-E1
>>> >> syncsrc=0
>>> >> lbo=0 db (CSU)/0-133 feet (DSX-1)
>>> >> coding_opts=HDB3
>>> >> framing_opts=CCS,CRC4
>>> >> coding=HDB3
>>> >> framing=
>>> >>
>>> >>
>>> >>
>>> >>
>>> >>
>>> >> Please, if there is any other information that you guys need just let
>>> >> me know that I post here.
>>> >>
>>> >> Thank you very much!
>>> >>
>>> >> regards,
>>> >>
>>> >>
>>> >> --
>>> >> Tiago Durante
>>> >>
>>> >> ,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,
>>> >> Perseverance is the hard work you do after you
>>> >> get tired of doing the hard work you already did.
>>> >> -- Newt Gingrich
>>> >>
>>> >> _______________________________________________
>>> >> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>> >>
>>> >> asterisk-r2 mailing list
>>> >> To UNSUBSCRIBE or update options visit:
>>> >>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>> >
>>> >
>>> >
>>> > --
>>> > Alexandre C Alencar (Skarmeth)
>>> > http://blog.alexandrealencar.net/
>>> > http://www.alexandrealencar.net/
>>> > http://people.debian-ce.org/skarmeth/
>>> >
>>> >
>>> > _______________________________________________
>>> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>> >
>>> > asterisk-r2 mailing list
>>> > To UNSUBSCRIBE or update options visit:
>>> >   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>> >
>>>
>>>
>>>
>>> --
>>> Tiago Durante
>>>
>>> ,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,
>>> Perseverance is the hard work you do after you
>>> get tired of doing the hard work you already did.
>>> -- Newt Gingrich
>>>
>>> _______________________________________________
>>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>>
>>> asterisk-r2 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>
>>
>>
>> --
>> Alexandre C Alencar (Skarmeth)
>> http://blog.alexandrealencar.net/
>> http://www.alexandrealencar.net/
>> http://people.debian-ce.org/skarmeth/
>>
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>>
>
>
>
> --
> Tiago Durante
>
> ,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,
> Perseverance is the hard work you do after you
> get tired of doing the hard work you already did.
> -- Newt Gingrich
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>

More information about the asterisk-r2 mailing list