[asterisk-dev] pjsip: 180 Ringing contains wrong info in Remote-Party-ID

[Steve Murphy]

On Mon, May 15, 2017 at 5:36 PM, Richard Mudgett <rmudgett at digium.com>
wrote:

> There is something in your setup setting the wrong information.  My test
> setup does
> send the correct information for the 180 Ringing message.
>

​Richard--

Many thanks! This little tid-bit told me that indeed the problem was not in
the pjsip
channel driver, but rather in my dialplan. I found the culprit, an option
in the Dial()
app, that for some strange reason was necessary in chan_sip (which we have
heavily patched),
but toxic to chan_pjsip. I conditionalized its use based on the current
channel's phone
technology, and all is well!

Again, many thanks!

murf​



-- 

Steve Murphy
ParseTree Corporation
57 Lane 17
Cody, WY 82414
✉  murf at parsetree dot com
☎ 307-899-0510
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-dev/attachments/20170516/f8cfdb35/attachment.html>