[asterisk-dev] Clear a secret from sip.conf and phone sill can dial

[SAMPro]

Hi,
Thanks for your reply.
So this is normal behavior of Asterisk?

On Mon, Jul 5, 2021 at 4:28 PM Jaco Kroon <jaco at uls.co.za> wrote:

> Hi,
>
> Without secret= the phone is never challenged for authentication and the
> initial invite is accepted on that basis.
>
> You can use tcpdump or (my preference for these kind of things) sngrep to
> verify.
>
> Kind Regards,
> Jaco
>
> n 2021/07/05 13:49, SAMPro wrote:
>
> I have set an extension in sip.conf to have a password and configured the
> phone accordingly. Then I have edited the sip.conf again and removed the
> password and reload the asterisk, but the phone can dial or dialed.
>
> [1801](general)
> allow=ulaw
> dtmfmode=auto
> call-limit=2
> ;secret=pass1
>
> The similar behavior in Cisco systems is different and the phone can't
> dial or dialed.
> Using command "sip unregister" didn't resolve this.
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-dev mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-dev
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-dev/attachments/20210705/59806a3c/attachment.html>