[asterisk-embedded] Address to Flash uClinux to on AADK

[Brian Alexander]

Here you is a dump of the uboot start and printenv.

U-Boot-1.1.3-ADI for Digium S800i (Nov  8 2006 - 15:03:20)

CPU:   ADSP BF537 Rev.: 0.2
Board: Digium S800i
       Support: http://www.digium.com/en/supportcenter/
Clock: VCO: 500 MHz, Core: 500 MHz, System: 125 MHz
SDRAM: 64 MB
FLASH:   8 MB
In:    serial
Out:   serial
Err:   serial
Switch: ADM6996I/IX
EthMAC: 00:0F:D3:CE:E4:D9
Net:    ADI BF537 EMAC
I2C:   ready
Hit any key to stop autoboot:  0
aadk> printenv
bootargs=root=/dev/mtdblock0 rw
bootdelay=5
baudrate=57600
loads_echo=1
autoload=no
rootpath=/romfs
hostname=BF537
ramargs=setenv bootargs root=/dev/mtdblock0 rw
nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath)
addip=setenv bootargs $(bootargs)
ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):eth0:off
ramboot=dhcp;tftpboot 0x1000000 uImage;bootm 0x1000000
netboot=tftpboot 0x1000000 uImage;bootm 0x1000000
spiboot=eeprom read 0x1000000 0x40000 $(readsize);bootm 0x1000000
nfsboot=tftpboot 0x1000000 linux;run nfsargs;run addip;bootelf
flashboot=bootm 0x20100000
update=tftpboot 0x1000000 u-boot.bin;protect off 0x20000000 0x2007FFFF;erase
0x20000000 0x2007FFFF;cp.b 0x1000000 0x20000000 $(filesize)
ethaddr=00:0f:d3:ce:e4:d9
bootfile=pxelinux.0
filesize=33e762
fileaddr=1000000
netmask=255.255.252.0
bootcmd=run spiboot
serverip=192.168.100.1
gatewayip=192.168.100.1
ipaddr=192.168.100.2
readsize=444ac9
stdin=serial
stdout=serial
stderr=serial

Environment size: 983/8188 bytes

Thanks again,
-Brian
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-embedded/attachments/20071101/d4775976/attachment.htm