[asterisk-dev] Compiling Asterisk 18 with Telekom AllIP mediasec patches seems to work fine / Building RPM package failed

[Matthew Fredrickson]

On Mon, Aug 3, 2020 at 4:31 AM Joshua C. Colp <jcolp at sangoma.com> wrote:
>
> On Mon, Aug 3, 2020 at 12:56 AM Michael Maier <m1278468 at mailbox.org> wrote:
>>
>> On 02.08.20 at 22:15 Joshua C. Colp wrote:
>> > On Sun, Aug 2, 2020 at 3:20 PM Michael Maier <m1278468 at mailbox.org> wrote:
>> >
>> >> Hello!
>> >>
>> >> I was successfully able to patch and compile the actual Asterisk 18
>> >> branch. While building the RPM packages, it turned out, that all devel
>> >> files (/usr/include/asterisk.h and
>> >> /usr/include/asterisk/*) are missing. Seems, that they aren't installed
>> >> any more by make install. Is this the new intended behavior?
>> >>
>> >
>> > Yes, as headers are not used by most people they were moved to a separate
>> > target. This is documented in the UPGRADE.txt document:
>> >
>> > Build
>> > ------------------
>> >  * Asterisk headers are no longer installed and uninstalled automatically when
>> >    performing a "make install" or a "make uninstall".  To install/uninstall the
>> >    headers, use "make install-headers" and "make uninstall-headers".  The headers
>> >    also continue to be uninstalled when performing a "make uninstall-all".
>> >
>> > It was actually done for Asterisk 17.
>>
>> Thanks - now I've got my first Asterisk 18 packages and I know, that mediasec most probably will work, too, with Asterisk 18. But I have to finally test it. Do you know by chance
>> when FreePBX will officially support Asterisk 18?

Asterisk 17 support was added approx 6 months after the final Asterisk
17.0.0 release.  I'd love to see support for Asterisk 18 a bit sooner
than that.  That's all I can say though for sure :-)

Matthew Fredrickson

>>
>> I don't think it would be a good idea to just change the Asterisk version without any regard of an actual FreePBX (surely, I would have to add manually new options to the additional
>> config files).
>
>
> I don't work on FreePBX so don't really have any idea of when it will be supported. As it is, 18 hasn't even had a release candidate yet.
>
> --
> Joshua C. Colp
> Asterisk Technical Lead
> Sangoma Technologies
> Check us out at www.sangoma.com and www.asterisk.org
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-dev mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-dev



-- 
Matthew Fredrickson
Digium - A Sangoma Company | Director of Open Source Software Development
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA